Add to Quick Collection
All 18 Results
Showing items 1 - 15 of 18.
Add All Items to Quick Collection
Source: Physica scripta. 2023. Vol. 98, № 2. P. 025703
Type: статьи в журналах
Date: 2023
Description:
AlMgB14 materials were obtained by hot-pressing of the prereacted AlMgB14 powder. The phase composition, structure, hardness and flexural strength have been studied. The XRD studies shown that the pha
... More
Source: Nanomaterials. 2023. Vol. 13, № 10. P. 1589 (1-12)
Type: статьи в журналах
Date: 2023
Description:
This paper presents the results of studies on AlMgB14-based ceramic coatings deposited on WC-Co hard alloy substrates using RF plasma sputtering. The aim of this work is to study the structure, phase
... More
Source: Ceramics International. 2022. Vol. 48, № 11. P. 16010-16014
Type: статьи в журналах
Date: 2022
Description:
In this work, a fundamental possibility of obtaining a high-entropy ceramic (HfTiCN)-TiB2 composite material by the coupled self-propagating high-temperature synthesis is shown. To search for a stable
... More
Source: Materials. 2022. Vol. 15, № 23. P. 8450 (1-28)
Type: статьи в журналах
Date: 2022
Description:
It is known that the presence of oxygen phases in hard materials leads to an undesirable decrease in the mechanical properties. In materials based on AlMgB14, the main oxygen impurity is spinel MgAl2O
... More
Source: Nanomaterials. 2022. Vol. 12, № 21. P. 3805 (1-9)
Type: статьи в журналах
Date: 2022
Description:
In this work, the structure, phase composition, hardness and tensile strength of the AlMgB14-based material obtained by spark plasma sintering (SPS) were investigated. According to the XRD results, th
... More
Source: Nanomaterials. 2022. Vol. 12, № 11. P. 1895 (1-10)
Type: статьи в журналах
Date: 2022
Description:
In this work, composite materials were obtained by spark plasma sintering of an Al12Mg17-B-Si powder mixture. The structure, phase composition, and mechanical properties of the obtained composites wer
... More
Source: AIP Conference Proceedings. 2022. Vol. 2509. P. 020142-1-020142-5
Type: статьи в журналах
Date: 2022
Description:
Based on the Rietveld method, the quantitative phase analysis was performed of AlMgB14-based materials obtained by self-propagating high-temperature synthesis (SHS) of Al12Mg17-B powder mixture using
... More
Source: Metals. 2022. Vol. 12, № 2. P. 277 (1-13)
Type: статьи в журналах
Date: 2022
Description:
In this work, magnesium-based composites were obtained by shock-wave compaction of a powder mixture of Mg-5 wt.% AlN at a shock-wave pressure of 2 GPa. Their microstructure was investigated and the ph
... More
Source: Russian journal of inorganic chemistry. 2022. Vol. 67, № 8. P. 1319-1323
Type: статьи в журналах
Date: 2022
Description:
The phase composition and structure of the composite ceramic material (HfTiCN)-TiB2 obtained from the high-entropy system Hf-Ti-C-N-B in the mode of conjugated self-propagating high-temperature synthe
... More
Source: Materials. 2021. Vol. 14, № 19. P. 5482 (1-13)
Type: статьи в журналах
Date: 2021
Description:
In this work, the process for obtaining aluminum nitride in the combustion mode of co-flow filtration of a nitrogen–argon mixture was investigated. The combustion of granules consisting of aluminum an
... More
Source: Journal of materials research and technology. 2021. Vol. 11. P. 687-692
Type: статьи в журналах
Date: 2021
Description:
In this work, AlMgB14-based materials were obtained froman (AleMg)eB powder mixture by spark plasma sintering. The microstructure, phase composition, and properties of the obtained materials were inve
... More
Source: JOM. 2021. Vol. 73, № 12. P. 3858-3865
Type: статьи в журналах
Date: 2021
Description:
The structure of the AA5056-Al3Er composite and the initial alloy was studied by optical and scanning electron microscopy. The introduction of 0.23 wt.% particles does not modify the structure of the
... More
Source: Ceramics International. 2021. Vol. 47, № 15. P. 21698-21704
Type: статьи в журналах
Date: 2021
Description:
In this work, AlMgB14 was obtained by self-propagating high temperature synthesis (SHS) using the chemical furnace based on titanium and silicon (Ti5Si3) as a source of heat energy. Structure and phas
... More
Source: Metals. 2021. Vol. 11, № 10. P. 1564 (1-12)
Type: статьи в журналах
Date: 2021
Description:
In the work, the possibility of obtaining strong welded joints of aluminum alloys modified with particles is demonstrated. For research, strengthened aluminum alloys of the Al-Mg-Mn system with the in
... More
Source: Materials. 2021. Vol. 14, № 19. P. 5521 (1-14)
Type: статьи в журналах
Date: 2021
Description:
AlMgB14-TiB2 composite materials were fabricated by self-propagating high-temperature synthesis (SHS) followed by spark plasma sintering of the obtained SHS products. It was found that, during the SHS
... More
