Электронная библиотека (репозиторий) Томского государственного университета
Lychagin, Dmitry V.

Add to Quick Collection   All 30 Results

Showing items 1 - 15 of 30.
Sort:
 Add All Items to Quick Collection
Source: Light metals 2020. Cham, 2020. P. 465-470
Type: статьи в сборниках
Date: 2020
Description: The paper presents a study on the effect of adding a small amount of particles to a technically pure aluminum alloy on its structure and mechanical properties. For this purpose laboratory castings of ... More
Source: Inorganic materials: applied research. 2018. Vol. 9, № 2. P. 192-196
Type: статьи в журналах
Date: 2018
Description: Specimens of Al–Mg alloy 1560 of ultrafine-grained structure were obtained by the method of severe plastic deformation based on multiple equal-channel angular pressing. Impact on physical and mechanic ... More
Source: XII международная конференция "Механика, ресурс и диагностика материалов и конструкций" : сборник материалов (Екатеринбург, 21-25 мая 2018 г.). Екатеринбург, 2018. С. 210
Type: статьи в сборниках
Date: 2018
Source: Tribology international. 2018. Vol. 119. P. 1-18
Type: статьи в журналах
Date: 2018
Description: This paper studies Hadfield steel single crystals with the orientation of the normal load axis and friction axis . The chosen orientation implies that deformation develops by slip and twinning. Analys ... More
Source: Metals. 2018. Vol. 8, № 7. P. 559 (1-13)
Type: статьи в журналах
Date: 2018
Description: Integrated assessment of the influence of an ultrafine mixture TiO2 + ZrO2 + Na3AlF6 on the formation of the structure, mechanical properties, and strengthening of ductile cast iron was made in the pa ... More
Source: Письма о материалах. 2018. Т. 8, № 4. С. 415-418
Type: статьи в журналах
Date: 2018
Description: Investigation of the effect of crystallographic orientation on mechanical properties, behavior under loading, or deformation relief of single crystals is topical. One of the methods that make it possi ... More
Source: AIP Conference Proceedings. 2018. Vol. 2051. P. 020180-1-020180-4
Type: статьи в журналах
Date: 2018
Description: Abrasive wear is not favorable for Hadfield steel. The connection between the acoustic emission signal and the
Source: Wear. 2018. Vol. 410/411. P. 210-221
Type: статьи в журналах
Date: 2018
Description: The crystalline lattice reorientation in copper single crystals resulted from friction-induced subsurface deformation has been studied by means of electron back scattering diffraction as well as optic ... More
Source: Wear. 2017. Vol. 374-375. P. 5-14
Type: статьи в журналах
Date: 2017
Description: Hadfield steel is characterized both by high wear-resistance and ability to strain hardening. Due to these properties Hadfield steel is widely used in various industrial applications. The present inve ... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 142. P. 012053 (1-7)
Type: статьи в журналах
Date: 2016
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 125. P. 012033 (1-11)
Type: статьи в журналах
Date: 2016
Description: The article presents results of studies on the effect of pre-lathed surface micro-relief on surface micro-hardness after ultrasonic plastic treatment, as well as the effect of ultrasonic treatment on ... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 142. P. 012098 (1-7)
Type: статьи в журналах
Date: 2016
Description: The results of experimental research into dry sliding friction of Hadfield steel single crystals involving registration of acoustic emission are presented in the paper. The images of friction surfaces ... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 125. P. 012004 (1-7)
Type: статьи в журналах
Date: 2016
Description: We used the scanning electron microscopy and the electron backscattered diffraction to investigate a deformation relief and a crystallographic disorientation of a nickel [001] single crystal with {100 ... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 142. P. 012052 (1-6)
Type: статьи в журналах
Date: 2016
Description: This work presents a detailed analysis of segmentation process in FCC single crystals with compression axis [110] and side faces( ̅110) and (001) considering effect of octahedral shear crystal-geometr ... More
Source: IOP Conference Series: Materials Science and Engineering. 2016. Vol. 125. P.012030 (1-6)
Type: статьи в журналах
Date: 2016
Description: The article considers some issues of increasing efficiency of manufacturing preparation as a part of manufacturing processes design at a machine building enterprise. A tree of routing manufacturing pr ... More
^