Add to Quick Collection
All 179 Results
Showing items 1 - 15 of 179.
Add All Items to Quick Collection
Source: Известия высших учебных заведений. Физика. 2024. Т. 67, № 1. С. 55-62
Type: статьи в журналах
Date: 2024
Description:
Представлены микроструктура, фазовый состав и твердость эквимолярного высокоэнтропийного и многокомпонентных сплавов Nb–Ni–Ti–Zr–Co, синтезированных методом дуговой плавки. Микроструктуру и фазовый со
... More
Authors:
Timofeeva, Ekaterina E. |
Panchenko, Elena Yu. |
Eftifeeva, Anna S. |
Tagiltsev, Anton I. |
Surikov, Nikita Yu. |
Tokhmetova, Aida B. |
Yanushonite, Eleonora I. |
Zherdeva, M. V. |
Karaman, Ibrahim |
Chumlyakov, Yuri I.
Source: Acta metallurgica Sinica (English letters). 2023. Vol. 36, № 4. P. 650-660
Type: статьи в журналах
Date: 2023
Description:
The study of the influence of the cobalt content on the cyclic stability of superelasticity (SE) was carried out in quenched Ni44Fe19Ga27Co10 and Ni39Fe19Ga27Co15 (at.%) single crystals under compress
... More
Source: Russian physics journal. 2023. Vol. 66, № 4. P. 398-403
Type: статьи в журналах
Date: 2023
Description:
The features of the microstructure of the high-nitrogen austenitic VNS-53-Sh steel after multidirectional isothermal forging have been studied by transmission electron microscopy. The formation of an
... More
Source: Metals. 2023. Vol. 13, № 10. P. 1741 (1-15)
Type: статьи в журналах
Date: 2023
Description:
This paper studies the feasibility of fabricating pseudo-alloys based on a W-Cu system through vacuum sintering of spherical bimetallic particles synthesized using the electric explosion of copper–tun
... More
Authors:
Tang, Shunlong |
Zhou, Meng |
Zhang, Yi |
Xu, Deye |
Zhang, Zhiyang |
Zheng, Xianhua |
Li, De |
Li, Xu |
Tian, Baohong |
Jia, Yanlin |
Liu, Yong |
Volinsky, Alex A. |
Marchenko, Ekaterina S.
Source: Materials science and engineering A. 2023. Vol. 871. P. 144910 (1-16)
Type: статьи в журналах
Date: 2023
Description:
In this paper, new Cu–Ni–Sn–Ti–Cr and Cu–Ni–Sn–Ti–Cr–Ce alloys were prepared and studied. After solution treatment and 60% cold rolling, the Cu–Ni–Sn–Ti–Cr alloy with micro-hardness of 221 HV, a tensi
... More
Authors:
Legostaeva, Elena V. |
Eroshenko, Anna Yu. |
Vavilov, Vladimir P. |
Skripnyak, Vladimir A. |
Luginin, Nikita |
Chulkov, Arsenii O. |
Kozulin, Alexander A. |
Skripnyak, Vladimir V. |
Schmidt, Juergen |
Tolmachev, Alexey I. |
Uvarkin, Pavel V. |
Sharkeev, Yuriy P.
Source: Metals. 2023. Vol. 13, № 5. P. 988 (1-17)
Type: статьи в журналах
Date: 2023
Description:
The microstructural investigation, mechanical properties, and accumulation and dissipation of energies of the magnesium alloy Mg-2.9Y-1.3Nd in the recrystallized state and after severe plastic deforma
... More
Source: Russian physics journal. 2023. Vol. 66, № 3. P. 341-349
Type: статьи в журналах
Date: 2023
Description:
Metal additive manufacturing is one of the new industrial technologies for fast prototyping of the metalcomponents with a complex internal architecture, gradient composition, or functionally gradient
... More
Source: Materials and manufacturing processes. 2023. Vol. 38, № 6. P. 659-667
Type: статьи в журналах
Date: 2023
Description:
Porous NiTi alloys were obtained by self-propagating high-temperature synthesis (SHS) using layer-bylayer combustion in closed and open gas flow reactors under a protective argon atmosphere. The maxim
... More
Source: Известия высших учебных заведений. Физика. 2023. Т. 66, № 12. С. 69-78
Type: статьи в журналах
Date: 2023
Description:
Приведены данные о микроструктуре, фазовом составе и микротвердости образцов сплавов TiNi в виде плоских вертикальных «стенок» высотой 110 мм, изготовленных методом двухпроволочного электронно-лучевог
... More
Source: Технологии безопасности жизнедеятельности. 2023. № 4. С. 43-53
Type: статьи в журналах
Date: 2023
Description:
В работе представлены результаты исследования аддитивного получения образцов на основе материала ZrO2 методом стереолитографической 3D-печати (DLP). Изучены параметры полимеризации суспензий с содержа
... More
Source: Metals. 2022. Vol. 12, № 7. P. 1140 (1-19)
Type: статьи в журналах
Date: 2022
Description:
The objective of this study was to improve the corrosion resistance of an A535 alloy by removing intermetallics on the alloy surface by alkaline etching to improve the morphologies and properties of t
... More
Source: Materials. 2022. Vol. 15, № 23. P. 8480 (1-17)
Type: статьи в журналах
Date: 2022
Description:
A comprehensive study was performed of the deformation and temperature behavior during quasi-static tension, as well as the peculiarities of accumulation and dissipation of energy during plastic defor
... More
Authors:
Sharkeev, Yuriy P. |
Eroshenko, Anna Yu. |
Legostaeva, Elena V. |
Kovalevskaya, Zhanna G. |
Belyavskaya, Olga A. |
Khimich, Margarita A. |
Epple, Matthias |
Prymak, Oleg |
Sokolova, Viktoriya |
Zhu, Qifang |
Sun, Zeming |
Zhang, Hongju
Source: Metals. 2022. Vol. 12, № 7. P. 1136 (1-30)
Type: статьи в журналах
Date: 2022
Description:
For this paper, studies of the microstructure as well as the mechanical and biological properties of bioinert titanium, zirconium, and niobium alloys in their nanostructured (NS) and ultrafine-grained
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020136-1-020136-4
Type: статьи в журналах
Date: 2022
Description:
The samples of the promising Cu-Al-Ni alloys were fabricated by electron-beam additive printing and studied by electron microscopy. The fabrication was carried out using the combined powder feed and w
... More
Source: Journal of alloys and compounds. 2022. Vol. 918. P. 165617 (1-12)
Type: статьи в журналах
Date: 2022
Description:
Aluminum alloying effects (up to 2 at %) on the macrostructure, microstructure, and mechanical properties of porous nitinol (NiTi) obtained by self-propagating high-temperature synthesis (SHS) were st
... More