Add to Quick Collection
All 35 Results
Showing items 1 - 15 of 35.
Add All Items to Quick Collection
Source: Metals. 2022. Vol. 12, № 6. P. 989 (1-11)
Type: статьи в журналах
Date: 2022
Description:
This paper investigates the impact of tungsten nanoparticles on the microstructure and mechanical properties of the Al-5Mg alloy. Tungsten concentrations of up to 0.5 wt.% led to a slight modification
... More
Source: Behavior of materials under impact, explosion, high pressures and dynamic strain rates. Cham, 2022. P. 69-82
Type: статьи в сборниках
Date: 2022
Description:
This paper presents the results of research on superhard coatings obtained by the interaction of high-speed powder clouds with a titanium substrate. High-speed powder clouds were obtained under condit
... More
Source: Материалы XI Всероссийской научной конференции с международным участием "Актуальные проблемы современной механики сплошных сред и небесной механики – 2021", г. Томск, 17-21 ноября 2021 г.. Томск, 2022. С. 353-356
Type: статьи в сборниках
Date: 2022
Description:
В данной работе было рассмотрено исследование влияния наноразмерных частиц алмаза, полученных методом детонационного синтеза, на структуру и механические свойства магниевого сплава Mg-Ca-Zn для медици
... More
Source: Материалы XI Всероссийской научной конференции с международным участием "Актуальные проблемы современной механики сплошных сред и небесной механики – 2021", г. Томск, 17-21 ноября 2021 г.. Томск, 2022. С. 137-142
Type: статьи в сборниках
Date: 2022
Description:
В работе рассматривается получение и исследование магниевого сплава Mg– Ca–Zn, упрочненного наночастицами алмаза, введенных в составе лигатуры, полученной методом ударно-волнового компактирования. Вве
... More
Source: Journal of alloys and compounds. 2022. Vol. 918. P. 165617 (1-12)
Type: статьи в журналах
Date: 2022
Description:
Aluminum alloying effects (up to 2 at %) on the macrostructure, microstructure, and mechanical properties of porous nitinol (NiTi) obtained by self-propagating high-temperature synthesis (SHS) were st
... More
Source: Materials science and engineering A. 2022. Vol. 843. P. 143159 (1-37)
Type: статьи в журналах
Date: 2022
Description:
A comparative study of the effectiveness of carbide and oxide types of strengthening of V–Cr–Zr alloy was carried out by means of a comprehensive certification of structural-phase state parameters and
... More
Source: Russian physics journal. 2022. Vol. 65, № 3. P. 586-588
Type: статьи в журналах
Date: 2022
Source: Inorganic materials: applied research. 2022. Vol. 13, № 5. P. 1247-1260
Type: статьи в журналах
Date: 2022
Source: Materials. 2022. Vol. 15, № 23. P. 8480 (1-17)
Type: статьи в журналах
Date: 2022
Description:
A comprehensive study was performed of the deformation and temperature behavior during quasi-static tension, as well as the peculiarities of accumulation and dissipation of energy during plastic defor
... More
Source: Journal of experimental and theoretical physics. 2022. Vol. 134, № 6. P. 743-753
Type: статьи в журналах
Date: 2022
Description:
The atomic and electronic structures, the elastic moduli, the vibrational frequencies, and the thermodynamic characteristics of the Ti5Si3 titanium silicide are calculated by the projector augmented w
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020050-1-020050-4
Type: статьи в журналах
Date: 2022
Description:
The atomic and electronic structures as well as the elastic properties of Ti5Si3 compound have been studied by the projector augmented-waves method within density functional theory. The electron energ
... More
Source: Материалы XI Всероссийской научной конференции с международным участием "Актуальные проблемы современной механики сплошных сред и небесной механики – 2021", г. Томск, 17-21 ноября 2021 г.. Томск, 2022. С. 192-196
Type: статьи в сборниках
Date: 2022
Description:
В настоящей работе исследуются алюминиево-магниевые сплавы марки АМг5, содержащие наночастицы W. Приведены результаты измерения твердости и микротвердости исследуемых сплавов. Проведен анализ влияния
... More
Source: Материалы XI Всероссийской научной конференции с международным участием "Актуальные проблемы современной механики сплошных сред и небесной механики – 2021", г. Томск, 17-21 ноября 2021 г.. Томск, 2022. С. 381-385
Type: статьи в сборниках
Date: 2022
Description:
Внедрение в промышленность конструкционных материалов, сочетающих высокую прочность и низкий удельный вес, обеспечивает повышение энергетической эффективности. Деталь определённых габаритов из алюмини
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020179-1-020179-4
Type: статьи в журналах
Date: 2022
Description:
The results of studying the microstructure and mechanical properties of the V-W-Cr alloy after different regimes of thermomechanical treatment are presented. It is shown that the use of the modified r
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020129-1-020129-4
Type: статьи в журналах
Date: 2022
Description:
The work presents a study the mechanical properties of porous titanium nickelide and to study the evolution of deformation fields at the meso- and macroscopic level on the surface of porous titanium n
... More