Add to Quick Collection
All 14 Results
Showing items 1 - 14 of 14.
Add All Items to Quick Collection
Source: Physica scripta. 2023. Vol. 98, № 2. P. 025703
Type: статьи в журналах
Date: 2023
Description:
AlMgB14 materials were obtained by hot-pressing of the prereacted AlMgB14 powder. The phase composition, structure, hardness and flexural strength have been studied. The XRD studies shown that the pha
... More
Source: Coatings. 2023. Vol. 13, № 4. P. 722 (1-9)
Type: статьи в журналах
Date: 2023
Description:
Hydroxyapatite coatings were deposited for 1, 2, and 3 h on NiTi substrates using plasmaassisted radio frequency sputtering. The matrix consisted of NiTi B2 and NiTi B19’ phases and Ti2Ni, Ni3Ti, and
... More
Authors:
Ban, Yijie |
Zhou, Meng |
Zhang, Yi |
Jia, Yanlin |
Pang, Yong |
Li, Yunzhang |
Tang, Shunlong |
Li, Xu |
Volinsky, Alex A. |
Marchenko, Ekaterina S.
Source: Materials and design. 2023. Vol. 228. P. 111819 (1-10)
Type: статьи в журналах
Date: 2023
Description:
In the present work, the Cu-1.35Ni-1Co-0.55Si alloy with multiple twins and ultra-low interfacial mismatch precipitates was obtained by liquid nitrogen dynamic plastic deformation (DPD) and aging trea
... More
Authors:
Tang, Shunlong |
Zhou, Meng |
Zhang, Yi |
Xu, Deye |
Zhang, Zhiyang |
Zheng, Xianhua |
Li, De |
Li, Xu |
Tian, Baohong |
Jia, Yanlin |
Liu, Yong |
Volinsky, Alex A. |
Marchenko, Ekaterina S.
Source: Materials science and engineering A. 2023. Vol. 871. P. 144910 (1-16)
Type: статьи в журналах
Date: 2023
Description:
In this paper, new Cu–Ni–Sn–Ti–Cr and Cu–Ni–Sn–Ti–Cr–Ce alloys were prepared and studied. After solution treatment and 60% cold rolling, the Cu–Ni–Sn–Ti–Cr alloy with micro-hardness of 221 HV, a tensi
... More
Source: Materials. 2023. Vol. 16, № 7. P. 2581 (1-13)
Type: статьи в журналах
Date: 2023
Description:
Coatings based on calcium phosphate with thicknesses of 0.5 and 2 µm were obtained by high-frequency magnetron sputtering on NiTi substrates in an argon atmosphere. The coating was characterized using
... More
Source: Shape memory and superelasticity. 2023. Vol. 9, № 4. P. 615-625
Type: статьи в журналах
Date: 2023
Description:
The shape memory effect (SME) during stressassisted thermal cycles under compressive load in [001]-oriented Ti-50.7at.%Ni and Ti-51.7at.%Ni single crystals aged at 823 K for 1 h has been studied. Ti3N
... More
Authors:
Marchenko, Ekaterina S. |
Baigonakova, Gulsharat A. |
Khrustalev, Anton P. |
Zhukov, Ilya A. |
Vorozhtsov, Alexander B. |
Chekalkin, Timofey L. |
Monogenov, Alexander N. |
Garin, Alexander S. |
Kim, Tae-Woo |
Kang, Seung-Baik
Source: Materials Chemistry and Physics. 2023. Vol. 295. P. 126959 (1-9)
Type: статьи в журналах
Date: 2023
Description:
This work aims to study microstructural features, phase composition, topology, surface potential, and the biodegradation performance of Mg–4Zn–1Ca-based alloys whose melts were ultrasonically (US) tre
... More
Source: Materials. 2023. Vol. 16, № 18. P. 6175 (1-11)
Type: статьи в журналах
Date: 2023
Description:
In the present paper, the cyclic stability of the high-temperature two-way shape memory effect was studied in high-strength Ni50.3Ti32.2Hf17.5 polycrystals after various thermomechanical treatments—tr
... More
Source: Materials and manufacturing processes. 2023. Vol. 38, № 6. P. 659-667
Type: статьи в журналах
Date: 2023
Description:
Porous NiTi alloys were obtained by self-propagating high-temperature synthesis (SHS) using layer-bylayer combustion in closed and open gas flow reactors under a protective argon atmosphere. The maxim
... More
Source: Vacuum. 2023. Vol. 207. P. 111630 (1-8)
Type: статьи в журналах
Date: 2023
Description:
The study addresses the control of the biodegradation rate of the magnesium–zinc–calcium (Mg–Ca–Zn) alloy, and improvement of its biocorrosion resistance and cytocompatibility using titanium nitride (
... More
Source: Cancer treatment and research communications. 2023. Vol. 34. P. 100681 (1-4)
Type: статьи в журналах
Date: 2023
Description:
We describe a case of a woman with invasive IB2 cervical cancer who desired to maintain fertility and required complex treatment. The suggested surgical approach with uterine transposition improves th
... More
Source: Surface and coatings technology. 2023. Vol. 473. P. 129982 (1-9)
Type: статьи в журналах
Date: 2023
Description:
The problem of using magnesium in medicine is biodegradation, which leads to the loss of the implant mechanical integrity before the bone tissue formation. Doping and subsequent coating deposition is
... More
Source: Journal of materials engineering and performance. 2023. Vol. 32, № 21. P. 9665-9670
Type: статьи в журналах
Date: 2023
Description:
The effect of stress-induced martensite aging on the microstructure, viscoelastic properties, and one-way and two-way shape memory effect in high-temperature Ni50.2Ti37.3Hf12.5 aged polycrystals in te
... More
Source: Inorganic materials. 2023. Vol. 59, № 2. P. 123-133
Type: статьи в журналах
Date: 2023
Description:
We have studied characteristic structural features of PTM-1 and PTS-1 titanium powders and related porous materials prepared by sintering the powders and determined quantitative characteristics of the
... More
