Электронная библиотека (репозиторий) Томского государственного университета

Add to Quick Collection   All 14 Results

Showing items 1 - 14 of 14.
  • «
  • 1
  • »
Sort:
 Add All Items to Quick Collection
Source: Light metals 2019. Cham, 2019. P. 1533-1538
Type: статьи в сборниках
Date: 2019
Description: The quantification of acoustic pressures in liquid metals is of paramount interest for the optimization of ultrasonic melt treatment (UST) of large volumes. Until recently, the measurements of acousti ... More
Source: Light metals 2019. Cham, 2019. P. 463-469
Type: статьи в сборниках
Date: 2019
Description: Piston Al-Si alloys are widely used for high-temperature applications especially in automotive industry. Copper is one of the most important elements for improving the strength at room and elevated te ... More
Source: Ultrasonics sonochemistry. 2018. Vol. 42. P. 411-421
Type: статьи в журналах
Date: 2018
Description: In an attempt to quantify the instantaneous pressure field in cavitating liquids at large forcing signals, pressures were measured in four different liquids contained in vessels with a frequency mode ... More
Source: Metallurgical and materials transactions B. 2017. Vol. 48B, № 1. P. 208-219
Type: статьи в журналах
Date: 2017
Authors: Eskin, Dmitry G.
Source: Materials Science and Technology. 2017. Vol. 33, № 6. P. 636-645
Type: статьи в журналах
Date: 2017
Description: Ultrasonic melt processing attracts since the 1930 a lot of interest both from academic researchers and industry. In the last 10 years the interest to ultrasonic melt processing grew with regard to un ... More
Source: Acta materialia. 2016. Vol. 116. P. 354-363
Type: статьи в журналах
Date: 2016
Description: The mechanism underlying the considerable refinement of primary Al3Ti intermetallic particles induced by ultrasonic treatment (UST) in an Al-0.4 wt% Ti alloy in the fully liquid state was investigated ... More
Source: Sensors and actuators A : Physical. 2016. Vol. 240. P. 57-69
Type: статьи в журналах
Date: 2016
Description: This paper describes a series of systematic experimental studies to evaluate the performance of a high-temperature cavitometer under well-controlled conditions. The cavitometer was specifically design ... More
Source: Journal of materials processing technology. 2016. Vol. 229. P. 582-586
Type: статьи в журналах
Date: 2016
Description: Currently, fundamental experimental studies in liquid metals are limited as there are very few availableexperimental tools for directly measuring acoustic cavitation in such extreme environments. In t ... More
Source: Journal of crystal growth. 2016. Vol. 435. P. 24-30
Type: статьи в журналах
Date: 2016
Description: High intensity ultrasonic melt treatment was applied to an Al–0.4 wt% Ti alloy over three selected temperature ranges: 810 to 770 °C (above liquidus), 770 to 730 °C (across liquidus), and 730 to 690 ° ... More
Source: Materials and design. 2016. Vol. 90. P. 979-983
Type: статьи в журналах
Date: 2016
Description: The application of ultrasound to casting processes is a subject of great interest: the resulting degassing, sonocrystallization, wetting, fragmentation, de-agglomeration and dispersion yield an improv ... More
Source: Journal of materials processing technology. 2015. Vol. 222. P. 148-154
Type: статьи в журналах
Date: 2015
Description: A flat plate sonotrode was used for ultrasonic melt processing (degassing) of aluminum melts. Calculations showed that this sonotrode should have several antinodes with maximum amplitude, spaced at 16 ... More
Source: Advances in materials science and engineering. 2015. Vol. 2015, Article ID 718207. P. 1-6
Type: статьи в журналах
Date: 2015
Source: Materials Science and Technology. 2015. Vol. 31, № 1. P. 79-84
Type: статьи в журналах
Date: 2015
Authors: Eskin, Dmitry G.
Source: Materials science forum. 2014. Vol. 794/796. P. 101-106
Type: статьи в журналах
Date: 2014
  • «
  • 1
  • »
^