Add to Quick Collection
All 4 Results
Showing items 1 - 4 of 4.
Add All Items to Quick Collection
Authors:
Ban, Yijie |
Zhou, Meng |
Zhang, Yi |
Jia, Yanlin |
Pang, Yong |
Li, Yunzhang |
Tang, Shunlong |
Li, Xu |
Volinsky, Alex A. |
Marchenko, Ekaterina S.
Source: Materials and design. 2023. Vol. 228. P. 111819 (1-10)
Type: статьи в журналах
Date: 2023
Description:
In the present work, the Cu-1.35Ni-1Co-0.55Si alloy with multiple twins and ultra-low interfacial mismatch precipitates was obtained by liquid nitrogen dynamic plastic deformation (DPD) and aging trea
... More
Authors:
Tang, Shunlong |
Zhou, Meng |
Zhang, Yi |
Xu, Deye |
Zhang, Zhiyang |
Zheng, Xianhua |
Li, De |
Li, Xu |
Tian, Baohong |
Jia, Yanlin |
Liu, Yong |
Volinsky, Alex A. |
Marchenko, Ekaterina S.
Source: Materials science and engineering A. 2023. Vol. 871. P. 144910 (1-16)
Type: статьи в журналах
Date: 2023
Description:
In this paper, new Cu–Ni–Sn–Ti–Cr and Cu–Ni–Sn–Ti–Cr–Ce alloys were prepared and studied. After solution treatment and 60% cold rolling, the Cu–Ni–Sn–Ti–Cr alloy with micro-hardness of 221 HV, a tensi
... More
Authors:
Tang, Shunlong |
Zhou, Meng |
Li, Xu |
Zhang, Yi |
Xu, Deye |
Zhang, Zhiyang |
Tian, Baohong |
Jia, Yanlin |
Liu, Yong |
Volinsky, Alex A. |
Marchenko, Ekaterina S.
Source: Materials today communications. 2022. Vol. 31. P. 103771 (1-13)
Type: статьи в журналах
Date: 2022
Description:
The Cu-1Ni-0.9Sn-0.5Ti-0.3Cr alloy was prepared by vacuum induction melting. The hot deformation experiments with the alloy were carried out using the Gleeble-1500 deformation simulation device at 0.0
... More
Source: Nanomaterials. 2022. Vol. 12, № 24. P. 4442 (1-11)
Type: статьи в журналах
Date: 2022
Description:
This paper studied the features of the martensitic transformations and mechanical properties of 40, 60, and 90 µm thick NiTi wires with nanocrystalline B2 structures. It was established that the wires
... More
