Add to Quick Collection
All 11 Results
Showing items 1 - 11 of 11.
Add All Items to Quick Collection
Source: Advanced powder technology. 2022. Vol. 33, № 1. P. 103332 (1-12)
Type: статьи в журналах
Date: 2022
Description:
Despite widespread use of liquid process control agents (PCA) during material processing via high-energy ball milling, their effect on the properties of the milled powders has not been quantified or u
... More
Source: Energy and fuels. 2021. Vol. 35, № 12. P. 10327-10338
Type: статьи в журналах
Date: 2021
Description:
Mixed oxide powders of Bi2O3 and CuO were prepared by mechanical milling as well as calcination of mixed nitrates. Arrested reactive milling was used to prepare boron-rich thermite composite powders w
... More
Source: Materialia. 2021. Vol. 15. P. 100959 (1-8)
Type: статьи в журналах
Date: 2021
Description:
Mechanical milling of aluminum powders with two immiscible liquids, acetonitrile and hexane, produced roughly spherical aluminum particles with increased flowability and sizes in the range of tens to
... More
Source: Powder Technology. 2021. Vol. 388. P. 41-50
Type: статьи в журналах
Date: 2021
Description:
Spherical boron powders with sizes ranging from4 to 100 μmwere prepared by ballmilling a commercial boron powder. A planetary mill was used with a process control agent consisting of two immiscible fl
... More
Source: Powder Technology. 2020. Vol. 359. P. 238-246
Type: статьи в журналах
Date: 2020
Description:
The effect of polar and nonpolar liquid process control agents (PCA) on properties of metal rich Al/CuO thermites prepared by Arrested Reactive Milling was studied. Acetonitrile and hexane, and their
... More
Source: Combustion and flame. 2020. Vol. 215. P. 78-85
Type: статьи в журналах
Date: 2020
Description:
Composite powders combining boron with BiF3 and Bi in different amounts were prepared by high energy milling. Thermal analysis in an argon-oxygen mixture showed significant oxidation starting about 20
... More
Source: Combustion and flame. 2020. Vol. 214. P. 57-64
Type: статьи в журналах
Date: 2020
Description:
Thermite powders with molar composition 8Al·3CuO were prepared in two stages by Arrested Reactive Milling (ARM). In the first stage, the starting materials Al and CuO were milled separately in acetoni
... More
Source: Defence technology. 2019. Vol. 15, № 1. P. 1-22
Type: статьи в журналах
Date: 2019
Description:
Fluorine containing oxidizers, primarily polymers, are extensively used in pyrotechnic compositions. Fluorinated oxidizers are less explored for metalized propellants and explosives despite a potentia
... More
Source: The Journal of Physical Chemistry C. 2019. Vol. 123, № 18. P. 11807-11813
Type: статьи в журналах
Date: 2019
Description:
An approach suitable for quantitative description of oxidation of porous powders with complex particle morphology is developed and applied for a 95% pure boron powder. It is shown that boron particles
... More
Source: Journal of materials science. 2018. Vol. 53, № 2. P. 1178-1190
Type: статьи в журналах
Date: 2018
Description:
Reactive Al–Ni composites are of interest for combustion synthesis, for joining, and as components of energetic formulations. Mechanical milling is one of the most practical techniques used for their
... More
Source: Journal of alloys and compounds. 2018. Vol. 735. P. 1863-1870
Type: статьи в журналах
Date: 2018
Description:
Materials capable of armor penetration and prompt chemical energy release are desired for future weapon systems in order to better couple the kinetic energy of a projectile to its target. High-density
... More
