Электронная библиотека (репозиторий) Томского государственного университета
Chankitmunkong, Suwaree

Add to Quick Collection   All 9 Results

Showing items 1 - 9 of 9.
  • «
  • ←
  • 1
  • →
  • »
Sort:
 Add All Items to Quick Collection
Add   Synergetic grain refinement and ZrB 2 hardening in in-situ ZrB 2/AA4032-type composites by ultrasonic assisted melt treatment
Authors: Chankitmunkong, Suwaree | Eskin, Dmitry G. | Limmaneevichitr, Chaowalit | Pandee, Phromphong
Source: Journal of materials research and technology. 2023. Vol. 24. P. 2879-2890
Type: статьи в журналах
Date: 2023
Description: In this work, the effects of ultrasonic treatment on in-situ ZrB2 particle-reinforced AA4032-based composites were studied. The composites were synthesized from AleK2ZrF6eKBF4 system via an in-situ me ... More
Add   Characterization of the anodic film and corrosion resistance of an A535 aluminum alloy after intermetallics removal by different etching time
Authors: Chankitmunkong, Suwaree | Eskin, Dmitry G. | Limmaneevichitr, Chaowalit | Kengkla, Nattarat | Diewwanit, Onnjira
Source: Metals. 2022. Vol. 12, № 7. P. 1140 (1-19)
Type: статьи в журналах
Date: 2022
Description: The objective of this study was to improve the corrosion resistance of an A535 alloy by removing intermetallics on the alloy surface by alkaline etching to improve the morphologies and properties of t ... More
Add   Effect of homogenization on anodic film and electrochemical behavior of an A535 alloy after sealing with stearic sealant
Authors: Chankitmunkong, Suwaree | Eskin, Dmitry G. | Limmaneevichitr, Chaowalit | Pandee, Phromphong | Kengkla, Nattarat | Athchasiri, Jirakit | Tanawansombat, Tanawat | Parnlasarn, Napadol | Diewwanit, Onnjira
Source: Light metals 2022 The Minerals, metals & materials series. Cham, 2022. . P. 221-227
Type: статьи в сборниках
Date: 2022
Description: Almag 35 (A535) is a commercial aluminum alloy intended for a number of marine components, which is mainly justified by its excellent castability and corrosion resistance. However, the most important ... More
Add   Effects of ultrasonic melt processing on microstructure, mechanical properties, and electrical conductivity of hypereutectic Al–Si, Al–Fe, and Al–Ni alloys with Zr additions
Authors: Chankitmunkong, Suwaree | Eskin, Dmitry G. | Limmaneevichitr, Chaowalit
Source: Light metals 2021. Cham, 2021. P. 192-197
Type: статьи в сборниках
Date: 2021
Description: Ultrasonic melt processing (USP) technique was used to study the effect of Zr addition on the structure refinement and mechanical properties of hypereutectic binary alloy in three different alloys (Al ... More
Add   Microstructure evolution of an Al–Fe–Ni alloy with Zr and Sc additions upon different cooling rates during solidification for improving the mechanical and electrical conductivity properties
Authors: Chankitmunkong, Suwaree | Eskin, Dmitry G. | Limmaneevichitr, Chaowalit
Source: Light metals 2021. Cham, 2021. P. 232-238
Type: статьи в сборниках
Date: 2021
Description: Al–Fe–Ni eutectic alloys have high potential for being alternative aluminum alloys for various electronic and electrical applications instead of conventional low-conductivity Al casting alloys. Furthe ... More
Add   Constitutive behavior of an AA4032 piston alloy with Cu and Er additions upon high-temperature compressive deformation
Authors: Chankitmunkong, Suwaree | Eskin, Dmitry G. | Limmaneevichitr, Chaowalit
Source: Metallurgical and materials transactions A. 2020. Vol. 51A, № 1. P. 467-481
Type: статьи в журналах
Date: 2020
Description: Aluminum piston alloys of the AA4032 type are produced by direct-chill (DC) casting and
Add   Structure modification upon ultrasonic processing of an AA4032 piston alloy: comparison of permanent mold and direct-chill casting
Authors: Chankitmunkong, Suwaree | Eskin, Dmitry G. | Limmaneevichitr, Chaowalit
Source: Metallurgical and materials transactions A. 2020. Vol. 51A, № 2. P. 818-829
Type: статьи в журналах
Date: 2020
Description: Piston Al-Si alloys have very complex compositions and multi-phase heterogeneous structure, so it is necessary to control the formation of primary and eutectic compounds. In this study, the ultrasonic ... More
Add   Effect of Cu addition on the microstructure, mechanical and thermal properties of a piston Al-Si alloy
Authors: Chankitmunkong, Suwaree | Eskin, Dmitry G. | Limmaneevichitr, Chaowalit
Source: Light metals 2019. Cham, 2019. P. 463-469
Type: статьи в сборниках
Date: 2019
Description: Piston Al-Si alloys are widely used for high-temperature applications especially in automotive industry. Copper is one of the most important elements for improving the strength at room and elevated te ... More
Add   Microstructure and elevated temperature mechanical properties of a direct-chill cast AA4032 alloy with copper and erbium additions
Authors: Eskin, Dmitry G. | Patakham, Ussadawut | Limmaneevichitr, Chaowalit | Chankitmunkong, Suwaree
Source: Journal of alloys and compounds. 2019. Vol. 782. P. 865-874
Type: статьи в журналах
Date: 2019
Description: Billets from an AA4032 alloy are usually produced by direct-chill (DC) casting to subsequently manufacture piston components by hot forging process. This work presents the effect of combined copper (C ... More
  • «
  • ←
  • 1
  • →
  • »
^