Add to Quick Collection
All 81 Results
Showing items 1 - 15 of 81.
Add All Items to Quick Collection
Source: Metals. 2019. Vol. 9, № 1. P. 65 (1-10)
Type: статьи в журналах
Date: 2019
Description:
It has been found that a high electrical conductivity of 63.1%, the International Annealed Copper Standard (IACS), and high mechanical properties are achieved by the initial aluminum alloy after under
... More
Source: Materials. 2022. Vol. 15, № 23. P. 8450 (1-28)
Type: статьи в журналах
Date: 2022
Description:
It is known that the presence of oxygen phases in hard materials leads to an undesirable decrease in the mechanical properties. In materials based on AlMgB14, the main oxygen impurity is spinel MgAl2O
... More
Source: Metals. 2022. Vol. 12, № 2. P. 277 (1-13)
Type: статьи в журналах
Date: 2022
Description:
In this work, magnesium-based composites were obtained by shock-wave compaction of a powder mixture of Mg-5 wt.% AlN at a shock-wave pressure of 2 GPa. Their microstructure was investigated and the ph
... More
Source: Nanomaterials. 2023. Vol. 13, № 10. P. 1589 (1-12)
Type: статьи в журналах
Date: 2023
Description:
This paper presents the results of studies on AlMgB14-based ceramic coatings deposited on WC-Co hard alloy substrates using RF plasma sputtering. The aim of this work is to study the structure, phase
... More
Source: Materials. 2022. Vol. 15, № 15. P. 5327 (1-12)
Type: статьи в журналах
Date: 2022
Description:
This article considers issues pertinent to the research of the phase composition, structure and mechanical properties of materials obtained from powders of composite (Ni-Ti)-TiB2, which have prospecti
... More
Source: Applied sciences. 2021. Vol. 11, № 4. P. 1419 (1-10)
Type: статьи в журналах
Date: 2021
Description:
A possible application of a metal powder composition made of a high‐temperature nickelbased alloy with high heat strength (the material is analogous to Inconel 718) in selective laser melting (SLM, an
... More
Source: Metals. 2022. Vol. 12, № 6. P. 989 (1-11)
Type: статьи в журналах
Date: 2022
Description:
This paper investigates the impact of tungsten nanoparticles on the microstructure and mechanical properties of the Al-5Mg alloy. Tungsten concentrations of up to 0.5 wt.% led to a slight modification
... More
Source: Materials today communications. 2020. Vol. 22. P. 100848 (1-7)
Type: статьи в журналах
Date: 2020
Description:
In this work, AlMgB14-based materials were obtained from powders of the intermetallic compound Al12Mg17 and boron using hot pressing method and mechanical treatment with a planetary mill. The method f
... More
Source: Metals. 2023. Vol. 13, № 6. P. 1028 (1-23)
Type: статьи в журналах
Date: 2023
Description:
This paper studies the plastic deformation of a rotating disk made of aluminum dispersion-hardened alloys using mechanical tensile tests and a structured study using optical microscopy methods. Alloys
... More
Source: Metals. 2022. Vol. 12, № 3. P. 525 (1-10)
Type: статьи в журналах
Date: 2022
Description:
This research work studies the structural phase parameters and physicomechanical properties of metal-matrix composite materials based on a Ni–TiB2 system obtained by additive manufacturing (specifical
... More
Source: Nanomaterials. 2022. Vol. 12, № 21. P. 3805 (1-9)
Type: статьи в журналах
Date: 2022
Description:
In this work, the structure, phase composition, hardness and tensile strength of the AlMgB14-based material obtained by spark plasma sintering (SPS) were investigated. According to the XRD results, th
... More
Source: Nanomaterials. 2022. Vol. 12, № 11. P. 1895 (1-10)
Type: статьи в журналах
Date: 2022
Description:
In this work, composite materials were obtained by spark plasma sintering of an Al12Mg17-B-Si powder mixture. The structure, phase composition, and mechanical properties of the obtained composites wer
... More
Source: Metals. 2023. Vol. 13, № 3. P. 477 (1-9)
Type: статьи в журналах
Date: 2023
Description:
The Hugoniot elastic limit and spall strength were measured for a heat-resistant metalmatrix composite Inconel 625–5%NiTi–TiB2 alloy additive manufactured (AM) by direct laser deposition. The strength
... More
Source: Metals. 2021. Vol. 11, № 2. P. 279 (1-20)
Type: статьи в журналах
Date: 2021
Description:
An experimental and theoretical investigation of the strength properties of aluminum alloys strengthened by dispersed nanoparticles, as well as the determination of the significance of various mechani
... More
Source: AIP Conference Proceedings. 2016. Vol. 1772. P. 030003-1-030003-6
Type: статьи в журналах
Date: 2016
Description:
The paper presents a uniquely designed device that enables controlled manufacturing of semi-fabricated products from thermoplastic ceramic suspensions by fused deposition modeling. Sintering of the pr
... More
