Электронная библиотека (репозиторий) Томского государственного университета
2023 | Marchenko, Ekaterina S. | Volinsky, Alex A.

Add to Quick Collection   All 5 Results

Showing items 1 - 5 of 5.
  • «
  • ←
  • 1
  • →
  • »
Sort:
 Add All Items to Quick Collection
Add   Surface structure and properties of hydroxyapatite coatings on NiTi substrates
Authors: Marchenko, Ekaterina S. | Dubovikov, Kirill M. | Baigonakova, Gulsharat A. | Gordienko, Ivan I. | Volinsky, Alex A.
Source: Coatings. 2023. Vol. 13, № 4. P. 722 (1-9)
Type: статьи в журналах
Date: 2023
Description: Hydroxyapatite coatings were deposited for 1, 2, and 3 h on NiTi substrates using plasmaassisted radio frequency sputtering. The matrix consisted of NiTi B2 and NiTi B19’ phases and Ti2Ni, Ni3Ti, and ... More
Add   Abnormally high work hardening ability and excellent comprehensive properties of copper alloys due to multiple twins and precipitates
Authors: Ban, Yijie | Zhou, Meng | Zhang, Yi | Jia, Yanlin | Pang, Yong | Li, Yunzhang | Tang, Shunlong | Li, Xu | Volinsky, Alex A. | Marchenko, Ekaterina S.
Source: Materials and design. 2023. Vol. 228. P. 111819 (1-10)
Type: статьи в журналах
Date: 2023
Description: In the present work, the Cu-1.35Ni-1Co-0.55Si alloy with multiple twins and ultra-low interfacial mismatch precipitates was obtained by liquid nitrogen dynamic plastic deformation (DPD) and aging trea ... More
Add   Improved microstructure, mechanical properties and electrical conductivity of the Cu–Ni–Sn–Ti–Cr alloy due to Ce micro-addition
Authors: Tang, Shunlong | Zhou, Meng | Zhang, Yi | Xu, Deye | Zhang, Zhiyang | Zheng, Xianhua | Li, De | Li, Xu | Tian, Baohong | Jia, Yanlin | Liu, Yong | Volinsky, Alex A. | Marchenko, Ekaterina S.
Source: Materials science and engineering A. 2023. Vol. 871. P. 144910 (1-16)
Type: статьи в журналах
Date: 2023
Description: In this paper, new Cu–Ni–Sn–Ti–Cr and Cu–Ni–Sn–Ti–Cr–Ce alloys were prepared and studied. After solution treatment and 60% cold rolling, the Cu–Ni–Sn–Ti–Cr alloy with micro-hardness of 221 HV, a tensi ... More
Add   Plasticity of porous NiTi alloys obtained by self-propagating high-temperature synthesis in closed and open gas flow reactors
Authors: Marchenko, Ekaterina S. | Yasenchuk, Yuriy F. | Mamazakirov, Oibek R. | Klopotov, Anatoly A. | Baigonakova, Gulsharat A. | Volinsky, Alex A. | Gunter, Sergey V.
Source: Materials and manufacturing processes. 2023. Vol. 38, № 6. P. 659-667
Type: статьи в журналах
Date: 2023
Description: Porous NiTi alloys were obtained by self-propagating high-temperature synthesis (SHS) using layer-bylayer combustion in closed and open gas flow reactors under a protective argon atmosphere. The maxim ... More
Add   Electrolyte exposure time effects on structure, composition and biocompatibility of microarc oxidation coatings on Mg-Ca-Zn alloys
Authors: Marchenko, Ekaterina S. | Shishelova, Arina A. | Butyagin, Pavel I. | Gordienko, Ivan I. | Khrustalev, Anton P. | Arbuzova, Svetlana S. | Zhukov, Ilya A. | Baigonakova, Gulsharat A. | Volinsky, Alex A.
Source: Surface and coatings technology. 2023. Vol. 473. P. 129982 (1-9)
Type: статьи в журналах
Date: 2023
Description: The problem of using magnesium in medicine is biodegradation, which leads to the loss of the implant mechanical integrity before the bone tissue formation. Doping and subsequent coating deposition is ... More
  • «
  • ←
  • 1
  • →
  • »
^