Электронная библиотека (репозиторий) Томского государственного университета
микроструктура

Add to Quick Collection   All 40 Results

Showing items 1 - 15 of 40.
Sort:
 Add All Items to Quick Collection
Add   Characterization of the anodic film and corrosion resistance of an A535 aluminum alloy after intermetallics removal by different etching time
Authors: Chankitmunkong, Suwaree | Eskin, Dmitry G. | Limmaneevichitr, Chaowalit | Kengkla, Nattarat | Diewwanit, Onnjira
Source: Metals. 2022. Vol. 12, № 7. P. 1140 (1-19)
Type: статьи в журналах
Date: 2022
Description: The objective of this study was to improve the corrosion resistance of an A535 alloy by removing intermetallics on the alloy surface by alkaline etching to improve the morphologies and properties of t ... More
Add   Comparative investigation of the influence of ultrafine-grained state on deformation and temperature behavior and microstructure formed during quasi-static tension of pure titanium and Ti-45Nb alloy by means of infrared thermography
Authors: Legostaeva, Elena V. | Eroshenko, Anna Yu. | Vavilov, Vladimir P. | Skripnyak, Vladimir A. | Chulkov, Arsenii O. | Kozulin, Alexander A. | Skripnyak, Vladimir V. | Glukhov, Ivan A. | Sharkeev, Yuriy P.
Source: Materials. 2022. Vol. 15, № 23. P. 8480 (1-17)
Type: статьи в журналах
Date: 2022
Description: A comprehensive study was performed of the deformation and temperature behavior during quasi-static tension, as well as the peculiarities of accumulation and dissipation of energy during plastic defor ... More
Add   Development of ultrafine-grained and nanostructured bioinert alloys based on titanium, zirconium and niobium and their microstructure, mechanical and biological properties
Authors: Sharkeev, Yuriy P. | Eroshenko, Anna Yu. | Legostaeva, Elena V. | Kovalevskaya, Zhanna G. | Belyavskaya, Olga A. | Khimich, Margarita A. | Epple, Matthias | Prymak, Oleg | Sokolova, Viktoriya | Zhu, Qifang | Sun, Zeming | Zhang, Hongju
Source: Metals. 2022. Vol. 12, № 7. P. 1136 (1-30)
Type: статьи в журналах
Date: 2022
Description: For this paper, studies of the microstructure as well as the mechanical and biological properties of bioinert titanium, zirconium, and niobium alloys in their nanostructured (NS) and ultrafine-grained ... More
Add   Fabrication of promising Cu-Al-Ni alloys by electron-beam additive manufacturing
Authors: Moskvichev, Evgeny N. | Smolin, Alexey Yu. | Shamarin, Nikolay N.
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020136-1-020136-4
Type: статьи в журналах
Date: 2022
Description: The samples of the promising Cu-Al-Ni alloys were fabricated by electron-beam additive printing and studied by electron microscopy. The fabrication was carried out using the combined powder feed and w ... More
Add   Improved mechanical properties of porous nitinol by aluminum alloying
Authors: Monogenov, Alexander N. | Marchenko, Ekaterina S. | Baigonakova, Gulsharat A. | Yasenchuk, Yuriy F. | Garin, Alexander S. | Volinsky, Alex A.
Source: Journal of alloys and compounds. 2022. Vol. 918. P. 165617 (1-12)
Type: статьи в журналах
Date: 2022
Description: Aluminum alloying effects (up to 2 at %) on the macrostructure, microstructure, and mechanical properties of porous nitinol (NiTi) obtained by self-propagating high-temperature synthesis (SHS) were st ... More
Add   Influence of tungsten nanoparticles on microstructure and mechanical properties of an Al-5%Mg alloy produced by casting
Authors: Khrustalyov, Anton P. | Kakhidze, Nikolai I. | Platov, Vladimir V. | Zhukov, Ilya A. | Vorozhtsov, Alexander B.
Source: Metals. 2022. Vol. 12, № 6. P. 989 (1-11)
Type: статьи в журналах
Date: 2022
Description: This paper investigates the impact of tungsten nanoparticles on the microstructure and mechanical properties of the Al-5Mg alloy. Tungsten concentrations of up to 0.5 wt.% led to a slight modification ... More
Add   Magnesia cement in the MgO-CO2-H2O system
Authors: Mitina, Natalia N. | Revva, Inna B. | Mitina, Anna
Source: Magazine of civil engineering. 2022. № 5. P. 11311 [1-9]
Type: статьи в журналах
Date: 2022
Description: A detailed study of the MgO-CO2-H2O system allows creating new inorganic binders. The present research is focused on the process of structure formation during hydration and curing of magnesia composit ... More
