Add to Quick Collection
All 7224 Results
Showing items 1 - 15 of 7224.
Add All Items to Quick Collection
Source: FirePhysChem. 2022. Vol. 2, № 4. P. 382-387
Type: статьи в журналах
Date: 2022
Description:
The problem of utilization of solid rocket motors (SRM) large-sized charges is a relevant objective. This is due to the decommissioning of SRM that failed or were rejected during production and operat
... More
Source: Metals. 2022. Vol. 12, № 3. P. 407 (1-2)
Type: статьи в журналах
Date: 2022
Description:
It is known that metallurgy influences almost all sectors of industry, including energy, aeronautics, automotive, space, chemical, machinery, scientific equipment, construction, packaging, electrical,
... More
Source: Surface and coatings technology. 2022. Vol. 436. P. 128291 (1-12)
Type: статьи в журналах
Date: 2022
Description:
In the study, gradient coatings with a nanometer thickness were successfully synthesized from Ti/Ni/Ti nanolaminates on the TiNi substrate in a nitrogen atmosphere at 900 °C. A technique for producing
... More
Source: Light metals 2022. Cham, 2022. P. 97-103
Type: статьи в сборниках
Date: 2022
Description:
The paper investigates the effect of tungsten nanoparticles on the structure and mechanical properties of aluminum 5056 alloy. Using optical and scanning electron microscopy, the structure of the AA50
... More
Source: Nanomaterials. 2022. Vol. 12, № 11. P. 1895 (1-10)
Type: статьи в журналах
Date: 2022
Description:
In this work, composite materials were obtained by spark plasma sintering of an Al12Mg17-B-Si powder mixture. The structure, phase composition, and mechanical properties of the obtained composites wer
... More
Source: Nanomaterials. 2022. Vol. 12, № 21. P. 3805 (1-9)
Type: статьи в журналах
Date: 2022
Description:
In this work, the structure, phase composition, hardness and tensile strength of the AlMgB14-based material obtained by spark plasma sintering (SPS) were investigated. According to the XRD results, th
... More
Source: Metals. 2022. Vol. 12, № 2. P. 206 (1-14)
Type: статьи в журналах
Date: 2022
Description:
The paper addresses the production and investigation of the Mg–Ca–Zn alloy dispersionhardened by diamond nanoparticles. Structural studies have shown that diamond nanoparticles have a modifying effect
... More
Source: Materials. 2022. Vol. 15, № 15. P. 5327 (1-12)
Type: статьи в журналах
Date: 2022
Description:
This article considers issues pertinent to the research of the phase composition, structure and mechanical properties of materials obtained from powders of composite (Ni-Ti)-TiB2, which have prospecti
... More
Source: Metals. 2022. Vol. 12, № 2. P. 277 (1-13)
Type: статьи в журналах
Date: 2022
Description:
In this work, magnesium-based composites were obtained by shock-wave compaction of a powder mixture of Mg-5 wt.% AlN at a shock-wave pressure of 2 GPa. Their microstructure was investigated and the ph
... More
Source: Materials. 2022. Vol. 15, № 23. P. 8450 (1-28)
Type: статьи в журналах
Date: 2022
Description:
It is known that the presence of oxygen phases in hard materials leads to an undesirable decrease in the mechanical properties. In materials based on AlMgB14, the main oxygen impurity is spinel MgAl2O
... More
Source: Metals. 2022. Vol. 12, № 3. P. 525 (1-10)
Type: статьи в журналах
Date: 2022
Description:
This research work studies the structural phase parameters and physicomechanical properties of metal-matrix composite materials based on a Ni–TiB2 system obtained by additive manufacturing (specifical
... More
Source: Optics and spectroscopy. 2022. Vol. 130, № 8. P. 471-479
Type: статьи в журналах
Date: 2022
Description:
Ignition of Al conglomerate particles and Al-, B-, and AlBn-based dispersed fuels under radiant heating by a cw CO2 laser with heat flux densities q = 65-190 W/cm(2) is experimentally studied. Based o
... More
Source: Metals. 2022. Vol. 12, № 11. P. 1956 (1-13)
Type: статьи в журналах
Date: 2022
Description:
This work studies the process feasibility of milling a metal-matrix composite based on Inconel 625 with added NiTi-TiB2 fabricated by direct laser deposition. The composite is intended for manufacturi
... More
Source: Metals. 2022. Vol. 12, № 6. P. 989 (1-11)
Type: статьи в журналах
Date: 2022
Description:
This paper investigates the impact of tungsten nanoparticles on the microstructure and mechanical properties of the Al-5Mg alloy. Tungsten concentrations of up to 0.5 wt.% led to a slight modification
... More
Source: Materials. 2022. Vol. 15, № 19. P. 6861 (1-15)
Type: статьи в журналах
Date: 2022
Description:
This paper studies the impact of the mass fraction of NiTi–TiB2 particles obtained by the method of self-propagating high-temperature synthesis (SHS) on the phase composition, structure, and mechanica
... More
