Add to Quick Collection
All 12 Results
Showing items 1 - 12 of 12.
Add All Items to Quick Collection
Authors:
Shabalina, Anastasiia V. |
Anikeev, Sergey G. |
Kulinich, Sergei A. |
Artyukhova, Nadezhda V. |
Vlasov, Vitaly A. |
Kaftaranova, Maria I. |
Khodorenko, Valentina N. |
Yakovlev, Evgeny V. |
Pesterev, Evgeny A. |
Lukyanenko, Anna V. |
Volochaev, Mikhail N. |
Pakholkina, Sofiya |
Mamazakirov, Oibek R. |
Stolyarov, Victor V. |
Mokshin, Anatolii V. |
Gunther, Victor E.
Source: Journal of functional biomaterials. 2023. Vol. 14, № 5. P. 277 (1-20)
Type: статьи в журналах
Date: 2023
Description:
TiNi alloys are very widely used materials in implant fabrication. When applied in rib replacement, they are required to be manufactured as combined porous-monolithic structures, ideally with a thin,
... More
Source: Journal of materials engineering and performance. 2023. Vol. 32, № 18. P. 8478-8492
Type: статьи в журналах
Date: 2023
Description:
The stable oxide layers formed by chemical or electron-beam treatments of TiNi shape memory alloys are able to provide a good corrosion resistance and prevent release of toxic Ni. The mechanisms respo
... More
Source: Applied sciences. 2021. Vol. 11, № 10. P. 4372 (1-14)
Type: статьи в журналах
Date: 2021
Description:
new approach to fabricate TiNi surfaces combining the advantages of both monolithic and porous materials for implants is used in this work. New materials were obtained by depositing a porous TiNi powd
... More
Source: Journal of surface investigation: X-ray, synchrotron and neutron techniques. 2021. Vol. 15, № 5. P. 1067-1071
Type: статьи в журналах
Date: 2021
Description:
The study of the influence of electron-beam treatment on the structural features of a TiNi powder alloy obtained by calcium-hydride reduction is carried out. It is found that electron-beam treatment l
... More
Source: Journal of Physics: Conference Series. 2021. Vol. 1989. P. 012003 (1-6)
Type: статьи в журналах
Date: 2021
Description:
This work comprises a study of the effect of silicon on the topographical parameters and mechanical properties of the Ti-Ni-Ta-Si surface alloy (SA) synthesized on the NiTisubstrates by the additive t
... More
Source: 2020 7th International Congress on energy fluxes and radiation effects (EFRE 2020), Tomsk, Russia, September 14 – 26, 2020 : proceedings. [S. l.], 2020. P. 1240-1243
Type: статьи в сборниках
Date: 2020
Description:
The paper addresses the study of the surface condition of two-dimensional porous TiNi-based powder materials produced by diffusion sintering and electron-beam processing. Methods of production of two-
... More
Source: Materials science and engineering A. 2019. Vol. 740/741. P. 381-389
Type: статьи в журналах
Date: 2019
Description:
The study deals with the impact of the pulse number at low-energy High-Current Pulsed Electron Beam (HCPEB) treatment at constant energy density ES upon the deformation behavior of TiNi alloy, its ine
... More
Source: International Workshop "Multiscale Biomechanics and Tribology of Inorganic and Organic Systems" ; Международная конференция "Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций" ; VIII Всероссийская научно-практическая конференция с международным участием, посвященная 50-летию основания Института химии нефти "Добыча, подготовка, транспорт нефти и газа" : тезисы докладов. Томск, 2019. С. 8-9
Type: статьи в сборниках
Date: 2019
Source: Applied surface science. 2018. Vol. 437. P. 217-226
Type: статьи в журналах
Date: 2018
Description:
The physical-mechanical properties of the Ti-Ta based surface alloy with thickness up to ∼2 μm fabricated through the multiple (up to 20 cycles) alternation of magnetron deposition of Ti70Ta30 (at.%)
... More
Authors:
Markov, Alexey B. |
Rotshtein, Vladimir P. |
Ozur, Grigory E. |
Meisner, Stanislav N. |
Yakovlev, Evgeny V. |
Semin, Viktor O. |
Mironov, Yu. P. |
Poletika, Tamara M. |
Girsova, Svetlana L. |
Meisner, Lyudmila L. |
Shepel, Daria A.
Source: Journal of alloys and compounds. 2018. Vol. 730. P. 376-385
Type: статьи в журналах
Date: 2018
Description:
TiNi shape memory alloys (SMAs) are unique metallic biomaterials due to the combination of superelasticity and high corrosion resistance. Important limitations for biomedical applications of TiNi SMAs
... More
Source: AIP Conference Proceedings. 2017. Vol. 1909. P. 020036-1-020036-4
Type: статьи в журналах
Date: 2017
Description:
The results of an experimental and theoretical study of shock-wave processes and spall fracture in an ultrafine-grained and coarse-grained (α + β) Ti–Al–V–Mo alloy under the action of a nanosecond rel
... More
Source: AIP Conference Proceedings. 2016. Vol. 1783. P. 020047-1-020047-4
Type: статьи в журналах
Date: 2016
Description:
The results of experimental and theoretical research of shock-wave and spalling phenomena in ultrafine-grained and coarse-grained (α + β) alloy Ti–6.2% Al–4.0% V (wt %) treated by a nanosecond relativ
... More