Add to Quick Collection
All 304 Results
Showing items 1 - 15 of 304.
Add All Items to Quick Collection
Source: Известия высших учебных заведений. Физика. 2024. Т. 67, № 5. С. 100-107
Type: статьи в журналах
Date: 2024
Description:
Изучены состав, структура и механические свойства покрытий Ti–Al–Ta–N, полученных методами сильноточного импульсного магнетронного распыления и магнетронного распыления при постоянном токе. Установлен
... More
Authors:
Tang, Shunlong |
Zhou, Meng |
Zhang, Yi |
Xu, Deye |
Zhang, Zhiyang |
Zheng, Xianhua |
Li, De |
Li, Xu |
Tian, Baohong |
Jia, Yanlin |
Liu, Yong |
Volinsky, Alex A. |
Marchenko, Ekaterina S.
Source: Materials science and engineering A. 2023. Vol. 871. P. 144910 (1-16)
Type: статьи в журналах
Date: 2023
Description:
In this paper, new Cu–Ni–Sn–Ti–Cr and Cu–Ni–Sn–Ti–Cr–Ce alloys were prepared and studied. After solution treatment and 60% cold rolling, the Cu–Ni–Sn–Ti–Cr alloy with micro-hardness of 221 HV, a tensi
... More
Authors:
Legostaeva, Elena V. |
Eroshenko, Anna Yu. |
Vavilov, Vladimir P. |
Skripnyak, Vladimir A. |
Luginin, Nikita |
Chulkov, Arsenii O. |
Kozulin, Alexander A. |
Skripnyak, Vladimir V. |
Schmidt, Juergen |
Tolmachev, Alexey I. |
Uvarkin, Pavel V. |
Sharkeev, Yuriy P.
Source: Metals. 2023. Vol. 13, № 5. P. 988 (1-17)
Type: статьи в журналах
Date: 2023
Description:
The microstructural investigation, mechanical properties, and accumulation and dissipation of energies of the magnesium alloy Mg-2.9Y-1.3Nd in the recrystallized state and after severe plastic deforma
... More
Source: Inorganic materials. 2023. Vol. 59, № 2. P. 123-133
Type: статьи в журналах
Date: 2023
Description:
We have studied characteristic structural features of PTM-1 and PTS-1 titanium powders and related porous materials prepared by sintering the powders and determined quantitative characteristics of the
... More
Source: Известия высших учебных заведений. Физика. 2023. Т. 66, № 12. С. 86-96
Type: статьи в журналах
Date: 2023
Description:
Приведены результаты исследования деформационного поведения композитного материала на основе керамического каркаса из ZrO2–Y2O3 с биополимерным наполнителем. По сравнению с аналогичным керамическим ма
... More
Source: Nanoscience and technology : an international journal. 2022. Vol. 13, № 2. P. 15-22
Type: статьи в журналах
Date: 2022
Source: Materials. 2022. Vol. 15, № 23. P. 8480 (1-17)
Type: статьи в журналах
Date: 2022
Description:
A comprehensive study was performed of the deformation and temperature behavior during quasi-static tension, as well as the peculiarities of accumulation and dissipation of energy during plastic defor
... More
Authors:
Sharkeev, Yuriy P. |
Eroshenko, Anna Yu. |
Legostaeva, Elena V. |
Kovalevskaya, Zhanna G. |
Belyavskaya, Olga A. |
Khimich, Margarita A. |
Epple, Matthias |
Prymak, Oleg |
Sokolova, Viktoriya |
Zhu, Qifang |
Sun, Zeming |
Zhang, Hongju
Source: Metals. 2022. Vol. 12, № 7. P. 1136 (1-30)
Type: статьи в журналах
Date: 2022
Description:
For this paper, studies of the microstructure as well as the mechanical and biological properties of bioinert titanium, zirconium, and niobium alloys in their nanostructured (NS) and ultrafine-grained
... More
Source: Metals. 2022. Vol. 12, № 1. P. 63 (1-16)
Type: статьи в журналах
Date: 2022
Description:
The deformation microstructures formed by novel multistage high-temperature thermomechanical treatment (HTMT) and their effect on the mechanical properties of austenitic reactor steel are investigated
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020050-1-020050-4
Type: статьи в журналах
Date: 2022
Description:
The atomic and electronic structures as well as the elastic properties of Ti5Si3 compound have been studied by the projector augmented-waves method within density functional theory. The electron energ
... More
Source: Journal of experimental and theoretical physics. 2022. Vol. 134, № 6. P. 743-753
Type: статьи в журналах
Date: 2022
Description:
The atomic and electronic structures, the elastic moduli, the vibrational frequencies, and the thermodynamic characteristics of the Ti5Si3 titanium silicide are calculated by the projector augmented w
... More
Authors:
Zhou, Meng |
Geng, Yongfeng |
Zhang, Yi |
Ban, Yijie |
Li, Xu |
Jia, Yanlin |
Liang, Shengli |
Tian, Baohong |
Liu, Yong |
Volinsky, Alex A.
Source: Materials characterization. 2022. Vol. 195. P. 112494 (1-9)
Type: статьи в журналах
Date: 2022
Description:
Copper alloys are widely used as lead frames, electric contact wires and pantographs due to their high electrical conductivity and excellent mechanical properties. At present work, a medium electrical
... More
Source: Journal of alloys and compounds. 2022. Vol. 918. P. 165617 (1-12)
Type: статьи в журналах
Date: 2022
Description:
Aluminum alloying effects (up to 2 at %) on the macrostructure, microstructure, and mechanical properties of porous nitinol (NiTi) obtained by self-propagating high-temperature synthesis (SHS) were st
... More
Source: Lubricants. 2022. Vol. 10, № 8. P. 178 (1-12)
Type: статьи в журналах
Date: 2022
Description:
The effect of the Ta content on the structure, mechanical properties and adhesion of magnetron-sputtered Ti1-x-y-zAlxTaySizN coatings was studied. According to the energy-dispersive X-ray spectroscopy
... More
Source: Metals. 2022. Vol. 12, № 6. P. 989 (1-11)
Type: статьи в журналах
Date: 2022
Description:
This paper investigates the impact of tungsten nanoparticles on the microstructure and mechanical properties of the Al-5Mg alloy. Tungsten concentrations of up to 0.5 wt.% led to a slight modification
... More