Электронная библиотека (репозиторий) Томского государственного университета

Add to Quick Collection   All 34 Results

Showing items 1 - 15 of 34.
Sort:
 Add All Items to Quick Collection
Add   Effects of sintering temperature on the microstructure and properties of a W-Cu pseudo-alloy
Authors: Lebedev, Mikhail | Promakhov, Vladimir V. | Schulz, Nikita | Vorozhtsov, Alexander B. | Lerner, Marat I.
Source: Metals. 2023. Vol. 13, № 10. P. 1741 (1-15)
Type: статьи в журналах
Date: 2023
Description: This paper studies the feasibility of fabricating pseudo-alloys based on a W-Cu system through vacuum sintering of spherical bimetallic particles synthesized using the electric explosion of copper–tun ... More
Add   Strength characteristics of a heat-resistant metal-matrix composite inconel 625–5%NiTi–TiB2 alloy fabricated by direct laser deposition under shock-wave loading
Authors: Razorenov, Sergey V. | Garkushin, Gennady V. | Savinykh, Andrey S. | Promakhov, Vladimir V. | Matveev, Alexey E. | Klimova-Korsmik, Olga G. | Vorozhtsov, Alexander B.
Source: Metals. 2023. Vol. 13, № 3. P. 477 (1-9)
Type: статьи в журналах
Date: 2023
Description: The Hugoniot elastic limit and spall strength were measured for a heat-resistant metalmatrix composite Inconel 625–5%NiTi–TiB2 alloy additive manufactured (AM) by direct laser deposition. The strength ... More
Add   Study of the phase composition, structure and mechanical properties of synthetic composites produced by high-temperature vacuum sintering of SHS-fabricated CrNi-TiN powders
Authors: Matveev, Alexey E. | Promakhov, Vladimir V. | Schulz, Nikita | Bakhmat, Vladislav | Babaev, Artem | Vorozhtsov, Alexander B.
Source: Metals. 2023. Vol. 13, № 5. P. 846 (1-14)
Type: статьи в журналах
Date: 2023
Description: This work studies the phase composition, structure and mechanical properties of composite materials obtained by high-temperature vacuum sintering of SHS-fabricated CrNi–TiN powders synthesized in semi ... More
Add   X-ray tomographic method to study the internal structure of a TiNi-TiB2 metal matrix composite obtained by direct laser deposition
Authors: Korobenkov, Maxim | Lebedev, Mikhail | Promakhov, Vladimir V. | Narikovich, Anton
Source: Materials. 2023. Vol. 16, № 4. P. 1353 (1-12)
Type: статьи в журналах
Date: 2023
Description: The field of additive manufacturing (AM) of various materials is rapidly developing. At the stage of designing and growing products and for the quality control of finished parts, non-destructive metho ... More
Add   3D printing using Ti-Al nanopowders: mechanisms of structure formation
Authors: Promakhov, Vladimir V. | Matveev, Alexey E. | Babaev, Artem | Schulz, Nikita | Toropkov, Nikita E. | Vorozhtsov, Alexander B. | Lerner, Marat I.
Source: Metals. 2022. Vol. 12, № 10. P. 1737 (1-12)
Type: статьи в журналах
Date: 2022
Description: In the presented research work, 3D materials were fabricated by additive moulding by means of extrusion of a mixture of high filled polymers and nanopowders of Ti-Al intermetallides with subsequent si ... More
Add   Effect of the mass fraction of NiTi–TiB2 SHS-particles on the phase composition, structure, and mechanical properties of inconel 625–NiTi–TiB2 composites produced by direct laser deposition
Authors: Matveev, Alexey E. | Promakhov, Vladimir V. | Schulz, Nikita | Bakhmat, Vladislav | Babaev, Artem | Semenov, Artem | Vorozhtsov, Alexander B.
Source: Materials. 2022. Vol. 15, № 19. P. 6861 (1-15)
Type: статьи в журналах
Date: 2022
Description: This paper studies the impact of the mass fraction of NiTi–TiB2 particles obtained by the method of self-propagating high-temperature synthesis (SHS) on the phase composition, structure, and mechanica ... More
Add   Preparation of porous TiNi-Ti alloy by diffusion sintering method and study of its composition, structure and martensitic transformations
Authors: Anikeev, Sergey G. | Artyukhova, Nadezhda V. | Shabalina, Anastasiia V. | Kulinich, Sergei A. | Khodorenko, Valentina N. | Kaftaranova, Maria I. | Promakhov, Vladimir V. | Gunther, Victor E.
Source: Journal of alloys and compounds. 2022. Vol. 900. P. 163559 (1-8)
Type: статьи в журналах
Date: 2022
Description: The study demonstrates a method for controlling not only the phase composition but also the atomic composition of TiNi matrix in porous TiNi-Ti alloys developed for biomedical uses as implants. The al ... More
Add   Processes of physical treatment of stainless steels obtained by additive manufacturing
