Add to Quick Collection
All 35 Results
Showing items 16 - 30 of 35.
Add All Items to Quick Collection
Source: Известия высших учебных заведений. Физика. 2022. Т. 65, № 3. С. 179-180
Type: статьи в журналах
Date: 2022
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020107-1-020107-4
Type: статьи в журналах
Date: 2022
Source: Материалы XI Всероссийской научной конференции с международным участием "Актуальные проблемы современной механики сплошных сред и небесной механики – 2021", г. Томск, 17-21 ноября 2021 г.. Томск, 2022. С. 353-356
Type: статьи в сборниках
Date: 2022
Description:
В данной работе было рассмотрено исследование влияния наноразмерных частиц алмаза, полученных методом детонационного синтеза, на структуру и механические свойства магниевого сплава Mg-Ca-Zn для медици
... More
Source: Материалы XI Всероссийской научной конференции с международным участием "Актуальные проблемы современной механики сплошных сред и небесной механики – 2021", г. Томск, 17-21 ноября 2021 г.. Томск, 2022. С. 192-196
Type: статьи в сборниках
Date: 2022
Description:
В настоящей работе исследуются алюминиево-магниевые сплавы марки АМг5, содержащие наночастицы W. Приведены результаты измерения твердости и микротвердости исследуемых сплавов. Проведен анализ влияния
... More
Source: Nanoscience and technology : an international journal. 2022. Vol. 13, № 2. P. 15-22
Type: статьи в журналах
Date: 2022
Source: Defect and diffusion forum. 2022. Vol. 419. P. 103-108
Type: статьи в журналах
Date: 2022
Description:
Stress-strain behavior of austenitic stainless steel grade AISI 304 was investigated by means of uniaxial tensile tests and magneto-phase analysis. The test materials were strained in tension within t
... More
Authors:
Sharkeev, Yuriy P. |
Eroshenko, Anna Yu. |
Legostaeva, Elena V. |
Kovalevskaya, Zhanna G. |
Belyavskaya, Olga A. |
Khimich, Margarita A. |
Epple, Matthias |
Prymak, Oleg |
Sokolova, Viktoriya |
Zhu, Qifang |
Sun, Zeming |
Zhang, Hongju
Source: Metals. 2022. Vol. 12, № 7. P. 1136 (1-30)
Type: статьи в журналах
Date: 2022
Description:
For this paper, studies of the microstructure as well as the mechanical and biological properties of bioinert titanium, zirconium, and niobium alloys in their nanostructured (NS) and ultrafine-grained
... More
Source: Behavior of materials under impact, explosion, high pressures and dynamic strain rates. Cham, 2022. P. 69-82
Type: статьи в сборниках
Date: 2022
Description:
This paper presents the results of research on superhard coatings obtained by the interaction of high-speed powder clouds with a titanium substrate. High-speed powder clouds were obtained under condit
... More
Source: Физическая мезомеханика материалов. Физические принципы формирования многоуровневой структуры и механизмы нелинейного поведения : международная конференция, 5-8 сентября 2022 г., Томск, Россия : тезисы докладов. Новосибирск, 2022. С. 189-190
Type: статьи в сборниках
Date: 2022
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020050-1-020050-4
Type: статьи в журналах
Date: 2022
Description:
The atomic and electronic structures as well as the elastic properties of Ti5Si3 compound have been studied by the projector augmented-waves method within density functional theory. The electron energ
... More
Source: Russian physics journal. 2022. Vol. 65, № 3. P. 586-588
Type: статьи в журналах
Date: 2022
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020011-1-020011-4
Type: статьи в журналах
Date: 2022
Description:
The effect of warm deformation on the microstructure and mechanical properties of cold-deformed AISI 316 type austenitic steel is investigated. It is shown that cold deformation with a strain degree o
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020179-1-020179-4
Type: статьи в журналах
Date: 2022
Description:
The results of studying the microstructure and mechanical properties of the V-W-Cr alloy after different regimes of thermomechanical treatment are presented. It is shown that the use of the modified r
... More
Source: Цветные металлы. 2022. № 3. С. 24-32
Type: статьи в журналах
Date: 2022
Description:
Внедрение в промышленность конструкционных материалов, сочетающих высокую прочность и низкий удельный вес, обеспечивает повышение энергетической эффективности машин и оборудования. Деталь из алюминия
... More
Source: Journal of alloys and compounds. 2022. Vol. 909. P. 164761 (1-12)
Type: статьи в журналах
Date: 2022
Description:
Powder metallurgy Cu-30Fe alloy was prepared by mechanical alloying, pressureless sintering, and rolling processes. The alloy microstructure and physical properties affected by rolling were studied. T
... More