Add to Quick Collection
All 81 Results
Showing items 1 - 15 of 81.
Add All Items to Quick Collection
Source: Materials. 2022. Vol. 15, № 23. P. 8450 (1-28)
Type: статьи в журналах
Date: 2022
Description:
It is known that the presence of oxygen phases in hard materials leads to an undesirable decrease in the mechanical properties. In materials based on AlMgB14, the main oxygen impurity is spinel MgAl2O
... More
Source: Metals. 2019. Vol. 9, № 1. P. 65 (1-10)
Type: статьи в журналах
Date: 2019
Description:
It has been found that a high electrical conductivity of 63.1%, the International Annealed Copper Standard (IACS), and high mechanical properties are achieved by the initial aluminum alloy after under
... More
Source: Materials. 2022. Vol. 15, № 15. P. 5327 (1-12)
Type: статьи в журналах
Date: 2022
Description:
This article considers issues pertinent to the research of the phase composition, structure and mechanical properties of materials obtained from powders of composite (Ni-Ti)-TiB2, which have prospecti
... More
Source: Metals. 2023. Vol. 13, № 3. P. 477 (1-9)
Type: статьи в журналах
Date: 2023
Description:
The Hugoniot elastic limit and spall strength were measured for a heat-resistant metalmatrix composite Inconel 625–5%NiTi–TiB2 alloy additive manufactured (AM) by direct laser deposition. The strength
... More
Source: Metals. 2022. Vol. 12, № 2. P. 277 (1-13)
Type: статьи в журналах
Date: 2022
Description:
In this work, magnesium-based composites were obtained by shock-wave compaction of a powder mixture of Mg-5 wt.% AlN at a shock-wave pressure of 2 GPa. Their microstructure was investigated and the ph
... More
Source: Metals. 2022. Vol. 12, № 3. P. 525 (1-10)
Type: статьи в журналах
Date: 2022
Description:
This research work studies the structural phase parameters and physicomechanical properties of metal-matrix composite materials based on a Ni–TiB2 system obtained by additive manufacturing (specifical
... More
Source: Nanomaterials. 2022. Vol. 12, № 21. P. 3805 (1-9)
Type: статьи в журналах
Date: 2022
Description:
In this work, the structure, phase composition, hardness and tensile strength of the AlMgB14-based material obtained by spark plasma sintering (SPS) were investigated. According to the XRD results, th
... More
Source: Nanomaterials. 2023. Vol. 13, № 10. P. 1589 (1-12)
Type: статьи в журналах
Date: 2023
Description:
This paper presents the results of studies on AlMgB14-based ceramic coatings deposited on WC-Co hard alloy substrates using RF plasma sputtering. The aim of this work is to study the structure, phase
... More
Source: Nanomaterials. 2022. Vol. 12, № 11. P. 1895 (1-10)
Type: статьи в журналах
Date: 2022
Description:
In this work, composite materials were obtained by spark plasma sintering of an Al12Mg17-B-Si powder mixture. The structure, phase composition, and mechanical properties of the obtained composites wer
... More
Source: Metals. 2022. Vol. 12, № 6. P. 989 (1-11)
Type: статьи в журналах
Date: 2022
Description:
This paper investigates the impact of tungsten nanoparticles on the microstructure and mechanical properties of the Al-5Mg alloy. Tungsten concentrations of up to 0.5 wt.% led to a slight modification
... More
Source: Materials. 2022. Vol. 15, № 19. P. 6861 (1-15)
Type: статьи в журналах
Date: 2022
Description:
This paper studies the impact of the mass fraction of NiTi–TiB2 particles obtained by the method of self-propagating high-temperature synthesis (SHS) on the phase composition, structure, and mechanica
... More
Source: Metals. 2023. Vol. 13, № 6. P. 1028 (1-23)
Type: статьи в журналах
Date: 2023
Description:
This paper studies the plastic deformation of a rotating disk made of aluminum dispersion-hardened alloys using mechanical tensile tests and a structured study using optical microscopy methods. Alloys
... More
Source: Metals. 2021. Vol. 11, № 10. P. 1564 (1-12)
Type: статьи в журналах
Date: 2021
Description:
In the work, the possibility of obtaining strong welded joints of aluminum alloys modified with particles is demonstrated. For research, strengthened aluminum alloys of the Al-Mg-Mn system with the in
... More
Source: Materials today communications. 2020. Vol. 22. P. 100848 (1-7)
Type: статьи в журналах
Date: 2020
Description:
In this work, AlMgB14-based materials were obtained from powders of the intermetallic compound Al12Mg17 and boron using hot pressing method and mechanical treatment with a planetary mill. The method f
... More
Source: Physica scripta. 2023. Vol. 98, № 2. P. 025703
Type: статьи в журналах
Date: 2023
Description:
AlMgB14 materials were obtained by hot-pressing of the prereacted AlMgB14 powder. The phase composition, structure, hardness and flexural strength have been studied. The XRD studies shown that the pha
... More
