Add to Quick Collection
All 45 Results
Showing items 31 - 45 of 45.
Add All Items to Quick Collection
Source: Vacuum. 2019. Vol. 159. P. 441-446
Type: статьи в журналах
Date: 2019
Description:
In this paper we suggest a new method of producing a Fe-28 wt% Cu composite by compacting and subsequent sintering of bimetallic nanoparticles made of metals with limited mutual miscibility: iron and
... More
Source: Ultrasonics sonochemistry. 2019. № 55. P. 246-255
Type: статьи в журналах
Date: 2019
Description:
The acoustic streaming behaviour below an ultrasonic sonotrode in water was predicted by numerical simulation and validated by experimental studies. The flow was calculated by solving the transient Re
... More
Source: Ultrasonics sonochemistry. 2018. Vol. 42. P. 411-421
Type: статьи в журналах
Date: 2018
Description:
In an attempt to quantify the instantaneous pressure field in cavitating liquids at large forcing signals, pressures were measured in four different liquids contained in vessels with a frequency mode
... More
Source: Journal of alloys and compounds. 2018. Vol. 743. P. 626-638
Type: статьи в журналах
Date: 2018
Description:
Phase equilibria and phase transformations during the solidification of alloys in the Al-Al3Zr corner of the Al-Zr system were investigated using both theoretical (DFT and Calphad modelling) and exper
... More
Source: Metallurgical and materials transactions B. 2017. Vol. 48B, № 1. P. 208-219
Type: статьи в журналах
Date: 2017
Source: Materials Science and Technology. 2017. Vol. 33, № 6. P. 636-645
Type: статьи в журналах
Date: 2017
Description:
Ultrasonic melt processing attracts since the 1930 a lot of interest both from academic researchers and industry. In the last 10 years the interest to ultrasonic melt processing grew with regard to un
... More
Source: Acta materialia. 2016. Vol. 116. P. 354-363
Type: статьи в журналах
Date: 2016
Description:
The mechanism underlying the considerable refinement of primary Al3Ti intermetallic particles induced by ultrasonic treatment (UST) in an Al-0.4 wt% Ti alloy in the fully liquid state was investigated
... More
Source: Sensors and actuators A : Physical. 2016. Vol. 240. P. 57-69
Type: статьи в журналах
Date: 2016
Description:
This paper describes a series of systematic experimental studies to evaluate the performance of a high-temperature cavitometer under well-controlled conditions. The cavitometer was specifically design
... More
Source: Journal of materials processing technology. 2016. Vol. 229. P. 582-586
Type: статьи в журналах
Date: 2016
Description:
Currently, fundamental experimental studies in liquid metals are limited as there are very few availableexperimental tools for directly measuring acoustic cavitation in such extreme environments. In t
... More
Source: Journal of crystal growth. 2016. Vol. 435. P. 24-30
Type: статьи в журналах
Date: 2016
Description:
High intensity ultrasonic melt treatment was applied to an Al–0.4 wt% Ti alloy over three selected temperature ranges: 810 to 770 °C (above liquidus), 770 to 730 °C (across liquidus), and 730 to 690 °
... More
Source: Materials and design. 2016. Vol. 90. P. 979-983
Type: статьи в журналах
Date: 2016
Description:
The application of ultrasound to casting processes is a subject of great interest: the resulting degassing, sonocrystallization, wetting, fragmentation, de-agglomeration and dispersion yield an improv
... More
Source: Journal of materials processing technology. 2015. Vol. 222. P. 148-154
Type: статьи в журналах
Date: 2015
Description:
A flat plate sonotrode was used for ultrasonic melt processing (degassing) of aluminum melts. Calculations showed that this sonotrode should have several antinodes with maximum amplitude, spaced at 16
... More
Source: Advances in materials science and engineering. 2015. Vol. 2015, Article ID 718207. P. 1-6
Type: статьи в журналах
Date: 2015
Source: Materials Science and Technology. 2015. Vol. 31, № 1. P. 79-84
Type: статьи в журналах
Date: 2015
Source: Materials science forum. 2014. Vol. 794/796. P. 101-106
Type: статьи в журналах
Date: 2014
