Электронная библиотека (репозиторий) Томского государственного университета

Add to Quick Collection   All 157 Results

Showing items 1 - 15 of 157.
Sort:
 Add All Items to Quick Collection
Source: AIP Conference Proceedings. 2022. Vol. 2509, № 1. P. 020063-1-020063-4
Type: статьи в журналах
Date: 2022
Description: Deformation-induced surface roughness is mostly considered as an unwanted phenomenon leading to deterioration in material properties. However, geometrical changes of a material surface can serve as an ... More
Source: Physical Mesomechanics. 2022. Vol. 25, № 2. P. 142-148
Type: статьи в журналах
Date: 2022
Description: The paper analyzes the surface relief of a tungsten carbide-ferromanganese steel composite (WC-(Fe-Mn-C)) under axial compression, including its structure on the microscale (variation in coherent scat ... More
Source: Wear. 2022. Vol. 488-489. P. 204126 (1-14)
Type: статьи в журналах
Date: 2022
Description: Severe deformation of Hadfield steel occurs via different deformation mechanisms (slip or twinning) depending on the crystallographic orientation and direction of the applied load. The development of ... More
Source: Journal of alloys and compounds. 2022. Vol. 896. P. 162841 (1-9)
Type: статьи в журналах
Date: 2022
Description: The shape memory effect (SME) and superelasticity (SE) of Ni50.3Ti49.7 alloy single crystals were studied after quenching and marforming (deformation in the martensite phase, followed by annealing at ... More
Source: Journal of photochemistry and photobiology B: Biology. 2022. Vol. 230. P. 112438 (1-12)
Type: статьи в журналах
Date: 2022
Description: Proper rheological properties of red blood cells (RBC) including flexibility and aggregability are essential for healthy blood microcirculation. Excessive RBC aggregation has been observed to be assoc ... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020170-1-020170-4
Type: статьи в журналах
Date: 2022
Source: Engineering failure analysis. 2022. Vol. 137. P. 106377 (1-14)
Type: статьи в журналах
Date: 2022
Description: Experimental and numerical studies are performed to reveal an interrelation between mesoscale deformation-induced surface roughening and in-plane plastic strain in an aluminum alloy. Experimentally, r ... More
Source: Известия высших учебных заведений. Физика. 2022. Т. 65, № 4. С. 53-61
Type: статьи в журналах
Date: 2022
Description: Исследуется деформированное состояние на границе раздела в контактирующих телах при условиях идеального контакта и скольжения тел. Рассматриваемые граничные условия реализуются на границах раздела мно ... More
Source: Известия высших учебных заведений. Физика. 2022. Т. 65, № 5. С. 36-44
Type: статьи в журналах
Date: 2022
Description: Рассмотрена модель развития локализованного пластического течения твердых тел, основанная на представлениях о взаимодействии носителей пластичности и сигналов акустической эмиссии, возникающих при раз ... More
Source: Известия высших учебных заведений. Физика. 2022. Т. 65, № 8. С. 76-80
Type: статьи в журналах
Date: 2022
Description: В рамках существующих теорий зарождение пластического сдвига и зародышевых трещин в совершенных кристаллах возможно лишь при деформирующем напряжении, близком к теоретической прочности. В работе показ ... More
Source: The European physical journal plus. 2021. Vol. 136, № 4. P. 388 (1-7)
Type: статьи в журналах
Date: 2021
Description: In this paper, the effect of deformation of a fullerite crystal on the dynamic properties of a rotating C60 molecule located in the center of a selected fragment is analyzed. The spherical potential o ... More
Source: Metalurgija. 2021. Vol. 60, № 1/2. P. 55-58
Type: статьи в журналах
Date: 2021
Description: The present work is aimed at studying the macroscopic localization of plastic strain in low-carbon steel AISI A283 Grade C. The evolution of macroscopically localized plastic strain at various stages ... More
Source: Metals. 2021. Vol. 11, № 2. P. 279 (1-20)
Type: статьи в журналах
Date: 2021
Description: An experimental and theoretical investigation of the strength properties of aluminum alloys strengthened by dispersed nanoparticles, as well as the determination of the significance of various mechani ... More
Source: Metalurgija. 2021. Vol. 60, № 1/2. С. 59-62
Type: статьи в журналах
Date: 2021
Description: The regularities of non-uniform plastic deformation evolving on the Lüders bands are studied in a low carbon steel – austenite stainless steel bimetal via a digital image speckle method. The local str ... More
Source: Metals. 2021. Vol. 11, № 4. P. 582 (1-16)
Type: статьи в журналах
Date: 2021
Description: The importance of taking into account directional solidification of grains formed during 3D printing is determined by a substantial influence of their crystallographic orientation on the mechanical pr ... More

Date

^