Электронная библиотека (репозиторий) Томского государственного университета
Filippov, Andrey V.

Add to Quick Collection   All 12 Results

Showing items 1 - 12 of 12.
  • «
  • ←
  • 1
  • →
  • »
Sort:
 Add All Items to Quick Collection
Add   Multiscale deformation-induced surface pattern in 3D-printed AlSi10Mg under uniaxial compression
Authors: Romanova, Varvara A. | Balokhonov, Ruslan R. | Zinovieva, Olga S. | Borodina, A. | Filippov, Andrey V. | Zinoviev, A. V. | Balokhonov, V.
Source: Materials science and engineering A. 2025. Vol. 923. P. 147684 (1-14)
Type: статьи в журналах
Date: 2025
Description: Surface roughening, which typically accompanies plastic deformation of metals, is often considered detrimental. Using small-size samples, this study focuses on deformation-induced roughening in 3D pri ... More
Add   Deformation and wear of Hadfield steel single crystals under dry sliding friction
Authors: Lychagin, Dmitry V. | Filippov, Andrey V. | Novitskaya, Olga S. | Kolubaev, A. V. | Moskvichev, Evgeny N. | Fortuna, S. V. | Chumlyakov, Yuri I.
Source: Wear. 2022. Vol. 488-489. P. 204126 (1-14)
Type: статьи в журналах
Date: 2022
Description: Severe deformation of Hadfield steel occurs via different deformation mechanisms (slip or twinning) depending on the crystallographic orientation and direction of the applied load. The development of ... More
Add   Microstructure and properties of a nanostructured W-31 wt% Cu composite produced by magnetic pulse compaction of bimetallic nanoparticles
Authors: Pervikov, Alexander V. | Filippov, Andrey V. | Mironov, Yuri P. | Kalashnikov, Mark P. | Krinitcyn, Maksim G. | Eskin, Dmitry G. | Lerner, Marat I. | Tarasov, Sergey Yu.
Source: International journal of refractory metals and hard materials. 2022. Vol. 103. P. 105735 (1-11)
Type: статьи в журналах
Date: 2022
Description: Nanostructured W-31wt.%Cu composite was for the first time produced via magnetic pulse compaction from bimetallic particles obtained using electric explosion of intertwisted copper/tungsten wires in a ... More
Add   Effects of the grain shape and crystallographic texture on the grain-scale mechanical behavior of additively manufactured aluminum alloys
Authors: Romanova, Varvara A. | Zinovieva, O. S. | Balokhonov, Ruslan R. | Dymnich, E. | Moskvichev, Evgeny N. | Filippov, Andrey V. | Lychagin, Dmitry V.
Source: Additive manufacturing. 2021. Vol. 48, p. A. P. 102415 (1-11)
Type: статьи в журналах
Date: 2021
Description: The grain shape and texture effects in aluminum alloys manufactured by selective laser melting are studied numerically in terms of micromechanical simulations. The method of step-by-step packing is ad ... More
Add   Structure and mechanical properties of Cu–Al–Si–Mn system-based copper alloy obtained by additive manufacturing
Authors: Khoroshko, E. S. | Filippov, Andrey V. | Shamarin, N. N. | Moskvichev, Evgeny N. | Utyaganova, V. R. | Tarasov, Sergey Yu. | Savchenko, Nikolai L. | Kolubaev, Evgeniy A. | Rubtsov, V. E. | Lychagin, Dmitry V.
Source: Russian physics journal. 2021. Vol. 64, № 2. P. 333-339
Type: статьи в журналах
Date: 2021
Add   Acoustic emission characterization of sliding wear under condition of direct and inverse transformations in low-temperature degradation aged Y-TZP and Y-TZP-AL2O3
Authors: Savchenko, Nikolai L. | Filippov, Andrey V. | Tarasov, Sergey Yu. | Dmitriev, Andrey I. | Shilko, Evgeny V. | Grigoriev, Aleksandr S.
Source: Friction. 2018. Vol. 6, № 3. P. 323-340
Type: статьи в журналах
Date: 2018
Description: In this research, results of the investigation of the sliding friction and wear of yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) and Y-TZP-Al2O3 samples preliminarily subjected to low- ... More
Add   Comparison of friction and acoustic emission of Hadfield steel single crystals
Authors: Filippov, Andrey V. | Kolubaev, Evgeniy A. | Sizova, O. V. | Tsvetkov, N. A. | Lychagin, Dmitry V.
Source: XII международная конференция "Механика, ресурс и диагностика материалов и конструкций" : сборник материалов (Екатеринбург, 21-25 мая 2018 г.). Екатеринбург, 2018. С. 210
Type: статьи в сборниках
Date: 2018
Add   Dry sliding of Hadfield steel single crystal oriented to deformation by slip and twinning: Deformation, wear, and acoustic emission characterization
Authors: Filippov, Andrey V. | Kolubaev, Evgeniy A. | Novitskaia, O. S. | Chumlyakov, Yuri I. | Kolubaev, A. V. | Lychagin, Dmitry V.
Source: Tribology international. 2018. Vol. 119. P. 1-18
Type: статьи в журналах
Date: 2018
Description: This paper studies Hadfield steel single crystals with the orientation of the normal load axis and friction axis . The chosen orientation implies that deformation develops by slip and twinning. Analys ... More
Add   Octahedral slip in nickel single crystals induced by scratch testing
Authors: Alfyorova, Ekaterina A. | Lychagin, Dmitry V. | Filippov, Andrey V.
Source: Письма о материалах. 2018. Т. 8, № 4. С. 415-418
Type: статьи в журналах
Date: 2018
Description: Investigation of the effect of crystallographic orientation on mechanical properties, behavior under loading, or deformation relief of single crystals is topical. One of the methods that make it possi ... More
Add   Relationship between acoustic emission and microcrack formation in single crystals of Hadfield steel
Authors: Filippov, Andrey V. | Moskvichev, Evgeny N. | Novitskaia, O. S. | Kolubaev, Evgeniy A. | Lychagin, Dmitry V.
Source: AIP Conference Proceedings. 2018. Vol. 2051. P. 020180-1-020180-4
Type: статьи в журналах
Date: 2018
Description: Abrasive wear is not favorable for Hadfield steel. The connection between the acoustic emission signal and the
Add   Vibration and acoustic emission monitoring the stability of peakless tool turning: Experiment and modeling
Authors: Filippov, Andrey V. | Rubtsov, Valery E. | Dmitriev, Andrey I. | Tarasov, Sergey Yu. | Nikonov, Anton Yu.
Source: Journal of materials processing technology. 2017. Vol. 246. P. 224-234
Type: статьи в журналах
Date: 2017
Description: Acoustic emission (AE) study of steady and chatter mode peakless tool turning has been carried out in order to reveal an acoustic emission response to the workpiece chatter during fine turning. Molecu ... More
Add   Effect of adhesion transfer on the surface pattern regularity in nanostructuring burnishing
Authors: Kuznetsov, Viktor P. | Nikonov, Anton Yu. | Filippov, Andrey V. | Voropaev, Vladimir V. | Dmitriev, Andrey I. | Tarasov, Sergey Yu.
Source: AIP Conference Proceedings. 2016. Vol. 1783. P. 020128-1-020128-4
Type: статьи в журналах
Date: 2016
Description: In the paper the influence of friction-induced adhesion of metal to the tool on the formation of surface topography under nanostructuring burnishing was studied. A comprehensive approach, including bo ... More
  • «
  • ←
  • 1
  • →
  • »
^