Effect of surfactant on gas-dynamic liquid dispersion by an ejective sprayer with a gas passage in the form of a convergent nozzle
|
| 1
|
Effect of surfactants on rising dynamics of a single gas bubble
|
| 1
|
The effect of synthesis conditions of emulsifier on the properties of oil-based drilling muds
|
| 1
|
Effect of tantalum on the tensile properties of 12%Cr martensitic steels for steam blades
|
| 1
|
The effect of temperature difference between the particle and medium on the hydrodynomic drag coefficient
|
| 1
|
The effect of temperature inhomogeneity on the concentration of impurities in a street canyon
|
| 1
|
Effect of temperature of heat treatment in nitrogen atmosphere on physicochemical and electrochemical properties of petroleum coke
|
| 1
|
Effect of temperature on parameters of microstructure and microhardness of dispersion-strengthened V-Cr-Zr-W-alloy after deformation by torsion under pressure
|
| 1
|
Effect of temperature on the magnetic permeability of hexagonal ferrites
|
| 1
|
Effect of temperature, strain, and strain rate on the flow stress of aluminum under shock-wave compression
|
| 1
|
The effect of the addition of the hygroscopic salt of MgSO4 on the physicochemical properties of an aluminum oxide-based adsorbent
|
| 1
|
The effect of the additive KNO3 on the thermodynamic characteristics of the mixed composition
|
| 1
|
Effect of the amount of complexing agent on the catalytic properties of copper-zinc-aluminum catalysts of СО steam conversion obtained by the mechanochemical method
|
| 1
|
Effect of the barrier thickness on the optical properties of InGaN/GaN/Al2O3 (0001) LED heterostructures
|
| 1
|
Effect of the buoyancy force on natural convection in a cubical cavity with a heat source of triangular cross-section
|
| 1
|
The effect of the chemical nature of emulsifiers of some fatty acid derivatives and ethanolamines on the oil-based drilling fluids properties
|
| 1
|
Effect of the content of silicon on the optical properties of Al–Si–N coatings irradiated with carbon ions in the short-pulse implantation mode
|
| 1
|
The effect of the Coriolis force and wind on the dynamics of the fall thermal bar
|
| 2
|
Effect of the features of functionalized structure on elastic properties and strength of partially-filled brittle porous materials
|
| 1
|
Effect of the heat treatment on martensitic transformations in single crystals of iron-based alloy
|
| 1
|
The effect of the heat treatment regime on the structure and physical-mechanical properties of a 23X15KT hard magnetic alloy
|
| 1
|
Effect of the KK̅ and ηη channels and interference phenomena in the two-pion and KK̅ transitions of charmonia and bottomonia
|
| 1
|
Effect of the mass fraction of NiTi–TiB2 SHS-particles on the phase composition, structure, and mechanical properties of inconel 625–NiTi–TiB2 composites produced by direct laser deposition
|
| 1
|
The effect of the maternal tree age on growth and development of mutational witches' broom clones in Pinus sibirica Du Tour
|
| 1
|
Effect of the metal-support interaction in Ag/CeO2 catalysts on their activity in ethanol oxidation
|
| 1
|
Effect of the mineral composition of basal medium on the growth and cultivation of Lonicera caerulea L. explants in vitro
|
| 1
|
The effect of the mode of gas preionization on the parameters of runaway electrons in high-pressure discharges
|
| 1
|
The effect of the oil resin on the properties of solution of the petroleum wax treated in an ultrasonic field
|
| 1
|
Effect of the polymer component on biocompatibility and physicochemical properties of porous zirconium ceramics
|
| 1
|
Effect of the reaction mixture on the structure and permeability of macroporous SiO2, obtained by sol gel by method
|
| 1
|
The effect of the reactor type on the structural features of titanium nickelide produced by the SHS method in argon atmosphere
|
| 1
|
Effect of the segmented fin height on the air-side performance of serrated welded spiral fin-and-tube heat exchangers
|
| 1
|
