Add to Quick Collection
All 18 Results
Showing items 1 - 15 of 18.
Add All Items to Quick Collection
Source: Metals. 2022. Vol. 12, № 11. P. 1797 (1-26)
Type: статьи в журналах
Date: 2022
Description:
The paper presents the results of the evaluation of the mechanical characteristics of samples of multi-metal “copper-steel” structures fabricated by additive double wire electron beam method. The glob
... More
Source: Wear. 2022. Vol. 488-489. P. 204126 (1-14)
Type: статьи в журналах
Date: 2022
Description:
Severe deformation of Hadfield steel occurs via different deformation mechanisms (slip or twinning) depending on the crystallographic orientation and direction of the applied load. The development of
... More
Authors:
Polekhina, Nadezhda A. |
Linnik, V. V. |
Almaeva, Kseniya V. |
Litovchenko, Igor Yu. |
Tyumentsev, Alexander N. |
Moskvichev, Evgeny N. |
Chernov, Vyacheslav M. |
Leontyeva-Smirnova, M. V. |
Degtyarev, N. A. |
Moroz, K. A.
Source: Russian physics journal. 2022. Vol. 64, № 12. P. 2225-2231
Type: статьи в журналах
Date: 2022
Description:
The effect of high-temperature thermomechanical treatment (HTMT) with deformation in the austenitic region on the regularities of low-temperature embrittlement of low-activation 12% chromium ferritic-
... More
Source: Metals. 2022. Vol. 12, № 1. P. 63 (1-16)
Type: статьи в журналах
Date: 2022
Description:
The deformation microstructures formed by novel multistage high-temperature thermomechanical treatment (HTMT) and their effect on the mechanical properties of austenitic reactor steel are investigated
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020136-1-020136-4
Type: статьи в журналах
Date: 2022
Description:
The samples of the promising Cu-Al-Ni alloys were fabricated by electron-beam additive printing and studied by electron microscopy. The fabrication was carried out using the combined powder feed and w
... More
Authors:
Yudin, Nikolay N. |
Antipov, Oleg L. |
Gribeniukov, Alexander I. |
Dyomin, Victor V. |
Zinoviev, Mikhail M. |
Podzyvalov, Sergey N. |
Slyunko, Elena S. |
Zhuravleva, E. V. |
Pfeif, A. A. |
Yudin, Nikolay A. |
Kulesh, M. M. |
Moskvichev, Evgeny N.
Source: Russian physics journal. 2022. Vol. 64, № 11. P. 2096-2101
Type: статьи в журналах
Date: 2022
Description:
The laser induced damage thresholds of ZnGeP2 single crystals are determined. The values of the thresholds under the action of laser radiation at a wavelength of 2,097 μm, pulse repetition frequency o
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020049-1-020049-4
Type: статьи в журналах
Date: 2022
Authors:
Savchenko, Nikolai L. |
Sevostyanova, Irina |
Grigoriev, Mikhail |
Sablina, Tatiana |
Buyakov, Ales S. |
Rudmin, Maxim |
Vorontsov, Andrey |
Moskvichev, Evgeny N. |
Rubtsov, Valery E. |
Tarasov, Sergey Yu.
Source: Lubricants. 2022. Vol. 10, № 7. P. 140 (1-27)
Type: статьи в журналах
Date: 2022
Description:
WC/Y-TZP-Al2O3 hybrid ceramic-matrix composites (CMCs) with dispersed Hadfield steel particles were sintered and then tested at sliding speeds in the range of 7-37 m/s and contact pressure 5 MPa. Fast
... More
Authors:
Polekhina, Nadezhda A. |
Litovchenko, Igor Yu. |
Almaeva, Kseniya V. |
Akkuzin, Sergey A. |
Linnik, Valeria V. |
Moskvichev, Evgeny N. |
Chernov, Vyacheslav M. |
Naumenko, I. A. |
Saifutdinova, M. S. |
Leontyeva-Smirnova, M. V.
Source: Journal of nuclear materials. 2022. Vol. 572. P. 154039 (1-12)
Type: статьи в журналах
Date: 2022
Description:
The microstructure, the phase and elemental compositions of the surface and near-surface layers of the EP-823-Sh reactor 12 % chromium ferritic-martensitic steel after holding in an oxygen-containing
... More
Source: Metals. 2022. Vol. 12, № 12. P. 2106 (1-15)
Type: статьи в журналах
Date: 2022
Description:
Using X-ray diffraction, scanning and transmission electron microscopy, the microstructure of a new low-activation chromium-manganese austenitic steel with a high content of manganese and strong carbi
... More
Authors:
Polekhina, Nadezhda A. |
Linnik, Valeria V. |
Litovchenko, Igor Yu. |
Almaeva, Kseniya V. |
Akkuzin, Sergey A. |
Moskvichev, Evgeny N. |
Chernov, Vyacheslav M. |
Leontyeva-Smirnova, Mariya V. |
Degtyarev, Nikolay A. |
Moroz, Kirill A.
Source: Metals. 2022. Vol. 12, № 11. P. 1928 (1-20)
Type: статьи в журналах
Date: 2022
Description:
In this work, we study the effect of high-temperature thermomechanical treatment (HTMT) with deformation in the austenite region on the microstructure, tensile properties, impact toughness, and fractu
... More
Source: Additive manufacturing. 2021. Vol. 48, p. A. P. 102415 (1-11)
Type: статьи в журналах
Date: 2021
Description:
The grain shape and texture effects in aluminum alloys manufactured by selective laser melting are studied numerically in terms of micromechanical simulations. The method of step-by-step packing is ad
... More
Source: Physical Mesomechanics. 2021. Vol. 24, № 5. P. 570-577
Type: статьи в журналах
Date: 2021
Description:
This paper experimentally investigates the process of deformation-induced mesoscopic surface roughening in commercially pure aluminum under uniaxial tension. Surface profiles are recorded in selected
... More
Authors:
Khoroshko, E. S. |
Filippov, Andrey V. |
Shamarin, N. N. |
Moskvichev, Evgeny N. |
Utyaganova, V. R. |
Tarasov, Sergey Yu. |
Savchenko, Nikolai L. |
Kolubaev, Evgeniy A. |
Rubtsov, V. E. |
Lychagin, Dmitry V.
Source: Russian physics journal. 2021. Vol. 64, № 2. P. 333-339
Type: статьи в журналах
Date: 2021
Source: Light metals 2020. Cham, 2020. P. 465-470
Type: статьи в сборниках
Date: 2020
Description:
The paper presents a study on the effect of adding a small amount of particles to a technically pure aluminum alloy on its structure and mechanical properties. For this purpose laboratory castings of
... More