Add to Quick Collection
All 9 Results
Showing items 1 - 9 of 9.
Add All Items to Quick Collection
Authors:
Marchenko, Ekaterina S. |
Baigonakova, Gulsharat A. |
Khrustalev, Anton P. |
Zhukov, Ilya A. |
Vorozhtsov, Alexander B. |
Chekalkin, Timofey L. |
Monogenov, Alexander N. |
Garin, Alexander S. |
Kim, Tae-Woo |
Kang, Seung-Baik
Source: Materials Chemistry and Physics. 2023. Vol. 295. P. 126959 (1-9)
Type: статьи в журналах
Date: 2023
Description:
This work aims to study microstructural features, phase composition, topology, surface potential, and the biodegradation performance of Mg–4Zn–1Ca-based alloys whose melts were ultrasonically (US) tre
... More
Source: Physica scripta. 2023. Vol. 98, № 2. P. 025703
Type: статьи в журналах
Date: 2023
Description:
AlMgB14 materials were obtained by hot-pressing of the prereacted AlMgB14 powder. The phase composition, structure, hardness and flexural strength have been studied. The XRD studies shown that the pha
... More
Source: Vacuum. 2023. Vol. 207. P. 111630 (1-8)
Type: статьи в журналах
Date: 2023
Description:
The study addresses the control of the biodegradation rate of the magnesium–zinc–calcium (Mg–Ca–Zn) alloy, and improvement of its biocorrosion resistance and cytocompatibility using titanium nitride (
... More
Source: Metals. 2022. Vol. 12, № 10. P. 1603 (1-15)
Type: статьи в журналах
Date: 2022
Description:
This work aims to study the cytocompatibility of protective coatings obtained in argon and nitrogen atmospheres on a TiNi surface. Particular attention is paid to comparing the interaction of cell cul
... More
Source: Materials. 2022. Vol. 15, № 23. P. 8450 (1-28)
Type: статьи в журналах
Date: 2022
Description:
It is known that the presence of oxygen phases in hard materials leads to an undesirable decrease in the mechanical properties. In materials based on AlMgB14, the main oxygen impurity is spinel MgAl2O
... More
Source: Metals. 2022. Vol. 12, № 7. P. 1131 (1-11)
Type: статьи в журналах
Date: 2022
Description:
The present article is aimed at studying the deformation behavior of TiNi wire and knitted metal TiNi mesh under uniaxial tension and revealing the role of wire geometry on their main mechanical chara
... More
Source: Surface and coatings technology. 2022. Vol. 436. P. 128291 (1-12)
Type: статьи в журналах
Date: 2022
Description:
In the study, gradient coatings with a nanometer thickness were successfully synthesized from Ti/Ni/Ti nanolaminates on the TiNi substrate in a nitrogen atmosphere at 900 °C. A technique for producing
... More
Source: Materials. 2022. Vol. 15, № 23. P. 8359 (1-15)
Type: статьи в журналах
Date: 2022
Description:
The phase composition, microstructure, and multiple shape memory effect of TiNi50−xVx alloys were studied in this work. The phase composition of the TiNi50−xVx system is the TiNi matrix, spherical par
... More
Source: Metals. 2022. Vol. 12, № 2. P. 206 (1-14)
Type: статьи в журналах
Date: 2022
Description:
The paper addresses the production and investigation of the Mg–Ca–Zn alloy dispersionhardened by diamond nanoparticles. Structural studies have shown that diamond nanoparticles have a modifying effect
... More