Authors: Babaev, Artem | Promakhov, Vladimir V. | Schulz, Nikita | Semenov, Artem | Bakhmat, Vladislav | Vorozhtsov, Alexander B.
Source: Metals. 2022. Vol. 12, № 9. P. 1449 (1-18)
Type: статьи в журналах
Date: 2022
Description: With a vista of available stainless steel grades at our disposal, it is possible to manufacture items for a wide range of industries. These include chemicals production, medicine, and pharmacology, ae ... More
Add   Structure and properties of metal-matrix composites based on an inconel 625–Tib2 system fabricated by additive manufacturing
Authors: Promakhov, Vladimir V. | Matveev, Alexey E. | Klimova-Korsmik, Olga | Schulz, Nikita | Bakhmat, Vladislav | Babaev, Artem | Vorozhtsov, Alexander B.
Source: Metals. 2022. Vol. 12, № 3. P. 525 (1-10)
Type: статьи в журналах
Date: 2022
Description: This research work studies the structural phase parameters and physicomechanical properties of metal-matrix composite materials based on a Ni–TiB2 system obtained by additive manufacturing (specifical ... More
Add   Structure, properties and phase composition of composite materials based on the system NiTi-TiB2
Authors: Promakhov, Vladimir V. | Matveev, Alexey E. | Schulz, Nikita | Dronov, Philip | Zhukov, Alexander S. | Vorozhtsov, Alexander B.
Source: Materials. 2022. Vol. 15, № 15. P. 5327 (1-12)
Type: статьи в журналах
Date: 2022
Description: This article considers issues pertinent to the research of the phase composition, structure and mechanical properties of materials obtained from powders of composite (Ni-Ti)-TiB2, which have prospecti ... More
Add   Study of the machinability of an Inconel 625 composite with added NiTi-TiB2 fabricated by direct laser deposition
Authors: Arlyapov, Alexey | Volkov, Sergey | Promakhov, Vladimir V. | Matveev, Alexey E. | Babaev, Artem | Vorozhtsov, Alexander B. | Zhukov, Alexander S.
Source: Metals. 2022. Vol. 12, № 11. P. 1956 (1-13)
Type: статьи в журналах
Date: 2022
Description: This work studies the process feasibility of milling a metal-matrix composite based on Inconel 625 with added NiTi-TiB2 fabricated by direct laser deposition. The composite is intended for manufacturi ... More
Add   High-temperature synthesis of metal–matrix composites (Ni-Ti)-TiB2
Authors: Promakhov, Vladimir V. | Matveev, Alexey E. | Schulz, Nikita | Grigoriev, Mikhail | Olisov, Andrey | Vorozhtsov, Alexander B. | Zhukov, Alexander S. | Klimenko, Viktor
Source: Applied sciences. 2021. Vol. 11, № 5. P. 2426 (1-11)
Type: статьи в журналах
Date: 2021
Description: Currently, metal–matrix composite materials are some of the most promising types of materials, and they combine the advantages of a metal matrix and reinforcing particles/fibres. Within the framework ... More
Add   Investigation of the dynamic behaviour ceramic matrix composites obtained by additive technologies
Authors: Promakhov, Vladimir V. | Vorozhtsov, Alexander B. | Korobenkov, Maxim V. | Schults, Nikita | Bakhmat, Vladislav | Dronov, Filipp
Source: Materials research express. 2021. Vol. 8, № 2. P. 026503 (1-11)
Type: статьи в журналах
Date: 2021
Description: Additive technologies open up new possibilities for creating materials with controlled structural features including ceramic composites. Such composites have good strength properties, fracture toughne ... More
Add   Researching the properties of samples fabricated using selective laser melting from a high‐temperature nickel‐based alloy
Authors: Mazalov, Alexey | Shmatov, Dmitry | Zelenina, Lydia | Platko, Dmitry | Promakhov, Vladimir V. | Vorozhtsov, Alexander B. | Schulz, Nikita
Source: Applied sciences. 2021. Vol. 11, № 4. P. 1419 (1-10)
Type: статьи в журналах
Date: 2021
Description: A possible application of a metal powder composition made of a high‐temperature nickelbased alloy with high heat strength (the material is analogous to Inconel 718) in selective laser melting (SLM, an ... More
Add   Review of the problems of additive manufacturing of nanostructured high-energy materials
Authors: Kudryashova, Olga B. | Lerner, Marat I. | Vorozhtsov, Alexander B. | Sokolov, Sergei D. | Promakhov, Vladimir V.
Source: Materials. 2021. Vol. 14, № 23. P. 7394 (1-18)
Type: статьи в журналах
Date: 2021
Description: This article dwells upon the additive manufacturing of high-energy materials (HEM) with regards to the problems of this technology’s development. This work is aimed at identifying and describing the m ... More

Creator

Date

Subject

Resource Type

^