Influence of PCM heat sink shape on cooling of heat-generating elements in electronics

doi:10.1016/j.applthermaleng.2022.118695

Эндаумент фонд ТГУ!
Впиши своё имя в историю университета
- Сделать пожертвование -

естественная конвекция | 2022

Add to "Quick Collection"

Description	Size	Format
Influence of PCM heat sink shape on cooling of heat-generating elements in electronics	14 MB	Adobe Acrobat PDF	Read	Download
DOI Доступ к ресурсу на сайте издателя			10.1016/j.applthermaleng.2022.118695

#материалы с фазовым переходом

#естественная конвекция

#радиаторы

Title: Influence of PCM heat sink shape on cooling of heat-generating elements in electronics
Creator: Bondareva, Nadezhda S.
|
Sheremet, Mikhail A.
Date: 2022
DOI: 10.1016/j.applthermaleng.2022.118695
Description: The use of phase change materials in modern electronic technologies expands the range of problems of heat and mass transfer in systems with phase transitions. One of these tasks is the cooling of electronic units by the PCM heat sinks. Studying the effectiveness of PCM based systems is one of the most relevant topics in passive cooling. From the point of view of heat and mass transfer modeling, such systems are complex and, as a rule, are studied experimentally. The present numerical study is devoted to the impact of the geometric configuration of a copper profile on the phase change of lauric acid in the presence of volumetric heat generation element. Several profile models have been considered to increase the effective thermal conductivity of the system, including horizontal flat fins, vertical flat fins, and a profile divided into cells by vertical and horizontal plate fins, each cell is filled with the same volume of lauric acid. It should be noted that such analysis allows understanding the influence of vertical and horizontal orientations of fins on heat transfer enhancement within the heat sink. Moreover, a presence of a heater of constant volumetric heat generation illustrates features of heat removal from such an element. To obtain the most accurate solution, the equations of conjugate natural convection are formulated with the melting/solidification processes employing the non-primitive variables like stream function and vorticity. The finite difference technique is applied in modeling the thermohydrodynamic processes with phase transitions. The impact of the profile shape on the development of convective energy transport and phase transitions is analyzed. The novelty of the present study can be described by the following results. It has been shown that vertical plate fins promote faster thermal dissipation than horizontal fins within the metal structure, however, during phase transformations in cavities, the area enhancement ratio of the heat sink becomes the most important. A large number of cells increases the effective heat capacity of the system and reduces its temperature difference.

Relationships: Show Relationship Browser for this Object
collection(s): Механико-математический факультет
Identifier: смотреть в электронном каталоге НБ ТГУ
Type: статьи в журналах
Source: Applied thermal engineering. 2022. Vol. 213. P. 118695 (1-12)
Language: eng

Created: 02-03-2023

587 Visitors

404 Hits

198 Downloads

Механико-математический факультет Influence of PCM heat sink shape on cooling of heat-generating elements in electronics