Электронная библиотека (репозиторий) Томского государственного университета
механические свойства | Vorozhtsov, Alexander B.

Add to Quick Collection   All 10 Results

Showing items 1 - 10 of 10.
  • «
  • ←
  • 1
  • →
  • »
Sort:
 Add All Items to Quick Collection
Add   Influence of tungsten nanoparticles on microstructure and mechanical properties of an Al-5%Mg alloy produced by casting
Authors: Khrustalyov, Anton P. | Kakhidze, Nikolai I. | Platov, Vladimir V. | Zhukov, Ilya A. | Vorozhtsov, Alexander B.
Source: Metals. 2022. Vol. 12, № 6. P. 989 (1-11)
Type: статьи в журналах
Date: 2022
Description: This paper investigates the impact of tungsten nanoparticles on the microstructure and mechanical properties of the Al-5Mg alloy. Tungsten concentrations of up to 0.5 wt.% led to a slight modification ... More
Add   Effect of Al3Er particles on the structure, mechanical properties, and fracture of AA5056 alloy after casting and deformation treatment
Authors: Khrustalyov, Anton P. | Kozulin, Alexander A. | Zhukov, Ilya A. | Nikitin, Pavel Yu. | Sachkov, Victor Ivanovich | Vorozhtsov, Alexander B.
Source: JOM. 2021. Vol. 73, № 12. P. 3858-3865
Type: статьи в журналах
Date: 2021
Description: The structure of the AA5056-Al3Er composite and the initial alloy was studied by optical and scanning electron microscopy. The introduction of 0.23 wt.% particles does not modify the structure of the ... More
Add   Researching the properties of samples fabricated using selective laser melting from a high‐temperature nickel‐based alloy
Authors: Mazalov, Alexey | Shmatov, Dmitry | Zelenina, Lydia | Platko, Dmitry | Promakhov, Vladimir V. | Vorozhtsov, Alexander B. | Schulz, Nikita
Source: Applied sciences. 2021. Vol. 11, № 4. P. 1419 (1-10)
Type: статьи в журналах
Date: 2021
Description: A possible application of a metal powder composition made of a high‐temperature nickelbased alloy with high heat strength (the material is analogous to Inconel 718) in selective laser melting (SLM, an ... More
Add   Synthesis of metal matrix composites based on CrxNiy-TiN for additive technology
Authors: Matveev, Alexey E. | Promakhov, Vladimir V. | Schultz, Nikita | Vorozhtsov, Alexander B.
Source: Materials. 2021. Vol. 14, № 20. P. 5914 (1-11)
Type: статьи в журналах
Date: 2021
Description: The novelty of this work consists of obtaining original fundamental data on the laws of synthesis of new metal matrix composite materials for additive technologies. CrN + TiNi composites were obtained ... More
Add   The effect of Al3Er particles on the structure and mechanical properties of an Al-Mg alloy
Authors: Khrustalev, Anton P. | Zhukov, Ilya A. | Platov, Vladimir V. | Vorozhtsov, Alexander B.
Source: Light metals 2021. Cham, 2021. P. 227-231
Type: статьи в сборниках
Date: 2021
Description: The work presents a study on alloys of the Al-Mg system (5–6 wt%) strengthened with Al3Er particles. The introduction of Al3Er particles into the Al-Mg melt was carried out using master alloys, a mech ... More
Add   Impact of dispersion hardening by alumina nano particles on mechanical properties of Al 1100
Authors: Kozulin, Alexander A. | Khrustalyov, Anton P. | Moskvichev, Evgeny N. | Vorozhtsov, Alexander B. | Lychagin, Dmitry V. | Zhukov, Ilya A.
Source: Light metals 2020. Cham, 2020. P. 465-470
Type: статьи в сборниках
Date: 2020
Description: The paper presents a study on the effect of adding a small amount of particles to a technically pure aluminum alloy on its structure and mechanical properties. For this purpose laboratory castings of ... More
Add   Physical and mechanical properties of CuW20 composites synthesized by explosive compaction of bimetallic nanoparticles
Authors: Pervikov, Alexander V. | Chumaevskii, Andrey V. | Suliz, K. V. | Vorozhtsov, Alexander B. | Lerner, Marat I. | Khrustalyov, Anton P.
Source: Russian physics journal. 2020. Vol. 62, № 10. P. 1822-1830
Type: статьи в журналах
Date: 2020
Description: The paper considers the physical and mechanical properties of bimetallic tungsten-copper powders after explosive compaction. This method is used to produce rather dense powder compacts from tungsten-c ... More
Add   Influence of vibration treatment and modification of A356 aluminum alloy on its structure and mechanical properties
Authors: Khmeleva, Marina G. | Zhukov, Ilya A. | Platov, Vladimir V. | Khrustalyov, Anton P. | Vorozhtsov, Alexander B. | Promakhov, Vladimir V.
Source: Metals. 2019. Vol. 9, № 1. P. 87 (1-9)
Type: статьи в журналах
Date: 2019
Description: A series of casting experiments was conducted with A356 aluminum alloys by applying vibration treatment and using Al-TiB2 composite master alloys. The main vibration effects include the promotion of n ... More
Add   The impact of particle reinforcement with Al2O3, TiB2, and TiC and severe plastic deformation treatment on the combination of strength and electrical conductivity of pure aluminum
Authors: Kozulin, Alexander A. | Khrustalyov, Anton P. | Matveev, Alexey E. | Platov, Vladimir V. | Vorozhtsov, Alexander B. | Zhukova, Tatyana V. | Promakhov, Vladimir V. | Zhukov, Ilya A.
Source: Metals. 2019. Vol. 9, № 1. P. 65 (1-10)
Type: статьи в журналах
Date: 2019
Description: It has been found that a high electrical conductivity of 63.1%, the International Annealed Copper Standard (IACS), and high mechanical properties are achieved by the initial aluminum alloy after under ... More
Add   Structure and mechanical properties of magnesium-based composites reinforced with nitride aluminum nanoparticles
Authors: Khrustalyov, Anton P. | Zhukov, Ilya A. | Promakhov, Vladimir V. | Dammer, Vladislav Kh. | Vorozhtsov, Alexander B. | Vorozhtsov, Sergey A.
Source: Russian physics journal. 2017. Vol. 59, № 12. P. 2183-2185
Type: статьи в журналах
Date: 2017
  • «
  • ←
  • 1
  • →
  • »

Creator

Date

Subject

Resource Type

^