Add to Quick Collection
All 104 Results
Showing items 61 - 75 of 104.
Add All Items to Quick Collection
Source: International journal of minerals, metallurgy, and materials. 2017. Vol. 24, № 5. P. 523-529
Type: статьи в журналах
Date: 2017
Description:
The effect of TiO2, ZrO2 and Na3AlF6 ultrafine powders on the fine structure and the phase composition of Fe–14Mn–1.2C steel was investigated. The introduction of the ultrafine powders into the melt i
... More
Source: Известия высших учебных заведений. Физика. 2017. Т. 60, № 12. С. 92-99
Type: статьи в журналах
Date: 2017
Description:
Исследовано структурно-фазовое состояние образцов, полученных совместным измельчением порошков Ti и Cu в различных условиях (с графитом, в петролейном эфире, в ксилоле). Показано, что после термическо
... More
Source: Известия высших учебных заведений. Физика. 2017. Т. 60, № 11. С. 56-60
Type: статьи в журналах
Date: 2017
Description:
Представлены результаты анализа структуры и фазового состава пленок оксида галлия, полученных ВЧ-магнетронным напылением. Показано, что в интервале 290-350 К рост проводимости пленок с повышением темп
... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 110. P. 012082 (1-6)
Type: статьи в журналах
Date: 2016
Description:
The results of experimental studies of metal powders composition produced by electrospark dispersion according to the scheme "metal electrodes - metal granule loading - distilled water" are given in t
... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 110. P. 012084 (1-5)
Type: статьи в журналах
Date: 2016
Description:
Phase composition, structure parameters and basic magnetic characteristics obtained by the sol-gel combustion nanopowders of ferrospinel CuFe2O4 are investigated. A comparison of the properties of syn
... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 112. P. 012038 (1-4)
Type: статьи в журналах
Date: 2016
Description:
The paper presents results of the structural and phase analysis of the surface layer composition in the type R65 rail steel in its original state and after long-term operation. It is shown that long-t
... More
Source: International journal of GEOMATE. 2016. Vol. 10, № 21. P. 1906-1911
Type: статьи в журналах
Date: 2016
Description:
Using atomic force, optical and electron microscopy methods, the changes in the microstructure and phase composition were investigated for the alloy Nb47%Ti used for the manufacture of superconducting
... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 112. P. 012032 (1-6)
Type: статьи в журналах
Date: 2016
Description:
The paper presents TEM analysis of microstructure, phase composition, and mechanical properties of commercially pure titanium. These properties of two types of grains are compared before and after mod
... More
Source: AIP Conference Proceedings. 2016. Vol. 1698. P. 060014-1-060014-5
Type: статьи в журналах
Date: 2016
Description:
The surface state of alkaline-earth metals and magnesium oxides obtained by means of commercial and laboratory ways has been studied in this paper. A complex of methods has been used for identificatio
... More
Source: AIP Conference Proceedings. 2016. Vol. 1772. P. 030017-1-030017-4
Type: статьи в журналах
Date: 2016
Description:
The purpose of this study is to investigate the phase composition, parameters of fine crystalline structure and mechanical properties of aluminum-based composites, produced by hot pressing with differ
... More
Source: AIP Conference Proceedings. 2016. Vol. 1783. P. 020047-1-020047-4
Type: статьи в журналах
Date: 2016
Description:
The results of experimental and theoretical research of shock-wave and spalling phenomena in ultrafine-grained and coarse-grained (α + β) alloy Ti–6.2% Al–4.0% V (wt %) treated by a nanosecond relativ
... More
Source: AIP Conference Proceedings. 2016. Vol. 1698. P. 060002-1-060002-6
Type: статьи в журналах
Date: 2016
Description:
The surface state of alkaline-earth metals and magnesium oxides obtained by means of commercial and laboratory ways has been studied in this paper. A complex of methods has been used for identificatio
... More
Source: Key engineering materials. 2016. Vol. 712. P. 200-204
Type: статьи в журналах
Date: 2016
Description:
Ceramic cordierite-based materials are widely used in metallurgy, mechanical engineering and in the chemical industry as refractories, filters and catalyst supports. In this article, the activation of
... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 112. P. 012039 (1-5)
Type: статьи в журналах
Date: 2016
Description:
This article deals with a method of obtaining materials in the Ti-Al system. Research was carried out in accordance with the phase diagram of the system state. It was established, that both single-pha
... More
Source: IOP Conference Series: Materials Science and Engineering. 2015. Vol. 98. P. 012032 (1-7)
Type: статьи в журналах
Date: 2015
Description:
Aluminium oxide-hydroxides obtained by means of the hydrothermal synthesis of aluminium nanopowder are of great interest in terms of the potential supports for heterogeneous catalysts due its high spe
... More
