Электронная библиотека (репозиторий) Томского государственного университета
Vorozhtsov, Alexander B. | 2023

Add to Quick Collection   All 10 Results

Showing items 1 - 10 of 10.
  • «
  • ←
  • 1
  • →
  • »
Sort:
 Add All Items to Quick Collection
Add   Strength characteristics of a heat-resistant metal-matrix composite inconel 625–5%NiTi–TiB2 alloy fabricated by direct laser deposition under shock-wave loading
Authors: Razorenov, Sergey V. | Garkushin, Gennady V. | Savinykh, Andrey S. | Promakhov, Vladimir V. | Matveev, Alexey E. | Klimova-Korsmik, Olga G. | Vorozhtsov, Alexander B.
Source: Metals. 2023. Vol. 13, № 3. P. 477 (1-9)
Type: статьи в журналах
Date: 2023
Description: The Hugoniot elastic limit and spall strength were measured for a heat-resistant metalmatrix composite Inconel 625–5%NiTi–TiB2 alloy additive manufactured (AM) by direct laser deposition. The strength ... More
Add   Structure and frictional properties of ultrahard AlMgB14 thin coatings
Authors: Tkachev, Dmitriy | Zhukov, Ilya A. | Nikitin, Pavel Yu. | Sachkov, Victor Ivanovich | Vorozhtsov, Alexander B.
Source: Nanomaterials. 2023. Vol. 13, № 10. P. 1589 (1-12)
Type: статьи в журналах
Date: 2023
Description: This paper presents the results of studies on AlMgB14-based ceramic coatings deposited on WC-Co hard alloy substrates using RF plasma sputtering. The aim of this work is to study the structure, phase ... More
Add   Elastoplastic deformation of rotating disk made of aluminum dispersion-hardened alloys
Authors: Matvienko, Oleg V. | Daneyko, Olga I. | Valikhov, Vladimir | Platov, Vladimir V. | Zhukov, Ilya A. | Vorozhtsov, Alexander B.
Source: Metals. 2023. Vol. 13, № 6. P. 1028 (1-23)
Type: статьи в журналах
Date: 2023
Description: This paper studies the plastic deformation of a rotating disk made of aluminum dispersion-hardened alloys using mechanical tensile tests and a structured study using optical microscopy methods. Alloys ... More
Add   Structure and flexural strength of the hot-pressed AlMgB14 ceramic
Authors: Tkachev, Dmitriy | Nikitin, Pavel Yu. | Zhukov, Ilya A. | Vorozhtsov, Alexander B. | Marchenko, Ekaterina S. | Verkhoshanskiy, Yanis | Belchikov, Ivan
Source: Physica scripta. 2023. Vol. 98, № 2. P. 025703
Type: статьи в журналах
Date: 2023
Description: AlMgB14 materials were obtained by hot-pressing of the prereacted AlMgB14 powder. The phase composition, structure, hardness and flexural strength have been studied. The XRD studies shown that the pha ... More
Add   Mathematical model of propagation of an aerosol created by an impulse method in space
Authors: Kudryashova, Olga B. | Sokolov, Sergei D. | Vorozhtsov, Alexander B.
Source: Materials. 2023. Vol. 16, № 16. P. 5701 (1-11)
Type: статьи в журналах
Date: 2023
Description: When developing neutralization systems for harmful agents, it is necessary to understand the mechanisms of the formation and evolution of an aerosol cloud in a closed or open space. Effective decontam ... More
Add   Microstructure and biodegradation performance of Mg–4Ca–1Zn based alloys after ultrasonic treatment and doping with nanodiamonds for biomedical applications
Authors: Marchenko, Ekaterina S. | Baigonakova, Gulsharat A. | Khrustalev, Anton P. | Zhukov, Ilya A. | Vorozhtsov, Alexander B. | Chekalkin, Timofey L. | Monogenov, Alexander N. | Garin, Alexander S. | Kim, Tae-Woo | Kang, Seung-Baik
Source: Materials Chemistry and Physics. 2023. Vol. 295. P. 126959 (1-9)
Type: статьи в журналах
Date: 2023
Description: This work aims to study microstructural features, phase composition, topology, surface potential, and the biodegradation performance of Mg–4Zn–1Ca-based alloys whose melts were ultrasonically (US) tre ... More
Add   Advanced fitting method for the kinetic analysis of thermogravimetric data
Authors: Bondarchuk, Ivan S. | Bondarchuk, Sergey S. | Vorozhtsov, Alexander B. | Zhukov, Alexander S.
Source: Molecules. 2023. Vol. 28, № 1. P. 424 (1-14)
Type: статьи в журналах
Date: 2023
Description: The article considered the solution of the inverse problem of chemical kinetics of the analysis of experimental data of a thermogravimetric experiment at a constant sample heating rate. The fitting me ... More
Add   Effects of sintering temperature on the microstructure and properties of a W-Cu pseudo-alloy
Authors: Lebedev, Mikhail | Promakhov, Vladimir V. | Schulz, Nikita | Vorozhtsov, Alexander B. | Lerner, Marat I.
Source: Metals. 2023. Vol. 13, № 10. P. 1741 (1-15)
Type: статьи в журналах
Date: 2023
Description: This paper studies the feasibility of fabricating pseudo-alloys based on a W-Cu system through vacuum sintering of spherical bimetallic particles synthesized using the electric explosion of copper–tun ... More
Add   Study of the phase composition, structure and mechanical properties of synthetic composites produced by high-temperature vacuum sintering of SHS-fabricated CrNi-TiN powders
Authors: Matveev, Alexey E. | Promakhov, Vladimir V. | Schulz, Nikita | Bakhmat, Vladislav | Babaev, Artem | Vorozhtsov, Alexander B.
Source: Metals. 2023. Vol. 13, № 5. P. 846 (1-14)
Type: статьи в журналах
Date: 2023
Description: This work studies the phase composition, structure and mechanical properties of composite materials obtained by high-temperature vacuum sintering of SHS-fabricated CrNi–TiN powders synthesized in semi ... More
Add   Structure, cytocompatibility and biodegradation of nanocrystalline coated Mg–Ca–Zn alloys
Authors: Baigonakova, Gulsharat A. | Marchenko, Ekaterina S. | Zhukov, Ilya S. | Vorozhtsov, Alexander B.
Source: Vacuum. 2023. Vol. 207. P. 111630 (1-8)
Type: статьи в журналах
Date: 2023
Description: The study addresses the control of the biodegradation rate of the magnesium–zinc–calcium (Mg–Ca–Zn) alloy, and improvement of its biocorrosion resistance and cytocompatibility using titanium nitride ( ... More
  • «
  • ←
  • 1
  • →
  • »
^