Effect of the strain rate on the low cycle fatigue behavior of a 10Cr-2W-Mo-3Co-NbV steel at room temperature
|
| 1
|
Effect of the stress-induced martensite aging time on the functional properties of heterophase Ni49Fe18Ga27Co6 single crystals
|
| 1
|
Effect of the surface oxide layer on shape memory effect and superelasticity of [011]-oriented Ti-50.1Ni single crystals
|
| 1
|
Effect of the surfaces of Zn3(PO4)2:Mn2+ phosphors on their luminescent properties
|
| 1
|
Effect of the thermophysical properties of the working fluid on the structure of a convective flow in a cubical cavity with non-uniform heating
|
| 1
|
Effect of the time‑dependent volumetric heat flux on heat transfer performance inside a heat sink based on the phase change materials
|
| 1
|
Effect of the transverse load shape on the stress-strain state of the ice cover
|
| 1
|
Effect of the type of active component–support interaction on the low-temperature activity of metal-oxide catalysts in CO oxidation
|
| 1
|
Effect of the various factors on the chloroplast atpB operon genes transcription
|
| 1
|
Effect of the ηη channel and interference phenomena in the two-pion transitions of charmonia and bottomonia
|
| 1
|
Effect of thermal annealing on electrical characteristics of Ga2Oy-GaAs structures
|
| 1
|
The effect of thermal annealing on the properties of the structures GaxOy/n-GaAs
|
| 1
|
Effect of thermal conductivity and emissivity of solid walls on time-dependent turbulent conjugate convective-radiative heat transfer
|
| 1
|
The effect of thermal cycling and stress-assistant ageing two-way shape memory effect in [123]-oriented Co40Ni33Al27 single crystals
|
| 1
|
Effect of thermal stratification on free convection in a square porous cavity filled with a nanofluid using Tiwari and Das' nanofluid model
|
| 1
|
Effect of thermal treatment on regularity of thermoelastic martensitic transformations in TiNiHfPd single crystals in compression
|
| 1
|
The effect of thermal treatment on the change of functional properties in Ni50,3Ti32,2Hf17,5 polycrystals
|
| 1
|
Effect of thermomechanical treatment modes on structural-phase states and mechanical properties of metastable austenitic steel
|
| 1
|
The effect of thermomechanical treatment regimes on microstructure and mechanical properties of V-Me(Cr, W)-Zr-C alloys
|
| 1
|
Effect of thermomechanical treatments on the formation of submicrocrystalline structural states and mechanical properties of metastable austenitic steel
|
| 1
|
Effect of thermophysical properties of solid walls on turbulent modes of complex heat transfer in an enclosure
|
| 1
|
Effect of thickness of titanium nickelide wire on mechanical characteristics
|
| 1
|
Effect of TiC particles on the microstructure and microhardness of Ni3Al obtained by spark plasma sintering
|
| 1
|
Effect of time-dependent wall temperature on natural convection of a non-Newtonian fluid in an enclosure
|
| 1
|
Effect of TiO2 content on the synthesis and physicochemical properties of thin-film calcium phosphate materials
|
| 1
|
Effect of titanium oxide on properties of materials, film-forming solution obtained from the system on the basis of SiO2-CaO-P2O5-TiO2
|
| 1
|
Effect of training with feedback on static and dynamic balance in students with health limitations
|
| 1
|
The effect of transition metal substitution in the perovskite-type oxides on the physicochemical properties and the catalytic performance in diesel soot oxidation
|
| 1
|
Effect of trapezoidal discrete heater sizes on evolution of laminar thermal plumes in enclosures
|
| 1
|
Effect of trapezoidal heater on natural convection heat transfer and fluid flow inside a cubical cavity
|
| 1
|
Effect of treadmill running exercise training on the content of myokines in the skeletal muscles of mice with type II diabetes mellitus model
|
| 1
|
Effect of treatment modes on the microstructure parameters of heat-resistant 12% chromium ferritic-martensitic steels EK-181 and EP-823
|
| 1
|
Effect of turbulence and air velocity on radon progenys
|
| 1
|
