Электронная библиотека (репозиторий) Томского государственного университета
механические свойства | 2022

Add to Quick Collection   All 35 Results

Showing items 1 - 15 of 35.
Sort:
 Add All Items to Quick Collection
Add   A novel mechanical two-dimensional tetrachiral metamaterial
Authors: Akhmetshin, Linar R.
Source: Nanoscience and technology : an international journal. 2022. Vol. 13, № 2. P. 15-22
Type: статьи в журналах
Date: 2022
Add   Comparative investigation of the influence of ultrafine-grained state on deformation and temperature behavior and microstructure formed during quasi-static tension of pure titanium and Ti-45Nb alloy by means of infrared thermography
Authors: Legostaeva, Elena V. | Eroshenko, Anna Yu. | Vavilov, Vladimir P. | Skripnyak, Vladimir A. | Chulkov, Arsenii O. | Kozulin, Alexander A. | Skripnyak, Vladimir V. | Glukhov, Ivan A. | Sharkeev, Yuriy P.
Source: Materials. 2022. Vol. 15, № 23. P. 8480 (1-17)
Type: статьи в журналах
Date: 2022
Description: A comprehensive study was performed of the deformation and temperature behavior during quasi-static tension, as well as the peculiarities of accumulation and dissipation of energy during plastic defor ... More
Add   Development of ultrafine-grained and nanostructured bioinert alloys based on titanium, zirconium and niobium and their microstructure, mechanical and biological properties
Authors: Sharkeev, Yuriy P. | Eroshenko, Anna Yu. | Legostaeva, Elena V. | Kovalevskaya, Zhanna G. | Belyavskaya, Olga A. | Khimich, Margarita A. | Epple, Matthias | Prymak, Oleg | Sokolova, Viktoriya | Zhu, Qifang | Sun, Zeming | Zhang, Hongju
Source: Metals. 2022. Vol. 12, № 7. P. 1136 (1-30)
Type: статьи в журналах
Date: 2022
Description: For this paper, studies of the microstructure as well as the mechanical and biological properties of bioinert titanium, zirconium, and niobium alloys in their nanostructured (NS) and ultrafine-grained ... More
Add   Effect of multistage high temperature thermomechanical treatment on the microstructure and mechanical properties of austenitic reactor steel
Authors: Akkuzin, Sergey A. | Litovchenko, Igor Yu. | Polekhina, Nadezhda A. | Almaeva, Kseniya V. | Kim, Anna | Moskvichev, Evgeny N. | Chernov, Vyacheslav M.
Source: Metals. 2022. Vol. 12, № 1. P. 63 (1-16)
Type: статьи в журналах
Date: 2022
Description: The deformation microstructures formed by novel multistage high-temperature thermomechanical treatment (HTMT) and their effect on the mechanical properties of austenitic reactor steel are investigated ... More
Add   Electronic structure and mechanical properties of Ti5Si3
Authors: Chumakova, Lora S. | Bakulin, Alexander V. | Kulkova, Svetlana E.
Source: Journal of experimental and theoretical physics. 2022. Vol. 134, № 6. P. 743-753
Type: статьи в журналах
Date: 2022
Description: The atomic and electronic structures, the elastic moduli, the vibrational frequencies, and the thermodynamic characteristics of the Ti5Si3 titanium silicide are calculated by the projector augmented w ... More
Add   Electronic structure and mechanical properties of Ti5Si3
Authors: Chumakova, Lora S. | Bakulin, Alexander V. | Kulkova, Svetlana E.
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020050-1-020050-4
Type: статьи в журналах
Date: 2022
Description: The atomic and electronic structures as well as the elastic properties of Ti5Si3 compound have been studied by the projector augmented-waves method within density functional theory. The electron energ ... More
Add   Enhanced mechanical properties and high electrical conductivity of copper alloy via dual-nanoprecipitation
Authors: Zhou, Meng | Geng, Yongfeng | Zhang, Yi | Ban, Yijie | Li, Xu | Jia, Yanlin | Liang, Shengli | Tian, Baohong | Liu, Yong | Volinsky, Alex A.
Source: Materials characterization. 2022. Vol. 195. P. 112494 (1-9)
Type: статьи в журналах
Date: 2022
Description: Copper alloys are widely used as lead frames, electric contact wires and pantographs due to their high electrical conductivity and excellent mechanical properties. At present work, a medium electrical ... More
