Add to Quick Collection
All 8 Results
Showing items 1 - 8 of 8.
Add All Items to Quick Collection
Authors:
Timofeeva, Ekaterina E. |
Panchenko, Elena Yu. |
Eftifeeva, Anna S. |
Tagiltsev, Anton I. |
Surikov, Nikita Yu. |
Tokhmetova, Aida B. |
Yanushonite, Eleonora I. |
Zherdeva, M. V. |
Karaman, Ibrahim |
Chumlyakov, Yuri I.
Source: Acta metallurgica Sinica (English letters). 2023. Vol. 36, № 4. P. 650-660
Type: статьи в журналах
Date: 2023
Description:
The study of the influence of the cobalt content on the cyclic stability of superelasticity (SE) was carried out in quenched Ni44Fe19Ga27Co10 and Ni39Fe19Ga27Co15 (at.%) single crystals under compress
... More
Source: Russian physics journal. 2023. Vol. 66, № 4. P. 398-403
Type: статьи в журналах
Date: 2023
Description:
The features of the microstructure of the high-nitrogen austenitic VNS-53-Sh steel after multidirectional isothermal forging have been studied by transmission electron microscopy. The formation of an
... More
Authors:
Tang, Shunlong |
Zhou, Meng |
Zhang, Yi |
Xu, Deye |
Zhang, Zhiyang |
Zheng, Xianhua |
Li, De |
Li, Xu |
Tian, Baohong |
Jia, Yanlin |
Liu, Yong |
Volinsky, Alex A. |
Marchenko, Ekaterina S.
Source: Materials science and engineering A. 2023. Vol. 871. P. 144910 (1-16)
Type: статьи в журналах
Date: 2023
Description:
In this paper, new Cu–Ni–Sn–Ti–Cr and Cu–Ni–Sn–Ti–Cr–Ce alloys were prepared and studied. After solution treatment and 60% cold rolling, the Cu–Ni–Sn–Ti–Cr alloy with micro-hardness of 221 HV, a tensi
... More
Authors:
Legostaeva, Elena V. |
Eroshenko, Anna Yu. |
Vavilov, Vladimir P. |
Skripnyak, Vladimir A. |
Luginin, Nikita |
Chulkov, Arsenii O. |
Kozulin, Alexander A. |
Skripnyak, Vladimir V. |
Schmidt, Juergen |
Tolmachev, Alexey I. |
Uvarkin, Pavel V. |
Sharkeev, Yuriy P.
Source: Metals. 2023. Vol. 13, № 5. P. 988 (1-17)
Type: статьи в журналах
Date: 2023
Description:
The microstructural investigation, mechanical properties, and accumulation and dissipation of energies of the magnesium alloy Mg-2.9Y-1.3Nd in the recrystallized state and after severe plastic deforma
... More
Source: Russian physics journal. 2023. Vol. 66, № 3. P. 341-349
Type: статьи в журналах
Date: 2023
Description:
Metal additive manufacturing is one of the new industrial technologies for fast prototyping of the metalcomponents with a complex internal architecture, gradient composition, or functionally gradient
... More
Source: Materials and manufacturing processes. 2023. Vol. 38, № 6. P. 659-667
Type: статьи в журналах
Date: 2023
Description:
Porous NiTi alloys were obtained by self-propagating high-temperature synthesis (SHS) using layer-bylayer combustion in closed and open gas flow reactors under a protective argon atmosphere. The maxim
... More
Source: Известия высших учебных заведений. Физика. 2023. Т. 66, № 12. С. 69-78
Type: статьи в журналах
Date: 2023
Description:
Приведены данные о микроструктуре, фазовом составе и микротвердости образцов сплавов TiNi в виде плоских вертикальных «стенок» высотой 110 мм, изготовленных методом двухпроволочного электронно-лучевог
... More
Source: Технологии безопасности жизнедеятельности. 2023. № 4. С. 43-53
Type: статьи в журналах
Date: 2023
Description:
В работе представлены результаты исследования аддитивного получения образцов на основе материала ZrO2 методом стереолитографической 3D-печати (DLP). Изучены параметры полимеризации суспензий с содержа
... More