Электронная библиотека (репозиторий) Томского государственного университета

Add to Quick Collection   All 14 Results

Showing items 1 - 14 of 14.
  • «
  • 1
  • »
Sort:
 Add All Items to Quick Collection
Source: Materials. 2023. Vol. 16, № 3. P. 955 (1-14)
Type: статьи в журналах
Date: 2023
Description: A novel approach to electric explosion of intertwined wires to obtain homogeneous powder mixtures intended for preparing feedstock for extrusion 3D printing has been applied. The powder were composed ... More
Source: International journal of refractory metals and hard materials. 2022. Vol. 103. P. 105735 (1-11)
Type: статьи в журналах
Date: 2022
Description: Nanostructured W-31wt.%Cu composite was for the first time produced via magnetic pulse compaction from bimetallic particles obtained using electric explosion of intertwisted copper/tungsten wires in a ... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020049-1-020049-4
Type: статьи в журналах
Date: 2022
Source: Powder Technology. 2022. Vol. 397. P. 117093 (1-11)
Type: статьи в журналах
Date: 2022
Description: Novel mixtures of micro- and nanoparticles have been obtained by simultaneous electrical explosion of three intertwisted wires (EEW). The possibility of obtaining of titanium‑aluminum micro- and nanop ... More
Source: Lubricants. 2022. Vol. 10, № 7. P. 140 (1-27)
Type: статьи в журналах
Date: 2022
Description: WC/Y-TZP-Al2O3 hybrid ceramic-matrix composites (CMCs) with dispersed Hadfield steel particles were sintered and then tested at sliding speeds in the range of 7-37 m/s and contact pressure 5 MPa. Fast ... More
Source: Friction. 2018. Vol. 6, № 3. P. 323-340
Type: статьи в журналах
Date: 2018
Description: In this research, results of the investigation of the sliding friction and wear of yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) and Y-TZP-Al2O3 samples preliminarily subjected to low- ... More
Source: Wear. 2018. Vol. 410/411. P. 210-221
Type: статьи в журналах
Date: 2018
Description: The crystalline lattice reorientation in copper single crystals resulted from friction-induced subsurface deformation has been studied by means of electron back scattering diffraction as well as optic ... More
Source: Journal of materials processing technology. 2017. Vol. 246. P. 224-234
Type: статьи в журналах
Date: 2017
Description: Acoustic emission (AE) study of steady and chatter mode peakless tool turning has been carried out in order to reveal an acoustic emission response to the workpiece chatter during fine turning. Molecu ... More
Source: AIP Conference Proceedings. 2016. Vol. 1783. P. 020128-1-020128-4
Type: статьи в журналах
Date: 2016
Description: In the paper the influence of friction-induced adhesion of metal to the tool on the formation of surface topography under nanostructuring burnishing was studied. A comprehensive approach, including bo ... More
Source: Перспективные материалы с иерархической структурой для новых технологий и надежных конструкций : международная конференция, 21-25 сентября 2015 г., Томск, Россия : тезисы докладов. Томск, 2015. С. 534-535
Type: статьи в сборниках
Date: 2015
Source: International journal of plasticity. 2015. Vol. 69. P. 36-53
Type: статьи в журналах
Date: 2015
Description: The surface deformation-induced pattern (relief) of copper single crystals with the orientation of the compression axis along [111] has been investigated by means of optical, scanning electron and ato ... More
Source: Advanced Materials Research. 2015. Vol. 1085. P. 351-357
Type: статьи в журналах
Date: 2015
Source: Applied surface science. 2013. Vol. 274. P. 22-26
Type: статьи в журналах
Date: 2013
  • «
  • 1
  • »
^