Add to Quick Collection
All 63 Results
Showing items 1 - 15 of 63.
Add All Items to Quick Collection
Authors:
Tang, Shunlong |
Zhou, Meng |
Zhang, Yi |
Xu, Deye |
Zhang, Zhiyang |
Zheng, Xianhua |
Li, De |
Li, Xu |
Tian, Baohong |
Jia, Yanlin |
Liu, Yong |
Volinsky, Alex A. |
Marchenko, Ekaterina S.
Source: Materials science and engineering A. 2023. Vol. 871. P. 144910 (1-16)
Type: статьи в журналах
Date: 2023
Description:
In this paper, new Cu–Ni–Sn–Ti–Cr and Cu–Ni–Sn–Ti–Cr–Ce alloys were prepared and studied. After solution treatment and 60% cold rolling, the Cu–Ni–Sn–Ti–Cr alloy with micro-hardness of 221 HV, a tensi
... More
Authors:
Legostaeva, Elena V. |
Eroshenko, Anna Yu. |
Vavilov, Vladimir P. |
Skripnyak, Vladimir A. |
Luginin, Nikita |
Chulkov, Arsenii O. |
Kozulin, Alexander A. |
Skripnyak, Vladimir V. |
Schmidt, Juergen |
Tolmachev, Alexey I. |
Uvarkin, Pavel V. |
Sharkeev, Yuriy P.
Source: Metals. 2023. Vol. 13, № 5. P. 988 (1-17)
Type: статьи в журналах
Date: 2023
Description:
The microstructural investigation, mechanical properties, and accumulation and dissipation of energies of the magnesium alloy Mg-2.9Y-1.3Nd in the recrystallized state and after severe plastic deforma
... More
Source: Materials. 2022. Vol. 15, № 23. P. 8480 (1-17)
Type: статьи в журналах
Date: 2022
Description:
A comprehensive study was performed of the deformation and temperature behavior during quasi-static tension, as well as the peculiarities of accumulation and dissipation of energy during plastic defor
... More
Authors:
Sharkeev, Yuriy P. |
Eroshenko, Anna Yu. |
Legostaeva, Elena V. |
Kovalevskaya, Zhanna G. |
Belyavskaya, Olga A. |
Khimich, Margarita A. |
Epple, Matthias |
Prymak, Oleg |
Sokolova, Viktoriya |
Zhu, Qifang |
Sun, Zeming |
Zhang, Hongju
Source: Metals. 2022. Vol. 12, № 7. P. 1136 (1-30)
Type: статьи в журналах
Date: 2022
Description:
For this paper, studies of the microstructure as well as the mechanical and biological properties of bioinert titanium, zirconium, and niobium alloys in their nanostructured (NS) and ultrafine-grained
... More
Source: Journal of alloys and compounds. 2022. Vol. 918. P. 165617 (1-12)
Type: статьи в журналах
Date: 2022
Description:
Aluminum alloying effects (up to 2 at %) on the macrostructure, microstructure, and mechanical properties of porous nitinol (NiTi) obtained by self-propagating high-temperature synthesis (SHS) were st
... More
Source: Metals. 2022. Vol. 12, № 6. P. 989 (1-11)
Type: статьи в журналах
Date: 2022
Description:
This paper investigates the impact of tungsten nanoparticles on the microstructure and mechanical properties of the Al-5Mg alloy. Tungsten concentrations of up to 0.5 wt.% led to a slight modification
... More
Source: Russian physics journal. 2022. Vol. 65, № 3. P. 586-588
Type: статьи в журналах
Date: 2022
Source: Materials science and engineering A. 2022. Vol. 843. P. 143159 (1-37)
Type: статьи в журналах
Date: 2022
Description:
A comparative study of the effectiveness of carbide and oxide types of strengthening of V–Cr–Zr alloy was carried out by means of a comprehensive certification of structural-phase state parameters and
... More
Source: Journal of alloys and compounds. 2022. Vol. 909. P. 164761 (1-12)
Type: статьи в журналах
Date: 2022
Description:
Powder metallurgy Cu-30Fe alloy was prepared by mechanical alloying, pressureless sintering, and rolling processes. The alloy microstructure and physical properties affected by rolling were studied. T
... More
Source: Inorganic materials: applied research. 2022. Vol. 13, № 5. P. 1247-1260
Type: статьи в журналах
Date: 2022
Authors:
Polekhina, Nadezhda A. |
Linnik, Valeria V. |
Litovchenko, Igor Yu. |
Almaeva, Kseniya V. |
Akkuzin, Sergey A. |
Moskvichev, Evgeny N. |
Chernov, Vyacheslav M. |
Leontyeva-Smirnova, Mariya V. |
Degtyarev, Nikolay A. |
Moroz, Kirill A.
Source: Metals. 2022. Vol. 12, № 11. P. 1928 (1-20)
Type: статьи в журналах
Date: 2022
Description:
In this work, we study the effect of high-temperature thermomechanical treatment (HTMT) with deformation in the austenite region on the microstructure, tensile properties, impact toughness, and fractu
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020179-1-020179-4
Type: статьи в журналах
Date: 2022
Description:
The results of studying the microstructure and mechanical properties of the V-W-Cr alloy after different regimes of thermomechanical treatment are presented. It is shown that the use of the modified r
... More
Source: Физическая мезомеханика материалов. Физические принципы формирования многоуровневой структуры и механизмы нелинейного поведения : международная конференция, 5-8 сентября 2022 г., Томск, Россия : тезисы докладов. Новосибирск, 2022. С. 189-190
Type: статьи в сборниках
Date: 2022
Source: Материалы XI Всероссийской научной конференции с международным участием "Актуальные проблемы современной механики сплошных сред и небесной механики – 2021", г. Томск, 17-21 ноября 2021 г.. Томск, 2022. С. 137-142
Type: статьи в сборниках
Date: 2022
Description:
В работе рассматривается получение и исследование магниевого сплава Mg– Ca–Zn, упрочненного наночастицами алмаза, введенных в составе лигатуры, полученной методом ударно-волнового компактирования. Вве
... More
Source: Материалы XI Всероссийской научной конференции с международным участием "Актуальные проблемы современной механики сплошных сред и небесной механики – 2021", г. Томск, 17-21 ноября 2021 г.. Томск, 2022. С. 192-196
Type: статьи в сборниках
Date: 2022
Description:
В настоящей работе исследуются алюминиево-магниевые сплавы марки АМг5, содержащие наночастицы W. Приведены результаты измерения твердости и микротвердости исследуемых сплавов. Проведен анализ влияния
... More