Add to Quick Collection
All 303 Results
Showing items 16 - 30 of 303.
Add All Items to Quick Collection
Source: Russian physics journal. 2022. Vol. 65, № 3. P. 586-588
Type: статьи в журналах
Date: 2022
Source: Materials science and engineering A. 2022. Vol. 843. P. 143159 (1-37)
Type: статьи в журналах
Date: 2022
Description:
A comparative study of the effectiveness of carbide and oxide types of strengthening of V–Cr–Zr alloy was carried out by means of a comprehensive certification of structural-phase state parameters and
... More
Source: Journal of alloys and compounds. 2022. Vol. 909. P. 164761 (1-12)
Type: статьи в журналах
Date: 2022
Description:
Powder metallurgy Cu-30Fe alloy was prepared by mechanical alloying, pressureless sintering, and rolling processes. The alloy microstructure and physical properties affected by rolling were studied. T
... More
Source: Inorganic materials: applied research. 2022. Vol. 13, № 5. P. 1247-1260
Type: статьи в журналах
Date: 2022
Source: Behavior of materials under impact, explosion, high pressures and dynamic strain rates. Cham, 2022. P. 69-82
Type: статьи в сборниках
Date: 2022
Description:
This paper presents the results of research on superhard coatings obtained by the interaction of high-speed powder clouds with a titanium substrate. High-speed powder clouds were obtained under condit
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020011-1-020011-4
Type: статьи в журналах
Date: 2022
Description:
The effect of warm deformation on the microstructure and mechanical properties of cold-deformed AISI 316 type austenitic steel is investigated. It is shown that cold deformation with a strain degree o
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020129-1-020129-4
Type: статьи в журналах
Date: 2022
Description:
The work presents a study the mechanical properties of porous titanium nickelide and to study the evolution of deformation fields at the meso- and macroscopic level on the surface of porous titanium n
... More
Source: Defect and diffusion forum. 2022. Vol. 419. P. 103-108
Type: статьи в журналах
Date: 2022
Description:
Stress-strain behavior of austenitic stainless steel grade AISI 304 was investigated by means of uniaxial tensile tests and magneto-phase analysis. The test materials were strained in tension within t
... More
Authors:
Polekhina, Nadezhda A. |
Linnik, Valeria V. |
Litovchenko, Igor Yu. |
Almaeva, Kseniya V. |
Akkuzin, Sergey A. |
Moskvichev, Evgeny N. |
Chernov, Vyacheslav M. |
Leontyeva-Smirnova, Mariya V. |
Degtyarev, Nikolay A. |
Moroz, Kirill A.
Source: Metals. 2022. Vol. 12, № 11. P. 1928 (1-20)
Type: статьи в журналах
Date: 2022
Description:
In this work, we study the effect of high-temperature thermomechanical treatment (HTMT) with deformation in the austenite region on the microstructure, tensile properties, impact toughness, and fractu
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020179-1-020179-4
Type: статьи в журналах
Date: 2022
Description:
The results of studying the microstructure and mechanical properties of the V-W-Cr alloy after different regimes of thermomechanical treatment are presented. It is shown that the use of the modified r
... More
Source: Nanomaterials. 2022. Vol. 12, № 24. P. 4442 (1-11)
Type: статьи в журналах
Date: 2022
Description:
This paper studied the features of the martensitic transformations and mechanical properties of 40, 60, and 90 µm thick NiTi wires with nanocrystalline B2 structures. It was established that the wires
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020107-1-020107-4
Type: статьи в журналах
Date: 2022
Source: Физическая мезомеханика материалов. Физические принципы формирования многоуровневой структуры и механизмы нелинейного поведения : международная конференция, 5-8 сентября 2022 г., Томск, Россия : тезисы докладов. Новосибирск, 2022. С. 123
Type: статьи в сборниках
Date: 2022
Type: диссертации
Date: 2022
Source: Известия высших учебных заведений. Физика. 2022. Т. 65, № 7. С. 42-47
Type: статьи в журналах
Date: 2022
Description:
Проведены исследования влияния интенсивной пластической деформации и последующих дорекристаллизационных отжигов на структурно-фазовое состояние и механические свойства титанового сплава ВТ35. Показано
... More
