Add to Quick Collection
All 39 Results
Showing items 1 - 15 of 39.
Add All Items to Quick Collection
Authors:
Marchenko, Ekaterina S. |
Baigonakova, Gulsharat A. |
Khrustalev, Anton P. |
Zhukov, Ilya A. |
Vorozhtsov, Alexander B. |
Chekalkin, Timofey L. |
Monogenov, Alexander N. |
Garin, Alexander S. |
Kim, Tae-Woo |
Kang, Seung-Baik
Source: Materials Chemistry and Physics. 2023. Vol. 295. P. 126959 (1-9)
Type: статьи в журналах
Date: 2023
Description:
This work aims to study microstructural features, phase composition, topology, surface potential, and the biodegradation performance of Mg–4Zn–1Ca-based alloys whose melts were ultrasonically (US) tre
... More
Source: Cancer treatment and research communications. 2023. Vol. 34. P. 100681 (1-4)
Type: статьи в журналах
Date: 2023
Description:
We describe a case of a woman with invasive IB2 cervical cancer who desired to maintain fertility and required complex treatment. The suggested surgical approach with uterine transposition improves th
... More
Source: Physica scripta. 2023. Vol. 98, № 2. P. 025703
Type: статьи в журналах
Date: 2023
Description:
AlMgB14 materials were obtained by hot-pressing of the prereacted AlMgB14 powder. The phase composition, structure, hardness and flexural strength have been studied. The XRD studies shown that the pha
... More
Source: Vacuum. 2023. Vol. 207. P. 111630 (1-8)
Type: статьи в журналах
Date: 2023
Description:
The study addresses the control of the biodegradation rate of the magnesium–zinc–calcium (Mg–Ca–Zn) alloy, and improvement of its biocorrosion resistance and cytocompatibility using titanium nitride (
... More
Source: Journal of materials engineering and performance. 2023. Vol. 32, № 21. P. 9665-9670
Type: статьи в журналах
Date: 2023
Description:
The effect of stress-induced martensite aging on the microstructure, viscoelastic properties, and one-way and two-way shape memory effect in high-temperature Ni50.2Ti37.3Hf12.5 aged polycrystals in te
... More
Source: Metals. 2022. Vol. 12, № 10. P. 1603 (1-15)
Type: статьи в журналах
Date: 2022
Description:
This work aims to study the cytocompatibility of protective coatings obtained in argon and nitrogen atmospheres on a TiNi surface. Particular attention is paid to comparing the interaction of cell cul
... More
Source: Polymers. 2022. Vol. 14, № 23. P. 5177 (1-11)
Type: статьи в журналах
Date: 2022
Description:
Multi-structural polymer composites are widely used in the mechanical engineering, automotive, aviation and oil refining industries, as well as in the printing industry as a shockabsorbing deckle on t
... More
Source: Materials. 2022. Vol. 15, № 23. P. 8450 (1-28)
Type: статьи в журналах
Date: 2022
Description:
It is known that the presence of oxygen phases in hard materials leads to an undesirable decrease in the mechanical properties. In materials based on AlMgB14, the main oxygen impurity is spinel MgAl2O
... More
Source: International conference on shape memory and superelastic technologies (SMST 2022) : 60 Years of Nitinol : Carlsbad, California, USA, 16-20 May 2022. [S. l.], 2022. P. 73-74
Type: статьи в сборниках
Date: 2022
Description:
TiNi-based alloys belong to the class of materials with shape memory effects and superelasticity, which are currently being actively studied and successfully used in engineering and medicine. In these
... More
Source: Journal of alloys and compounds. 2022. Vol. 918. P. 165617 (1-12)
Type: статьи в журналах
Date: 2022
Description:
Aluminum alloying effects (up to 2 at %) on the macrostructure, microstructure, and mechanical properties of porous nitinol (NiTi) obtained by self-propagating high-temperature synthesis (SHS) were st
... More
Source: Metals. 2022. Vol. 12, № 7. P. 1131 (1-11)
Type: статьи в журналах
Date: 2022
Description:
The present article is aimed at studying the deformation behavior of TiNi wire and knitted metal TiNi mesh under uniaxial tension and revealing the role of wire geometry on their main mechanical chara
... More
Source: Materials letters. 2022. Vol. 324. P. 132817 (1-4)
Type: статьи в журналах
Date: 2022
Description:
The shape memory effect (SME) and superelasticity (SE) after marforming (deformation in the martensitic phase at 203 K, followed by annealing at 713 K, 0.5 h) were studied in the equiatomic TiNi cryst
... More
Source: Surface and coatings technology. 2022. Vol. 436. P. 128291 (1-12)
Type: статьи в журналах
Date: 2022
Description:
In the study, gradient coatings with a nanometer thickness were successfully synthesized from Ti/Ni/Ti nanolaminates on the TiNi substrate in a nitrogen atmosphere at 900 °C. A technique for producing
... More
Authors:
Tang, Shunlong |
Zhou, Meng |
Li, Xu |
Zhang, Yi |
Xu, Deye |
Zhang, Zhiyang |
Tian, Baohong |
Jia, Yanlin |
Liu, Yong |
Volinsky, Alex A. |
Marchenko, Ekaterina S.
Source: Materials today communications. 2022. Vol. 31. P. 103771 (1-13)
Type: статьи в журналах
Date: 2022
Description:
The Cu-1Ni-0.9Sn-0.5Ti-0.3Cr alloy was prepared by vacuum induction melting. The hot deformation experiments with the alloy were carried out using the Gleeble-1500 deformation simulation device at 0.0
... More
Source: Materials. 2022. Vol. 15, № 23. P. 8359 (1-15)
Type: статьи в журналах
Date: 2022
Description:
The phase composition, microstructure, and multiple shape memory effect of TiNi50−xVx alloys were studied in this work. The phase composition of the TiNi50−xVx system is the TiNi matrix, spherical par
... More