Add   Improved mechanical properties of porous nitinol by aluminum alloying
Authors: Monogenov, Alexander N. | Marchenko, Ekaterina S. | Baigonakova, Gulsharat A. | Yasenchuk, Yuriy F. | Garin, Alexander S. | Volinsky, Alex A.
Source: Journal of alloys and compounds. 2022. Vol. 918. P. 165617 (1-12)
Type: статьи в журналах
Date: 2022
Description: Aluminum alloying effects (up to 2 at %) on the macrostructure, microstructure, and mechanical properties of porous nitinol (NiTi) obtained by self-propagating high-temperature synthesis (SHS) were st ... More
Add   Improvement of mechanical properties and adhesion of Ti-Al-Si-N coatings by alloying with Ta
Authors: Shugurov, Artur R. | Kuzminov, Evgenii D. | Garanin, Yuriy A. | Panin, Alexey V. | Dmitriev, Andrey I.
Source: Lubricants. 2022. Vol. 10, № 8. P. 178 (1-12)
Type: статьи в журналах
Date: 2022
Description: The effect of the Ta content on the structure, mechanical properties and adhesion of magnetron-sputtered Ti1-x-y-zAlxTaySizN coatings was studied. According to the energy-dispersive X-ray spectroscopy ... More
Add   Influence of tungsten nanoparticles on microstructure and mechanical properties of an Al-5%Mg alloy produced by casting
Authors: Khrustalyov, Anton P. | Kakhidze, Nikolai I. | Platov, Vladimir V. | Zhukov, Ilya A. | Vorozhtsov, Alexander B.
Source: Metals. 2022. Vol. 12, № 6. P. 989 (1-11)
Type: статьи в журналах
Date: 2022
Description: This paper investigates the impact of tungsten nanoparticles on the microstructure and mechanical properties of the Al-5Mg alloy. Tungsten concentrations of up to 0.5 wt.% led to a slight modification ... More
Add   Local deformation behavior of the surface layers of NiTi alloy in instrumented sharp indentation
Authors: Dyachenko, Filipp A. | Atovullaeva, Asiya A. | Meisner, Lyudmila L.
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020057-1-020057-4
Type: статьи в журналах
Date: 2022
Add   Microstructure and mechanical properties of V–Cr–Ta–Zr alloy after combined treatment
Authors: Ditenberg, Ivan A. | Smirnov, Ivan V. | Grinyaev, Konstantin V. | Tyumentsev, Alexander N. | Chernov, Vyacheslav M. | Potapenko, Mikhail M.
Source: Russian physics journal. 2022. Vol. 65, № 3. P. 586-588
Type: статьи в журналах
Date: 2022
Add   Microstructure and mechanical properties of V–Cr–Zr alloy with carbide and oxide strengthening
Authors: Ditenberg, Ivan A. | Smirnov, Ivan V. | Grinyaev, Konstantin V. | Tyumentsev, Alexander N. | Chernov, Vyacheslav M. | Potapenko, Mikhail M.
Source: Materials science and engineering A. 2022. Vol. 843. P. 143159 (1-37)
Type: статьи в журналах
Date: 2022
Description: A comparative study of the effectiveness of carbide and oxide types of strengthening of V–Cr–Zr alloy was carried out by means of a comprehensive certification of structural-phase state parameters and ... More
Add   Microstructure and properties evolution of rolled powder metallurgy Cu-30Fe alloy
Authors: Zhang, Chenzeng | Chen, Cunguang | Li, Pei | Yan, Mengjie | Qin, Qian | Yang, Fang | Wang, Wenwen | Guo, Zhimeng | Volinsky, Alex A.
Source: Journal of alloys and compounds. 2022. Vol. 909. P. 164761 (1-12)
Type: статьи в журналах
Date: 2022
Description: Powder metallurgy Cu-30Fe alloy was prepared by mechanical alloying, pressureless sintering, and rolling processes. The alloy microstructure and physical properties affected by rolling were studied. T ... More
Add   Microstructure, structural-phase transformations, and mechanical properties of low-activation 12% chromium ferritic-martensitic steel EK-181 depending on the treatment conditions
Authors: Polekhina, Nadezhda A. | Litovchenko, Igor Yu. | Almaeva, Kseniya V. | Tyumentsev, Alexander N. | Chernov, Vyacheslav M. | Leontyeva-Smirnova, M. V.
Source: Inorganic materials: applied research. 2022. Vol. 13, № 5. P. 1247-1260
Type: статьи в журналах
Date: 2022

Creator

Subject

Resource Type

^