Add to Quick Collection
All 69 Results
Showing items 1 - 15 of 69.
Add All Items to Quick Collection
Source: Molecules. 2023. Vol. 28, № 1. P. 424 (1-14)
Type: статьи в журналах
Date: 2023
Description:
The article considered the solution of the inverse problem of chemical kinetics of the analysis of experimental data of a thermogravimetric experiment at a constant sample heating rate. The fitting me
... More
Source: Metals. 2023. Vol. 13, № 6. P. 1028 (1-23)
Type: статьи в журналах
Date: 2023
Description:
This paper studies the plastic deformation of a rotating disk made of aluminum dispersion-hardened alloys using mechanical tensile tests and a structured study using optical microscopy methods. Alloys
... More
Source: Materials. 2023. Vol. 16, № 16. P. 5701 (1-11)
Type: статьи в журналах
Date: 2023
Description:
When developing neutralization systems for harmful agents, it is necessary to understand the mechanisms of the formation and evolution of an aerosol cloud in a closed or open space. Effective decontam
... More
Authors:
Marchenko, Ekaterina S. |
Baigonakova, Gulsharat A. |
Khrustalev, Anton P. |
Zhukov, Ilya A. |
Vorozhtsov, Alexander B. |
Chekalkin, Timofey L. |
Monogenov, Alexander N. |
Garin, Alexander S. |
Kim, Tae-Woo |
Kang, Seung-Baik
Source: Materials Chemistry and Physics. 2023. Vol. 295. P. 126959 (1-9)
Type: статьи в журналах
Date: 2023
Description:
This work aims to study microstructural features, phase composition, topology, surface potential, and the biodegradation performance of Mg–4Zn–1Ca-based alloys whose melts were ultrasonically (US) tre
... More
Source: Metals. 2023. Vol. 13, № 3. P. 477 (1-9)
Type: статьи в журналах
Date: 2023
Description:
The Hugoniot elastic limit and spall strength were measured for a heat-resistant metalmatrix composite Inconel 625–5%NiTi–TiB2 alloy additive manufactured (AM) by direct laser deposition. The strength
... More
Source: Physica scripta. 2023. Vol. 98, № 2. P. 025703
Type: статьи в журналах
Date: 2023
Description:
AlMgB14 materials were obtained by hot-pressing of the prereacted AlMgB14 powder. The phase composition, structure, hardness and flexural strength have been studied. The XRD studies shown that the pha
... More
Source: Nanomaterials. 2023. Vol. 13, № 10. P. 1589 (1-12)
Type: статьи в журналах
Date: 2023
Description:
This paper presents the results of studies on AlMgB14-based ceramic coatings deposited on WC-Co hard alloy substrates using RF plasma sputtering. The aim of this work is to study the structure, phase
... More
Source: Vacuum. 2023. Vol. 207. P. 111630 (1-8)
Type: статьи в журналах
Date: 2023
Description:
The study addresses the control of the biodegradation rate of the magnesium–zinc–calcium (Mg–Ca–Zn) alloy, and improvement of its biocorrosion resistance and cytocompatibility using titanium nitride (
... More
Source: Metals. 2023. Vol. 13, № 5. P. 846 (1-14)
Type: статьи в журналах
Date: 2023
Description:
This work studies the phase composition, structure and mechanical properties of composite materials obtained by high-temperature vacuum sintering of SHS-fabricated CrNi–TiN powders synthesized in semi
... More
Source: Metals. 2022. Vol. 12, № 10. P. 1737 (1-12)
Type: статьи в журналах
Date: 2022
Description:
In the presented research work, 3D materials were fabricated by additive moulding by means of extrusion of a mixture of high filled polymers and nanopowders of Ti-Al intermetallides with subsequent si
... More
Source: Metals. 2022. Vol. 12, № 10. P. 1603 (1-15)
Type: статьи в журналах
Date: 2022
Description:
This work aims to study the cytocompatibility of protective coatings obtained in argon and nitrogen atmospheres on a TiNi surface. Particular attention is paid to comparing the interaction of cell cul
... More
Source: Materials. 2022. Vol. 15, № 19. P. 6861 (1-15)
Type: статьи в журналах
Date: 2022
Description:
This paper studies the impact of the mass fraction of NiTi–TiB2 particles obtained by the method of self-propagating high-temperature synthesis (SHS) on the phase composition, structure, and mechanica
... More
Source: Materials. 2022. Vol. 15, № 23. P. 8450 (1-28)
Type: статьи в журналах
Date: 2022
Description:
It is known that the presence of oxygen phases in hard materials leads to an undesirable decrease in the mechanical properties. In materials based on AlMgB14, the main oxygen impurity is spinel MgAl2O
... More
Source: FirePhysChem. 2022. Vol. 2, № 4. P. 382-387
Type: статьи в журналах
Date: 2022
Description:
The problem of utilization of solid rocket motors (SRM) large-sized charges is a relevant objective. This is due to the decommissioning of SRM that failed or were rejected during production and operat
... More
Source: Applied sciences. 2022. Vol. 12, № 22. P. 11505 (1-10)
Type: статьи в журналах
Date: 2022
Description:
A mathematical model for estimating the characteristics of the process of thermal inactivation of vegetative bacterial cells and their spores is presented. The model relates the change rate of the num
... More
