Influence of As+ Ion implantation on properties of MBE HgCdTe near-surface layer characterized by metal–insulator–semiconductor techniques

doi:10.1007/s11664-021-08752-8

Эндаумент фонд ТГУ!
Впиши своё имя в историю университета
- Сделать пожертвование -

Add to "Quick Collection"

Description	Size	Format
Influence of As+ Ion implantation on properties of MBE HgCdTe near-surface layer characterized by metal–insulator–semiconductor techniques	2 MB	Adobe Acrobat PDF	Read	Download
DOI Доступ к ресурсу на сайте издателя			10.1007/s11664-021-08752-8

#теллурид кадмия-ртути

#молекулярно-лучевая эпитаксия

Title: Influence of As+ Ion implantation on properties of MBE HgCdTe near-surface layer characterized by metal–insulator–semiconductor techniques
Creator: Voytsekhovskiy, Alexander V.
|
Nesmelov, Sergey N.
|
Dzyadukh, Stanislav M.
|
Varavin, Vasilii S.
|
Dvoretsky, Sergei A.
|
Mikhailov, Nikolay N.
|
Sidorov, Georgiy Yu.
|
Yakushev, Maxim V.
|
Marin, Denis V.
Date: 2021
DOI: 10.1007/s11664-021-08752-8
Description: The effect of As+ ion implantation on the electrical properties of the near-surface layer of n-HgCdTe films grown by molecular beam epitaxy (MBE) on Si (310) substrates was experimentally studied. A specific feature of MBE n-Hg0.78Cd0.22Te films is the presence of near-surface graded-gap layers with a high CdTe content, formed during epitaxial growth. The properties of as-grown films and films after As+ ion implantation with ion energy of 200 keV and fluence of 1014 cm−2 were studied. Post-implantation activation annealing was not performed. Test metal–insulator–semiconductor (MIS) structures were created based on as-grown and as-implanted samples by plasma-enhanced atomic layer deposition of Al2O3 insulator films. The admittance of the fabricated MIS structures was measured over a wide range of frequencies and temperatures. When determining the parameters of MIS structures, we used techniques that take into account the presence of near-surface graded-gap layers and series resistance of the HgCdTe film bulk, as well as the high density of slow surface states. It was found that, in as-implanted samples, the donor center concentration in the near-surface layer exceeds 1017 cm−3 and increases with distance from the HgCdTe-Al2O3 interface (at least up to 90 nm). After implantation, the conductivity of MBE HgCdTe film bulk increases markedly. It was shown that, for as-implanted samples, the generation rate of minority charge carriers in the MBE HgCdTe surface layer is significantly reduced, which indicates the appearance of a low defect layer with a thickness of at least 90 nm.

Relationships: Show Relationship Browser for this Object
collection(s): Радиофизический факультет
Identifier: смотреть в электронном каталоге НБ ТГУ
Type: статьи в журналах
Source: Journal of electronic materials. 2021. Vol. 50, № 4. P. 2323-2330
Language: eng

Created: 04-05-2022

12250 Visitors

12165 Hits

209 Downloads

Радиофизический факультет Influence of As+ Ion implantation on properties of MBE HgCdTe near-surface layer characterized by metal–insulator–semiconductor techniques