Электронная библиотека (репозиторий) Томского государственного университета
Platov, Vladimir V.

Add to Quick Collection   All 7 Results

Showing items 1 - 7 of 7.
  • «
  • ←
  • 1
  • →
  • »
Sort:
 Add All Items to Quick Collection
Add   Elastoplastic deformation of rotating disk made of aluminum dispersion-hardened alloys
Authors: Matvienko, Oleg V. | Daneyko, Olga I. | Valikhov, Vladimir | Platov, Vladimir V. | Zhukov, Ilya A. | Vorozhtsov, Alexander B.
Source: Metals. 2023. Vol. 13, № 6. P. 1028 (1-23)
Type: статьи в журналах
Date: 2023
Description: This paper studies the plastic deformation of a rotating disk made of aluminum dispersion-hardened alloys using mechanical tensile tests and a structured study using optical microscopy methods. Alloys ... More
Add   Influence of tungsten nanoparticles on microstructure and mechanical properties of an Al-5%Mg alloy produced by casting
Authors: Khrustalyov, Anton P. | Kakhidze, Nikolai I. | Platov, Vladimir V. | Zhukov, Ilya A. | Vorozhtsov, Alexander B.
Source: Metals. 2022. Vol. 12, № 6. P. 989 (1-11)
Type: статьи в журналах
Date: 2022
Description: This paper investigates the impact of tungsten nanoparticles on the microstructure and mechanical properties of the Al-5Mg alloy. Tungsten concentrations of up to 0.5 wt.% led to a slight modification ... More
Add   Evaluation of the possibility of obtaining welded joints of plates from Al-Mg-Mn aluminum alloys, strengthened by the introduction of TiB2 particles
Authors: Zhukov, Ilya A. | Kozulin, Alexander A. | Khrustalyov, Anton P. | Tkachev, Dmitrii | Platov, Vladimir V. | Nikitin, Pavel Yu. | Vorozhtsov, Alexander B.
Source: Metals. 2021. Vol. 11, № 10. P. 1564 (1-12)
Type: статьи в журналах
Date: 2021
Description: In the work, the possibility of obtaining strong welded joints of aluminum alloys modified with particles is demonstrated. For research, strengthened aluminum alloys of the Al-Mg-Mn system with the in ... More
Add   The effect of Al3Er particles on the structure and mechanical properties of an Al-Mg alloy
Authors: Khrustalev, Anton P. | Zhukov, Ilya A. | Platov, Vladimir V. | Vorozhtsov, Alexander B.
Source: Light metals 2021. Cham, 2021. P. 227-231
Type: статьи в сборниках
Date: 2021
Description: The work presents a study on alloys of the Al-Mg system (5–6 wt%) strengthened with Al3Er particles. The introduction of Al3Er particles into the Al-Mg melt was carried out using master alloys, a mech ... More
Add   Influence of vibration treatment and modification of A356 aluminum alloy on its structure and mechanical properties
Authors: Khmeleva, Marina G. | Zhukov, Ilya A. | Platov, Vladimir V. | Khrustalyov, Anton P. | Vorozhtsov, Alexander B. | Promakhov, Vladimir V.
Source: Metals. 2019. Vol. 9, № 1. P. 87 (1-9)
Type: статьи в журналах
Date: 2019
Description: A series of casting experiments was conducted with A356 aluminum alloys by applying vibration treatment and using Al-TiB2 composite master alloys. The main vibration effects include the promotion of n ... More
Add   The impact of particle reinforcement with Al2O3, TiB2, and TiC and severe plastic deformation treatment on the combination of strength and electrical conductivity of pure aluminum
Authors: Kozulin, Alexander A. | Khrustalyov, Anton P. | Matveev, Alexey E. | Platov, Vladimir V. | Vorozhtsov, Alexander B. | Zhukova, Tatyana V. | Promakhov, Vladimir V. | Zhukov, Ilya A.
Source: Metals. 2019. Vol. 9, № 1. P. 65 (1-10)
Type: статьи в журналах
Date: 2019
Description: It has been found that a high electrical conductivity of 63.1%, the International Annealed Copper Standard (IACS), and high mechanical properties are achieved by the initial aluminum alloy after under ... More
Add   Principles of structure and phase composition formation in composite master alloys of the Al-Ti-B/B4C systems used for aluminum alloy modification
Authors: Promakhov, Vladimir V. | Matveev, Alexey E. | Platov, Vladimir V. | Khrustalev, Anton P. | Dubkova, Yana A. | Vorozhtsov, Sergey A. | Potekaev, Aleksandr I. | Zhukov, Ilya A.
Source: Russian physics journal. 2018. Vol. 60, № 11. P. 2025-2031
Type: статьи в журналах
Date: 2018
Description: The principles of formation of structure and properties of materials produced by self-propagating hightemperature synthesis (SHS) from the Al–Ti–B/B4C powder systems are identified. It is shown that t ... More
  • «
  • ←
  • 1
  • →
  • »
^