Add   Microstructure and elemental composition of UMAO calcium phosphate coatings
Authors: Kazantseva, Ekaterina A. | Komarova, Ekaterina G.
Source: Procedia structural integrity. 2022. Vol. 40. P. 207-213
Type: статьи в журналах
Date: 2022
Add   Microstructure and mechanical properties of V–Cr–Ta–Zr alloy after combined treatment
Authors: Ditenberg, Ivan A. | Smirnov, Ivan V. | Grinyaev, Konstantin V. | Tyumentsev, Alexander N. | Chernov, Vyacheslav M. | Potapenko, Mikhail M.
Source: Russian physics journal. 2022. Vol. 65, № 3. P. 586-588
Type: статьи в журналах
Date: 2022
Add   Microstructure and mechanical properties of V–Cr–Zr alloy with carbide and oxide strengthening
Authors: Ditenberg, Ivan A. | Smirnov, Ivan V. | Grinyaev, Konstantin V. | Tyumentsev, Alexander N. | Chernov, Vyacheslav M. | Potapenko, Mikhail M.
Source: Materials science and engineering A. 2022. Vol. 843. P. 143159 (1-37)
Type: статьи в журналах
Date: 2022
Description: A comparative study of the effectiveness of carbide and oxide types of strengthening of V–Cr–Zr alloy was carried out by means of a comprehensive certification of structural-phase state parameters and ... More
Add   Microstructure and properties evolution of rolled powder metallurgy Cu-30Fe alloy
Authors: Zhang, Chenzeng | Chen, Cunguang | Li, Pei | Yan, Mengjie | Qin, Qian | Yang, Fang | Wang, Wenwen | Guo, Zhimeng | Volinsky, Alex A.
Source: Journal of alloys and compounds. 2022. Vol. 909. P. 164761 (1-12)
Type: статьи в журналах
Date: 2022
Description: Powder metallurgy Cu-30Fe alloy was prepared by mechanical alloying, pressureless sintering, and rolling processes. The alloy microstructure and physical properties affected by rolling were studied. T ... More
Add   Microstructure and properties of a nanostructured W-31 wt% Cu composite produced by magnetic pulse compaction of bimetallic nanoparticles
Authors: Pervikov, Alexander V. | Filippov, Andrey V. | Mironov, Yuri P. | Kalashnikov, Mark P. | Krinitcyn, Maksim G. | Eskin, Dmitry G. | Lerner, Marat I. | Tarasov, Sergey Yu.
Source: International journal of refractory metals and hard materials. 2022. Vol. 103. P. 105735 (1-11)
Type: статьи в журналах
Date: 2022
Description: Nanostructured W-31wt.%Cu composite was for the first time produced via magnetic pulse compaction from bimetallic particles obtained using electric explosion of intertwisted copper/tungsten wires in a ... More
Add   Microstructure, phase composition and hardness of Ti–Au cladding deposited on Ti–6Al–4V substrate by electron beam powder bed fusion method
Authors: Klimenov, Vasiliy A. | Slobodyan, Mikhail | Fedorov, Vasiliy V. | Strelkova, Irina | Klopotov, Anatoly A. | Khimich, Margarita A. | Matrenin, Sergey | Semeykina, Darya
Source: Vacuum. 2022. Vol. 203. P. 111289 (1-9)
Type: статьи в журналах
Date: 2022
Description: In this study, a Ti-Au cladding was deposited on a substrate from the Ti-6Al-4V alloy by the electron beam powder bed fusion method in a vacuum. The main goal was to assess the possibility of using ti ... More
Add   Microstructure, structural-phase transformations, and mechanical properties of low-activation 12% chromium ferritic-martensitic steel EK-181 depending on the treatment conditions
Authors: Polekhina, Nadezhda A. | Litovchenko, Igor Yu. | Almaeva, Kseniya V. | Tyumentsev, Alexander N. | Chernov, Vyacheslav M. | Leontyeva-Smirnova, M. V.
Source: Inorganic materials: applied research. 2022. Vol. 13, № 5. P. 1247-1260
Type: статьи в журналах
Date: 2022
Add   On the impact of additive manufacturing processes on the microstructure and magnetic properties of Co–Ni–Ga shape memory Heusler alloys
Authors: Scheibel, Franziska | Lauhoff, Christian | Riegg, Stefan | Krooß, Philipp | Bruder, Enrico | Adabifiroozjaei, Esmaeil | Molina-Luna, Leopoldo | Böhm, Stefan | Chumlyakov, Yuri I. | Niendorf, Thomas | Gutfleisch, Oliver
Source: Advanced engineering materials. 2022. Vol. 24, № 10. P. 2200069 (1-11)
Type: статьи в журналах
Date: 2022
Description: Microstructure design allows to prevent intergranular cracking and premature failure in Co–Ni–Ga shape memory alloys. Favorable grain boundary configurations are established using additive manufacturi ... More

Creator

Subject

Resource Type

^