Effect of turbulent pulsations on the fractional separation of fine powders of metal nitrides
|
| 1
|
Effect of ultradispersed TiO2, ZrO2 and cryolite powders on hardening of СЧ25 (Russian grade) cast iron
|
| 1
|
Effect of ultrafine powders on the structural formation processes and mechanical properties of Al7%Si alloy
|
| 1
|
Effect of ultrasonic melt treatment on the refinement of primary Al3Ti intermetallic in an Al–0.4Ti alloy
|
| 1
|
Effect of ultrasonic melt treatment on the sump profile and microstructure of a direct-chill cast AA6008 aluminum alloy
|
| 1
|
Effect of ultrasonic treatment and polymer additive on structural-mechanical properties of solutions of paraffinic hydrocarbons
|
| 1
|
Effect of ultrasonic treatment on electromagnetic properties of composites based on multiwall carbon nanotubes at microwave frequency range
|
| 1
|
Effect of ultrasonic treatment on permittivity of composites based on mul tiwall carbon nanotubes
|
| 1
|
Effect of ultrasonic treatment on the permittivity of composites with carbon nanotubes
|
| 1
|
Effect of ultrasonic treatment on the properties of highly paraffinic crude oil and composition of the dispersed phase
|
| 1
|
Effect of ultrasonic treatment on the X-band microwave absorption of multiwalled carbon nanocomposite
|
| 1
|
Effect of ultrasound exposure duration on the state of microcirculation and hemostasis system in rats
|
| 1
|
Effect of uniform inclined magnetic field on mixed convection in a lid-driven cavity having a horizontal porous layer saturated with a ferrofluid
|
| 1
|
Effect of vacuum conditions and plasma concentration on the chemical composition and adhesion of vacuum-plasma coatings
|
| 1
|
Effect of van der Waals interactions on the structural and binding properties of GaSe
|
| 1
|
The effect of van der Waal’s gap expansions on the surface electronic structure of layered topological insulators
|
| 1
|
Effect of viscous dissipation on temperature, viscosity, and flow parameters while filling a channel
|
| 1
|
The effect of volume inclusions of the ZnGeP2 single-crystal on the dispersion of the refraction index and the absorption coefficient in mid-IR and terahertz ranges of wavelengths
|
| 1
|
Effect of warm acclimation rate on fatty acid composition and phase transitions of Saccharina japonica (J.E. Areschoug) glycolipids
|
| 1
|
The effect of warm deformation by abc-pressing method on mechanical properties of titanium nickelide
|
| 1
|
Effect of warm multidirectional forging on the microstructure and mechanical properties of a high-nitrogen austenitic steel
|
| 1
|
Effect of warm rolling on grain refinement and mechanical properties of austenitic stainless steel
|
| 1
|
Effect of water-soluble polysaccharides plant extraction of the Saussurea genus on the activity of mice peritoneal macrophage NO-synthase
|
| 1
|
The effect of weaning diet type on grey mullet (Mugil cephalus) juvenile performance during the trophic shift from carnivory to omnivory
|
| 1
|
Effect of wheat seed bacterization on the peroxidase activity under high temperature
|
| 1
|
Effect of wheat seed bacterization with Pseudomonas extremorientalis PhS1 on peroxidase activity under simulated reduced temperatures
|
| 1
|
Effect of wood structure geometry during firebrand generation in laboratory scale and semi-field experiments
|
| 1
|
Effect of zink oxyde nanoparticles on the test function of water organisms of different trophic levels
|
| 1
|
Effect of zirconia additives on the activity of the Cr/SiO2 catalyst in isobutane dehydrogenation
|
| 1
|
Effect of ZnO nanoparticles’ concentration on biometric parameters of wheat seedlings
|
| 1
|
Effect on the microstructure of deposit metal nanostructured powders
|
| 1
|
Effect Trichoderma spp on wheat (Triticum aestivum)
|
| 1
|
Effective algorithm for finding shortest paths in dense Gaussian networks
|
| 1
|
Effective atom-atom potentials for H2O-He and H2O-Ar systems
|
| 1
|
Effective carbon nanotube/phenol formaldehyde resin based double-layer absorbers of microwave radiation: design and modeling
|
| 1
|