Add to Quick Collection
All 13 Results
Showing items 1 - 13 of 13.
Add All Items to Quick Collection
Source: Mendeleev communications. 2021. Vol. 31, № 3. P. 382-384
Type: статьи в журналах
Date: 2021
Description:
Samples of zinc-modified hydroxyapatite (HA) Ca(10 – x)Znx(PO4)6(OH)2 with different zinc content (x = 0.1 and 0.5) were synthesized by the liquid-phase method. It was found that the addition of zinc
... More
Source: Vacuum. 2021. Vol. 189. P. 110230 (1-9)
Type: статьи в журналах
Date: 2021
Description:
We report the study of commercially pure titanium (VТ1-0 alloy under Russian classification) in the submicrocrystalline state obtained by the abc-pressing method with the surface modified by the ion i
... More
Source: Inorganic materials: applied research. 2020. Vol. 11, № 3. P. 507-513
Type: статьи в журналах
Date: 2020
Description:
We investigated the surface physicochemical properties of biomedical materials (made from polylactic acid (PLA), hydroxyapatite (HA), and composites based on PLA and HA with the mass ratio of 80/20 an
... More
Source: Journal of functional biomaterials. 2020. Vol. 11, № 1. P. 10 (1-12)
Type: статьи в журналах
Date: 2020
Description:
Hydroxyapatites modified with metal ions are the main inorganic components of bone
Source: Metals. 2020. Vol. 10, № 7. P. 859 (1-17)
Type: статьи в журналах
Date: 2020
Description:
The structural state and the quantitative phase analysis of the TiAl system, alloyed with rareearth
Authors:
Popova, Natalia A. (канд. техн. наук) |
Kalashnikov, Mark P. |
Nikonenko, Elena L. |
Kazantseva, Lydmila A. |
Dement, Taras |
Klopotov, Anatoly A. |
Abzaev, Yuri A. |
Karakchieva, Natalia I. |
Koneva, N. |
Kurzina, Irina A.
Source: Journal of Physics: Conference Series. 2019. Vol. 1145. P. 012051 (1-10)
Type: статьи в журналах
Date: 2019
Description:
Abstract Alloy of the V-Ti-Cr system is a promising material exploited under high radiation and in corrosion environment. We sintered V-4.9Ti-4.8Cr alloy from particles with original average size of 3
... More
Source: Metals. 2018. Vol. 8, № 2. P. 98 (1-10)
Type: статьи в журналах
Date: 2018
Description:
Using scanning and transmission electron microscopy, we studied silicon particles formed during the solidification of Al-7%Si alloy when different modifying mixtures were introduced into the melt: (1)
... More
Source: MATEC Web of conferences. 2018. Vol. 243. P. 00019 (1-5)
Type: статьи в журналах
Date: 2018
Description:
Three-layer materials consisting of the V-4.9Ti-4.8Cr/ferrite steel 17Cr-12Ni-Fe /V-4.9Ti-4.8Cr
Source: International journal of minerals, metallurgy, and materials. 2017. Vol. 24, № 5. P. 523-529
Type: статьи в журналах
Date: 2017
Description:
The effect of TiO2, ZrO2 and Na3AlF6 ultrafine powders on the fine structure and the phase composition of Fe–14Mn–1.2C steel was investigated. The introduction of the ultrafine powders into the melt i
... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 112. P. 012032 (1-6)
Type: статьи в журналах
Date: 2016
Description:
The paper presents TEM analysis of microstructure, phase composition, and mechanical properties of commercially pure titanium. These properties of two types of grains are compared before and after mod
... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 112. P. 012039 (1-5)
Type: статьи в журналах
Date: 2016
Description:
This article deals with a method of obtaining materials in the Ti-Al system. Research was carried out in accordance with the phase diagram of the system state. It was established, that both single-pha
... More
Source: Key engineering materials. 2015. Vol. 670. P. 144-151
Type: статьи в журналах
Date: 2015
Description:
The paper presents results of investigations of α-Ti microhardness modified by aluminum ions having diverse grain sizes, namely: 0.3 μm, 1.5 μm, and 17 μm. These investigations show that the decrease
... More
Source: Advanced Materials Research. 2015. Vol. 1085. P. 260-265
Type: статьи в журналах
Date: 2015
