Электронная библиотека (репозиторий) Томского государственного университета
2021 | Promakhov, Vladimir V.

Add to Quick Collection   All 6 Results

Showing items 1 - 6 of 6.
  • «
  • ←
  • 1
  • →
  • »
Sort:
 Add All Items to Quick Collection
Add   High-temperature synthesis of metal–matrix composites (Ni-Ti)-TiB2
Authors: Promakhov, Vladimir V. | Matveev, Alexey E. | Schulz, Nikita | Grigoriev, Mikhail | Olisov, Andrey | Vorozhtsov, Alexander B. | Zhukov, Alexander S. | Klimenko, Viktor
Source: Applied sciences. 2021. Vol. 11, № 5. P. 2426 (1-11)
Type: статьи в журналах
Date: 2021
Description: Currently, metal–matrix composite materials are some of the most promising types of materials, and they combine the advantages of a metal matrix and reinforcing particles/fibres. Within the framework ... More
Add   Investigation of the dynamic behaviour ceramic matrix composites obtained by additive technologies
Authors: Promakhov, Vladimir V. | Vorozhtsov, Alexander B. | Korobenkov, Maxim V. | Schults, Nikita | Bakhmat, Vladislav | Dronov, Filipp
Source: Materials research express. 2021. Vol. 8, № 2. P. 026503 (1-11)
Type: статьи в журналах
Date: 2021
Description: Additive technologies open up new possibilities for creating materials with controlled structural features including ceramic composites. Such composites have good strength properties, fracture toughne ... More
Add   Researching the properties of samples fabricated using selective laser melting from a high‐temperature nickel‐based alloy
Authors: Mazalov, Alexey | Shmatov, Dmitry | Zelenina, Lydia | Platko, Dmitry | Promakhov, Vladimir V. | Vorozhtsov, Alexander B. | Schulz, Nikita
Source: Applied sciences. 2021. Vol. 11, № 4. P. 1419 (1-10)
Type: статьи в журналах
Date: 2021
Description: A possible application of a metal powder composition made of a high‐temperature nickelbased alloy with high heat strength (the material is analogous to Inconel 718) in selective laser melting (SLM, an ... More
Add   Review of the problems of additive manufacturing of nanostructured high-energy materials
Authors: Kudryashova, Olga B. | Lerner, Marat I. | Vorozhtsov, Alexander B. | Sokolov, Sergei D. | Promakhov, Vladimir V.
Source: Materials. 2021. Vol. 14, № 23. P. 7394 (1-18)
Type: статьи в журналах
Date: 2021
Description: This article dwells upon the additive manufacturing of high-energy materials (HEM) with regards to the problems of this technology’s development. This work is aimed at identifying and describing the m ... More
Add   Synthesis of metal matrix composites based on CrxNiy-TiN for additive technology
Authors: Matveev, Alexey E. | Promakhov, Vladimir V. | Schultz, Nikita | Vorozhtsov, Alexander B.
Source: Materials. 2021. Vol. 14, № 20. P. 5914 (1-11)
Type: статьи в журналах
Date: 2021
Description: The novelty of this work consists of obtaining original fundamental data on the laws of synthesis of new metal matrix composite materials for additive technologies. CrN + TiNi composites were obtained ... More
Add   The influence of electron-beam treatment on the structure of a TiNi powder alloy obtained by calcium-hydride reduction
Authors: Anikeev, Sergey G. | Artyukhova, Nadezhda V. | Kaftaranova, Maria I. | Khodorenko, Valentina N. | Yakovlev, Evgeny V. | Markov, Alexey B. | Promakhov, Vladimir V. | Mamazakirov, Oibek R.
Source: Journal of surface investigation: X-ray, synchrotron and neutron techniques. 2021. Vol. 15, № 5. P. 1067-1071
Type: статьи в журналах
Date: 2021
Description: The study of the influence of electron-beam treatment on the structural features of a TiNi powder alloy obtained by calcium-hydride reduction is carried out. It is found that electron-beam treatment l ... More
  • «
  • ←
  • 1
  • →
  • »

Creator

Subject

^